• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.115-127
• /
• 2019

The low-flow grouting injection technique, the target construction method for this study, is a method of pouring mortar into the ground by non-emission replacement principle, which can be expected to increase the density of the ground, and, in some cases, be used as a base file using the strength of the high injection solids, along with low noise, low pollution, and high durability. To verify that the dynamic characteristics of the ground are improved by the low-flow injection technique, the test work was conducted on the site and physical tests were performed, and the quality of the improvement formed in the ground was verified through the indoor test on the core and core recovery rate was analyzed. The density logs test layer calculated the volume density of the ground layer by using the Compton scattering of gamma-rays, and the sonic logs was tested on the ground around the drill hole using a detector consisting of sonar and receiver devices inside the drill hole. As a result of the measurement of the change in physical properties (density and sonic logs) before and after grouting, both properties were basically increased after infusion of grout agent. However, the variation in density increase was greater than the increase in speed after grouting, and the ground density measurement method was thought to be effective in measuring the fill effect of the filler. Strength and core recovery rates were measured from specimens taken after the age of 28 days, and the results of the test results of the diffusion and strength test of the improved products were verified to satisfy the design criteria, thereby satisfying the seismic performance reinforcement.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.3
• /
• pp.233-246
• /
• 2022

Purpose : The study aims to determine the effects of virtual and non-virtual realities in a normal person's mirror walk on gait characteristics. Methods : Twenty male adults (Age: 27.8 ± 5.8 years) participated in the study. Reflection markers were attached to the subjects for motion analysis, and they walked in virtual reality environments with mirrors by wearing goggles that showed them the virtual environments. After walking in virtual environments, the subjects walked in non-virtual environments with mirrors a certain distance away after taking a 5 min break. To prevent the order effect caused by the experiential difference of gait order, the subjects were randomly classified into groups of 10 and the order was differentiated. During each walk, an infrared camera was used to detect motion and the marker positions were saved in real time. Results : Comparison between the virtual and non-virtual reality mirror walks showed that the movable range of the leg joints (ankle, knee, and hip joints), body joints (sacroiliac and atlantoaxial joints), and arm joints (shoulder and wrist joints) significantly differed. Temporal characteristics showed that compared to non-virtual gaits, the virtual gaits were slower and the cycle time and double limb support time of virtual gaits were longer. Furthermore, spacial characteristics showed that compared to non-virtual gaits, virtual gaits had shorter steps and stride lengths and longer stride width and horizontally longer center of movement. Conclusion : The reduction in the joint movement in virtual reality compared to that in non-virtual reality is due to adverse effects on balance and efficiency during walking. Moreover, the spatiotemporal characteristics change based on the gait mechanisms for balance, exhibiting that virtual walks are more demanding than non-virtual walks. However, note that the subject group is a normal group with no abnormalities in gait and balance and it is unclear whether the decrease in performance is due to the environment or fear. Therefore, the effects of the subject group's improvement and fear on the results need to be analyzed in future studies.

• Journal of Environmental Science International
• /
• v.22 no.7
• /
• pp.801-810
• /
• 2013

To improve the physical and chemical properties of the soil and increasing water-retaining property of the soil, Superabsorbent synthetic polymeric materials have been used. The experiment carried out from April to July 2012 after the influence evaluation of Superabsorbent synthetic polymeric materials to vines plant. The result shows that the study of Hedera japonica Tobler, the growth and the survival rates rank as media > hydroponic > superabsorbent synthetic polymers, and the growth and the survival rates are considerably pessimistic in the experiment of hydroponic and superabsorbent synthetic polymers. In the study of Trachelospermum asiaticum var. intermedium, the growth and the survival rates rank as hydroponic > media > superabsorbent synthetic polymers, the difference between the experiment of hydroponic and is very small and the survival rates are not very good in the experiment of superabsorbent synthetic polymers. In the study of Euonymus fortunei var. radicans Rehder,it is insignificantly difference among the different of planting based. Judging from these results, the differences are depending on the species of plants. The thesis holds that the characteristics of plant should be considered in plant cultivation and soil improvement in the future, and it is desirable to use the appropriate mixing ratio of soil in soil improvement as well.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.5
• /
• pp.11-24
• /
• 2011

A real-time hybrid test of a 3 story-3 bay reinforced concrete frame which is divided into numerical and physical substructure models under uniaxial earthquake excitation was run using a fixed iteration implicit HHT time integration method. The first story inner non-ductile column was selected as the physical substructure model, and uniaxial earthquake excitation was applied to the numerical model until the specimen failed due to severe damage. A finite-element analysis program, Mercury, was newly developed and optimized for a real-time hybrid test. The drift ratio based on the top horizontal displacement of the physical substructure model was compared with the result of a numerical simulation by OpenSees and the result of a shaking table test. The experiment in this paper is one of the most complex real-time hybrid tests, and the description of the hardware, algorithm and models is presented in detail. If there is an improvement in the numerical model, the evaluation of the tangent stiffness matrix of the physical substructure model in the finite element analysis program and better software to reduce the computational time of the element state determination for the force-based beam-column element, then the comparison with the results of the real-time hybrid test and the shaking table test deserves to make a recommendation. In addition, for the goal of a "Numerical simulation of the complex structures under dynamic loading", the real time hybrid test has enough merit as an alternative to dynamic experiments of large and complex structures.

• Journal of Preventive Medicine and Public Health
• /
• v.46 no.4
• /
• pp.165-172
• /
• 2013

A noncommunicable disease (NCD) is a medical condition or disease that is by definition non-infectious and non-transmissible among people. Currently, NCDs are the leading causes of death and disease burden worldwide. The four main types of NCDs, including cardiovascular disease, cancer, chronic lung disease, and diabetes, result in more than 30 million deaths annually. To reduce the burden of NCDs on global health, current public health actions stress the importance of preventing, detecting, and correcting modifiable risk factors; controlling major modifiable risk factors has been shown to effectively reduce NCD mortality. The World Health Organization's World Health Report 2002 identified tobacco use, alcohol consumption, overweight, physical inactivity, high blood pressure, and high cholesterol as the most important risk factors for NCDs. Accordingly, the present report set out to review the prevalence and trends of these modifiable risk factors in the Korean population. Over the past few decades, we observed significant risk factor modifications of improved blood pressure control and decreased smoking rate. However, hypertension and cigarette smoking remained the most contributable factors of NCDs in the Korean population. Moreover, other major modifiable risk factors show no improvement or even worsened. The current status and trends in major modifiable risk factors reinforce the importance of prevention, detection, and treatment of risk factors in reducing the burden of NCDs on individuals and society.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1632-1644
• /
• 2007

Wireless Mesh Networks aim to attain large connectivity with minimum performance degradation, as network size is increase. As such, scalability is one of the main characteristics of Wireless Mesh Networks that differentiates it from other wireless networks. This characteristic creates the need for bandwidth efficiency strategies to ensure that network performance does not degrade as the size of the network increase. Several researches have been done to realize mesh networks. However, the researches conducted were mostly focused on a per TCP/IP layer basis. Also, the studies on bandwidth efficiency and bandwidth improvement are usually dealt with as separate issues. This paper aims to simultaneously study bandwidth efficiency and improvement. Aside from optimizing the bandwidth given a fixed capacity, the capacity is also increased using results of physical layer studies. In this paper, the capacity is improved by using the concept of non-overlapping channels for wireless communication. A channel allocation scheme is conceptualized to choose the transmission channel that would optimize the network performance parameters with consideration of chosen Quality of Service (QoS) parameters. Network utility maximization is used to optimize the bandwidth after channel selection. Furthermore, a routing scheme is proposed using the results of the network utilization method and the channel allocation scheme to find the optimal path that would maximize the network gain.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.4
• /
• pp.39-48
• /
• 2012

Generally, rural housing in Korea have had target of people who are in good physical health rather than the disabled. Therefore, it is difficult to offer high quality residential environment for the elderly and the disabled. The purpose of this study is to present the remodeling of rural house for the disabled. this study divides the a rural house into 7 sectors : a passage to entrance, an entrance hall, a livingroom, a bedroom, a bathroom, a kitchen, and etc. this study propose the following renovation plan that rural housing to be barrier free space. First, in passage to entrance of the house, people with disabilities should not experience difficulties in walking, so installing ramps to remove the stepped slope grade without slip so that the floor finish should be. Second, install grab handle on the wall inside the housing so that the disabled can lean on the handle. Third, placing the furniture in the bedroom that wheelchair can be rotated, and make to lower the height of the switchs. Forth, install a non-slip floor tile to prevent accidents in the bathroom.

• Corrosion Science and Technology
• /
• v.12 no.5
• /
• pp.239-244
• /
• 2013

Marine equipment exposed to harsh environments requires not only excellent corrosion resistance but also improvement of physical characteristics against natural material degradation. With growing interests in ocean energy resources, the higher reliability for marine equipment has become more important in terms of material characteristics. ALBC3 alloy represents excellent corrosion resistance and is widely used in corrosive environments. However, cavitation damage occurs frequently due to its poor durability in high flow rate of marine environment. In this research, shot peening technology was employed as a surface modification with shot peening stand-off distance to mitigate cavitation damage. The effects of shot peening on extent of cavitation damage and weight loss were evaluated for both shot peened and non-peened specimens. The results revealed that the application of shot peeing decreased cavitation damage for all experimental conditions in comparison with the non-peened specimens. The optimum stand-off distance was determined to be 10 cm, since more than 35 % of cavitation damage reduction was observed.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.4
• /
• pp.592-602
• /
• 1995

Non-grid and grid method are used for modeling the routing region of the automatic routing system. In this study, we develop the automatic routing system by mixing the methods of non-grid and grid to improve the speed of routing. Grid method has a demerit which decreases the automatic routing speed because it is required a lot of memory by the limitation of the size of board and grid, although the electrical and physical elements are insufficient on the PCB, But non-grid is spent gurite less memory than grid method by using a shape-based patterns. Therefore, we used the methods of non-grid and grid altogether in this paper, In the former method, it is attributed to the improvement of speed, the latter one is applied only the connection of the failed routing in the former one, and it performs the complete automatic routing. This system was developed with C＋＋language under the Windows NT environment of IBM 486DX2-66 Computer.

• Journal of agricultural medicine and community health
• /
• v.25 no.2
• /
• pp.327-341
• /
• 2000

Objectives : This study is to evaluate the status of health promotion behaviors and life styles in rural areas. Methods : A self-administered questionnaire survey was carried out for 1,350(men 461 persons, women ; 889 persons) people in rural areas ages of 30 years and older in Buk-myun, Uljn-Gun and Kikye-myun, Pohang-City, Kyungsangbuk-Do from March 13 to 25 in 1999. We established health promoting scores by using data results. Collected data was analyzed through the chi-square trend test, Student's t-test, ANOVA and multiple comparison. The data was analyzed using a SPSS/win statistical package. Results The age-adjusted prevalence of individual health promoting behavior by sex was 39.4% in men and 94.0% in women in regard to non smoking 39.4% and 92.5% in non-drinking 17.2% and 13.1% in physical exercise on a regular basis 79.8% and 80.0% in a regular diet 81.6% and 75.6% in maintaining desirable body mass index 81.2% and 78.2% in sufficient physical rest 84.2% and 82.1% in sufficient mental rest 48.4% and 40.6% in supplemental intake for health. The age-adjusted proportion for a screening examination in stomach cancer by sex was 39.9% in men and 37.1% in women 31.8% and 28.0% in liver cancer 17.0% and 12.7% in colon cancer 37.0% and 31.0% in undergoing a medical health screening. The health promoting scores were statistically significant, higher in the younger aged women's group(p<0.01). In spite of very low health promoting scores, some men thought of themselves healthy. Conclusions : The health promoting scores showed a gradual improvement as ages in men increase. Although men in ages of 30 to 40 were found to have lower scores in their health promoting scores, they were still to believe that none of health status is problematic. However, it was shown a vice-versa effect in women. They thought of their health as in a bad condition, but in measurement scores outranked their personal beliefs. In general, as ages increase one tends to consider of his or her health status poor. Therefore the plans for health improvement are needed to be come up.