• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.299-305
• /
• 2019

As the damage factors of the three­storey stone pagoda of the Bulguksa Temple in Gyeongju could cause a reduction in the historical and artistic value and accelerate the deterioration of the stone, an appropriate solution is needed. The aim of stone conservation is to conserve the original shape and convey originality from the ancestors to their descendants. This procedure includes a record of the condition, being available in the future. In particular, the damage assessment could be used in conservational research, educational data, conservational treatment, and preventive data. As a result of quantitative damage assessment, biological damage indicated 159 %, chemical damage 114 %, and physical damage 16 %. The west direction revealed 95 % because of the amount of sunshine, moisture, and expansion of rock. Complex factors and high range damage were observed on the foundation and body of the pagoda. Since the top of pagoda was restored in the 1970s, the state presented a good condition. By doing this, the number of organisms could be reduced by cleaning and the physical damage could be minimized by bonding. On the other hand, continuous monitoring will be needed because there is a possibility of reforming the damage in the future.

• Physical Therapy Korea
• /
• v.13 no.3
• /
• pp.24-32
• /
• 2006

Theoretical framework of motor learning is used to enhance perceptual motor skill in physical therapy intervention, which can be subdivided into two main types-explicit and implicit. The purpose of this study was to examine whether stroke patients with unilateral brain damage learn implicitly a motor skill using the arm ipsilateral to the damaged hemisphere. Speculation then followed as to the formation of therapeutic plans and instructions provided to patients with stroke. 20 patients with stroke and 20 normal participants were recruited. All the subjects practiced serial reaction time tasks for 30 minutes a day and retention tests on the following day. The tasks and tests involved pressing the corresponding buttons to 4 colored circles presented on a computer screen as quickly and accurately as possible. Patients with stroke responded more slowly than controls. However, both groups showed decreased reaction time in the experimental and retention periods. Also, there was no significant difference between both groups regarding explicit knowledge of consecutive order. Therefore, patients with stoke had the ability to learn implicitly a perceptual motor skill. Prescriptive instruction using implicit and explicit feedback may be beneficial for motor skill learning in physical therapy intervention for patients with brain damage.

• Journal of Life Science
• /
• v.20 no.6
• /
• pp.870-876
• /
• 2010

The purpose of this study was to examine the effect of kinesio taping on muscle strength and changes of muscle fatigue and damage. 10 male subjects participated in 1-RM and isometric cybex muscle strength tests with and without taping application. Muscle strength (bench press, leg press) and extension (knee, shoulder) strength were significantly increased after taping, but there was no significant difference in flexion (knee, shoulder) strength. The concentration of fatigue factors (ammonia, phosphorous), muscle damage index substances (CK, LDH), IGF-I and creatinine were reduced after taping, but there were no significant differences.

• Corrosion Science and Technology
• /
• v.12 no.5
• /
• pp.239-244
• /
• 2013

Marine equipment exposed to harsh environments requires not only excellent corrosion resistance but also improvement of physical characteristics against natural material degradation. With growing interests in ocean energy resources, the higher reliability for marine equipment has become more important in terms of material characteristics. ALBC3 alloy represents excellent corrosion resistance and is widely used in corrosive environments. However, cavitation damage occurs frequently due to its poor durability in high flow rate of marine environment. In this research, shot peening technology was employed as a surface modification with shot peening stand-off distance to mitigate cavitation damage. The effects of shot peening on extent of cavitation damage and weight loss were evaluated for both shot peened and non-peened specimens. The results revealed that the application of shot peeing decreased cavitation damage for all experimental conditions in comparison with the non-peened specimens. The optimum stand-off distance was determined to be 10 cm, since more than 35 % of cavitation damage reduction was observed.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.331-346
• /
• 2004

A new sensor system is proposed for measuring damage indexes. The damage index is a physical value that is well correlated to a critical damage in a device or a structure. The mechanism proposed here utilizes elastic buckling of a thin wire and does not require any external power supply for memorizing the index. The mechanisms to detect peak strain, peak displacement, peak acceleration and cumulative deformation as examples of damage indexes are presented. Furthermore, passive and active wireless data retrieval mechanisms using electromagnetic induction are proposed. The passive wireless system is achieved by forming a closed LC circuit to oscillate at its natural frequency. The active wireless sensor can transmit the data much further than the passive system at the sacrifice of slightly complicated electric circuit for the sensor. For wireless data retrieval, no wire is needed for the sensor to supply electrical power. For the active system, electrical power is supplied to the sensor by radio waves emitted from the retrieval system. Thus, external power supply is only needed for the retrieval system when the retrieval becomes necessary. Theoretical and experimental studies to show excellent performance of the proposed sensor are presented. Finally, a prototype damage index sensor installed into a 7 storey base-isolated building is explained.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.1
• /
• pp.25-28
• /
• 2007

Physical damage on fruits and vegetables caused by shock degrades the value of product in the fresh market. In order to design a product/package system to protect the product, the peak acceleration or G force to the product that causes shock damage needs to be determined. Shock cushion packaging is applied to protect goods of all kinds. It can be adapted in their shape to any product to be packed, so that its shock absorbing properties is determined by geometry of the product. The shape of a cushion can be adapted to the expected shock loads. To analyze the response properties of cushion materials for packaging of the pears for optimum packaging design during transportation, shock tests were carried out. Shock acceleration that is happened in pears were appeared very high by $25{\sim}30G$ in the input shock acceleration of 14.1618 G that was measured in transportation road. This means that the pears receive the shock acceleration more than maximum double itself and the damage by this can happen and the shock acceleration increase in case use PE tray cup and PE net in fruits, the use of corrugated fiberboard pad may become one method that it can reduce the damage by the shock in packaging of fruits.

• Fisheries and Aquatic Sciences
• /
• v.25 no.4
• /
• pp.214-230
• /
• 2022

Loss and damage have become a vital contemporary issue in climate change studies and actions in developing countries. However, studies are scant on this in the fisheries sector around the world. In Bangladesh, there is no study on the loss and damage in fisheries dependent communities. This study assesses economic and non-economic loss and damage to coastal shrimp farms due to cyclone Bulbul in Gabura Union of Shyamnagar Upazila, Satkhira district, using a mixed method approach. Results show that all shrimp farms' dependent communities are affected by cyclone Bulbul to some extent. About 14%, 57%, and 29% of the farms were totally, heavily and moderately damaged due to farm inundation and dyke damage. The estimated mean loss and damage per shrimp farm was worth USD 4,633. Around 31% and 72% of the farms' fencing nets and traps were lost, which was worth USD 333 per farm. There were also loss and damage to other resources such as houses, solar panels, livestock and agricultural crops where the estimated mean loss and damage per household was worth USD 3,170. This study reported that the rich shrimp farmers encountered proportionately more economic loss and damage than their poor counterparts. However, this does not mean that the poor suffered less. The current study found a range of non-economic loss and damage in different aspects of the shrimp farmers' household members such as unbearable mental pain, deterioration of health, physical injuries, disabilities, etc. and access to services (e.g., inadequate food, lack of safe drinking water, lack of medical facilities, disruption of education systems), social infrastructure (e.g., damage of roads and markets) and disturbance of cultural functions. The findings suggest that urgent short- and long-term actions may be taken to save the aquaculture farms and dependent livelihoods from economic and non-economic loss and damage to cyclones in future.

• Journal of the Korean Society of Safety
• /
• v.22 no.5
• /
• pp.27-32
• /
• 2007

We investigated the damage of the TTL ICs which manufactured five different technologies by artificial microwave. The artificial microwave was rated at a microwave output from 0 to 1000W, at a frequency of 2.45GHz. The microwave power was extracted into a standard rectangular waveguide(WR-340) and TTL ICs were located into the waveguide. TTL ICs were damaged two types. One is breakdown which means no physical damage is done to the system and after a reset the system is going back into function. The other is destruction which means a physical damage of the system so that the system will not recover without a hardware repair. TTL SN74S08N and SN74ALS08N devices get a breakdown and destruction occurred but TTL SN74LS08N, SN74AS08N and 74F08N devices get a destruction occurred. Also destructed TTL ICs were removed their surface and a chip conditions were analyzed by SEM. The SEM analysis of the damaged devices showed onchipwire and bondwire destruction like melting due to thermal effect. The tested results expect to be applied to the fundamental data which interprets the combination mechanism of the semiconductors from artificial microwave environment.

• Research in Community and Public Health Nursing
• /
• v.15 no.1
• /
• pp.145-154
• /
• 2004

Purpose: This study was performed to identify the extent of flood damage, the quality of life(QOL) and their relationships to flood victims. Method: The subjects of this study were 248(men 100, women 148) who live around seven areas in K province impacted by Typhoon Rusa. Data was collected between February 25 and March 21, 2003 by structured questionnaires. The instruments were composed of two parts. The extent of flood damage were the impacts of daily living by revised from Ginexi et aI.(2000). QOL was used to WHOQOL BREF Korean Version by Min et al.(2002). The SPSS program was used for its descriptive, reliability, and correlation analysis. Result: The means of the extent of flood damage were: daily living 1.88, economy 4.60, and health 3.75. The mean of total QOL was 2.95: social domain 3.29, overall satisfaction 3.09, physical domain 3.06, psychological domain 2.95, and environmental domain 2.68. The negative correlations were between the Impact of daily living and Total QOL(r=-.143, p<.05), Physical QOL(r=-.220, p<.01) and Overall satisfaction (r=-141, p<.05). Conclusion: This study has learned that the impact of the flood had negative effects on the flood victims quality of life, and the difficulties they faced in their daily lives. Further research will be needed to explore influencing factors on QOL in disaster victims.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.1
• /
• pp.139-146
• /
• 2002

This study deals with the characterizing and the application like as insulation materials in the joint part in concrete surface layer and waterproofing sheet especially for roof slabs. Using steel materials and butil-rubber tape to band waterproofing sheet and concrete surface together before this waterproofing system will be applied. It can be expected to both the curability and the watertightness by coating poly-urethane 2 or 3 times with sheet surface. Therefore this waterproofing system can be possible to protect water without the damage when vapor is going out from concrete and without air pockets because of the difference temperature inside and out. This system particularly consists of air bents and elastic waterproofing sheet considering the physical damage while water can cause purely physical damage. This system is one of the most efficient ways of waterproofing system without air pocket.