• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1163-1168
• /
• 2019

Hydrodynamic properties have been investigated for promising extraction systems: $0.05mol\;L^{-1}$ solutions of di(N-ethyl-4-ethylanilide) of 2,2'-bipyridine-6,6'-dicarboxylic acid, di(N-ethyl-4-fluoroanilide) of 2,6-pyridinedicarboxylic acid and di(N-ethyl-4-hexylanilide) of 2,2'-bipyridine-6,6'-dicarboxylic acid in meta-nitrobenzotrifluoride (F-3) or trifluoromethylphenyl sulfone (FS-13) diluents. To evaluate the perspectives for their use as extraction mixtures at the final stage of the nuclear fuel cycle, the change in density, viscosity, surface tension, and phase separation rate under irradiation with accelerated electrons was studied. The concentrations of extractants in the irradiated mixtures have been determined and the radiation-chemical yields have been calculated. Irradiation significantly decreases the phase separation rate at the stages of extraction and back extraction for all the studied systems. The viscosity of the DYP-7 solution in FS-13 increase above the values suitable for its use in extraction processes.

• Applied Biological Chemistry
• /
• 제40권1호
• /
• pp.48-52
• /
• 1997

다양한 가공 적성을 갖는 변성 전분을 토마토 케찹의 제조에 첨가하여 변성 전분의 종류 및 첨가량이 토마토 케찹의 유동 특성, 층분리 및 관능적 성질에 미치는 영향에 관하여 조사하였다. 케찹을 Herschel-Bulkley계 유체로 간주하여 분석한 결과 항복응력와 점조도지수는 ADA(acetylate distarch adipate)>SA(starch acetate)>HDP(hydroxypropyl distarch phosphate)>RCS(raw corn starch)>NS(no starch)의 순으로 크게 나타났으며 거동유동지수는 SA와 HDP의 경우 첨가량에 관계없이 거의 일정하였으나 ADA와 RCS는 첨가량이 증가할 수록 감소하는 경향을 보였다. 원심분리에 의한 층분리 검사에서는 ADA>SA>HDP>RCS>NS의 순으로 층분리가 방지되는 안정성을 나타냈다. 관능검사 결과 전반적으로 ADA(2%)>SA(2%)>RCS(2%)>NS>HDP(2%)의 순으로 기호도가 높게 나타났다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 추계 총회 및 학술발표회
• /
• pp.86-87
• /
• 1996

IPN (Interpenetrating Polymer Network) is a mixture of two or more crosslinked polymers with physically interlocked network structures between the component polymers. IPN can be classified as an alloy of thermosets and has the characteristics of thermosets such as the thermal resistance and chemical resistance and also has the characteristics of polymer alloys with enhanced impact resistance and amphoteric properties. The physical interlocking during the synthesis restricts the phase separation of the component polymer with chemical pinning process, thus the control of morphology is possible through variations of the reaction temperature and pressure, catalyst concentration and crosslinking agent concentration. Finely dispersed domain structure can be obtained through IPN synthesis of polymer components with gross immiscibility. In membrane applications, particularly for the separation of liquid mixtures, crosslinked polymer component with specific affinity to the permeate is needed. With the presence of the permeant-inert polymer component, the mechanical strength and the selectivity of the membranes are enhanced by restricting the swelling of the transporting polymer component networks.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.648-653
• /
• 2003

Optimized recovery of heavy minerals from the near shore sands of Korean Yellow Sea was investigated using physical processing technologies such as gravity concentration and magnetic separation. The head samples were subjected to the three stages effective separation; Head sample was first treated by a spiral separator to recover rough heavy mineral concentrates, which are contained minerals like ilmenite, zircon and rare earth minerals. Much higher beneficiation processes were subsequently taken by wilfley table and magnetic separation according to their magnetic field responses. Heavy minerals were effectively recovered by wilfley table and subsequent recleaning of heavy minerals by magnetic separations was conducted. Qualitative and relative-quantitative analyses of their constituent elements were doing using XRD and XRF.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.728-736
• /
• 1996

Solid/Liquid(S/L) separation is crucial for biological treatment of animal wastewater. Liquid portion from S/L separation has less BOD-load and proper post-strip treatment can be obtained . Screen or declined sieve was normally used to separate the solid parts. For better separating efficiency a vibration and a cylindrical separator were constructed and tested. The results are summarized as follows : Solids removal efficiency and moisture content of separated solid were 15-26% and 85-88%, respectively for the vibration separator. For the cylindrical separator, solid removal efficiency and moisture content of solid were 16-39% and 86-89% , respectively. The greatest amount of drymatter was obtained when operating vibration separator with 10。 inclination and 100% vibrating power. For the cylindrical separator maximum efficiency was obtained with 40rpm and 19 inclination . The vibration and the cylindrical separator have shown 21% and 26% in BOD removal, respectively. These two types of separator were proved to be applicable methods for animal wastewater separation.

• 한국항공운항학회지
• /
• 제29권3호
• /
• pp.34-43
• /
• 2021

Wake turbulence generated by the lead aircraft has a significant impact on the following aircraft and it is has been considered a key factor to consider whenin determining the longitudinal separation between the aircraft. ICAO classifies aircraft into four wake turbulence categories based on the maximum takeoff weight and provides the longitudinal separation minima for each category. Due to richer measured data and better understanding of physical processes, it is raised that classifying aircraft with only four wake turbulence grades is imprecise and leads to over-separation in many instances. In this regards, much research on a new method of classifying Wake Turbulence Category(Re-CAT) has been done by EURO-CONTROL, FAA, and ICAO. The main purpose of this study is to conduct a comparative analysis of the existing wake turbulence separation standards with Re-CAT in terms of departure capacity and the resulting benefits of Re-CAT using the data from the Incheon International Airport. The results show that EUROCONTROL and new ICAO standards have the greater effect on reducing wake turbulence separation, compared to the FAA RE-CAT standards. It is also concluded that Re-CAT presents different results of wake turbulence separation depending on the flight characteristics of each airport.

• The Journal of Korean Physical Therapy
• /
• 제21권3호
• /
• pp.1-8
• /
• 2009

Purpose: The purpose of this study was to examine the functional category, the item structure and the model-data fit of the neck disability index (NDI) of neck pain subjects by performing a Rasch rating scale analysis. Methods: The data was obtained from the assessments of 71 college students (males: 27, females: 44) with neck pain. The data of the NDI was applied to the Rasch's rating scale model to estimate the difficulty of items, the goodness-of-fit of each item, the separation reliability and index, and the rating scale. Results: The 'sleep' item showed misfit and nine items were founds to be fits for self-reporting of disability due to neck pain. The most difficult item of the remaining 9 items was 'work' and the easiest item was 'headache'. The transformation formula score=(logit score+7.10)/(7.10+0.11)$\times$100. The 6 response levels of the NDI were validated according to the structure of the rating scale. The item and subject reliability of the separation reliability was 0.97 and 0.85, respectively. Conclusion: We proved that the NDI for self-reporting of disability of daily activities due to mild neck pain was valid and reliable. This study suggests that individuals with mild neck pain may be assessed by using the modified NDI that does not include the 'sleep' item in the 10 items of NDI.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.281-281
• /
• 1996

The immunoassay method is frequently used for the identification and quantitation of ultratrace amount of bioactive substances. Homogeneous liposome immunoassays, which can avoid the use of radioisotopes and separation steps, have recently been reported in many publications. Cytolysin-mediated liposome immunoassay using melittin ever been studied but showed limited applications. Here, we designed a homogeneous liposome immunoassay using Clostridium perfringens phospholipase C (PLC), an enzyme which catalyzes the hydrolysis of phosphatidylcholine in biological membranes, as a cytolysin.

• 청정기술
• /
• 제18권4호
• /
• pp.341-346
• /
• 2012

연구자들은 용수 및 폐수 내에 함유되어 있는 중금속을 효과적으로 제거하기 위한 많은 공정을 연구하고 있다. 많은 공정들 중에서 특히, 물리, 화학적 공정은 생물학적 공정과 비교해볼 때 대체로 간단하고 높은 중금속 제거효율을 얻을 수 있다. 최근에는 방사능원소에 대한 위험성 때문에 물리, 화학적 방법들에 대한 관심이 다시 급격하게 증가하고 있다. 이 연구에서는 화학적 침전, 이온 교환, 전기투석, 그리고 막 분리 등과 같은 다양한 물리, 화학적 공정들을 소개하고자 한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.218-219
• /
• 2008

A gas-liquid centrifugal separator is widely used in industry because of its simple geometry and little maintenance. Also, these separators have considerable advantages over filters, scrubbers or precipitators in term of compact design, low pressure drop and higher capacity. A gas-liquid centrifugal separator is a device that utilizes centrifugal force and low pressure to separate liquid from gas by density difference. Design parameters such as length of separation space, swirl vane exit angle, inlet to outlet pipe diameter ratio, models for separation efficiency and low pressure drop as a function of physical dimension are not available in literature. In present study, length of separation space (from vane to gas exit opening) has been studied using CFD. The 3-D Navier-Stokes equations are numerically solved using a fully implicit finite volume scheme. Based upon the obtained solutions, tangential velocities, centrifugal forces, vortices and total pressure losses are analyzed to find the best design parameters.