• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.75-82
• /
• 2019

Few studies have been conducted regarding theoretical turning force modelling while considering cutting constant. In this paper, a new cutting force modelling technique was suggested which considers the specific cutting force coefficients for turning. The specific cutting force is the multiplication of the cutting force coefficient and uncut chip thickness. This parameter was used for experimental modelling and prediction of theoretical cutting force. These coefficients, which can be obtained by fitting measured average forces in several conditions, were used for the formulation of three theoretical cutting forces for turning. The cutting force mechanism was verified in this research and its results were compared with each of the experimental and theoretical forces. The deviation of force was incurred by a small amount in this model and the predicted force considering feed rate, nose radius, and radial depth shows a physical behavior in main force, normal force, and feeding force, respectively. Therefore, this modelling technique can be used to effectively predict three turning forces with different tool geometries considering cutting force coefficients.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.149-155
• /
• 1995

This study is to investigate the dynamic pressure caused by breaking waves on a recurved offshore structure. A physical modelling was performed in a two-dimensional wave flume. The measuments from the physical modelling were compared with several known equations. The shock and secondary pressures were found to be dependent on water depth, breaking wave height and the size of the air pocket. The maximum pressure was recorded near the still water level and the secondary pressures near the recurved the recurved structure were found to be less than those experienced in a vertical offshore structure.

• Asian Journal of Innovation and Policy
• /
• 제6권3호
• /
• pp.262-273
• /
• 2017

Recently, the attention to the $4^{th}$ Industrial Revolution has been increasing. In the $4^{th}$ Industrial Revolution era, the boundaries between physical space, digital space, and biological space are becoming blurred because of the active convergence between various fields. There are many issues about the $4^{th}$ Industrial Revolution such as artificial intelligence, Internet of things, big data, and cyber physical system. To cope with the $4^{th}$ Industrial Revolution, an accurate analysis and technology planning need to be undertaken from a broad point of view. However, there is little research on the analysis of the major issues about the 4th Industrial Revolution. Accordingly, this study aims to analyse these major issues. Data mining such as topic modelling method is used for this analysis. This study is expected to be helpful for the researcher and policy maker of the 4th Industrial Revolution.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.129-130
• /
• 2005

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.95-102
• /
• 2003

Corestone rock mass has complex characters because it is made up of stronger and stiffer corestone in a weaker and softer matrix. Physical model corestone rock mass made up of stiffer corestone in weaker matrix were tested in uniaxial compression and numercal modelling analysis The result of the uniaxial compression tests showed that increasing the corestone proportion generally increased the modulus of deformation. And the strength decreased in the lower corestone proportion, but it increased in the higher proportion(45%, 65% corestone by volume). The strength and the modulus of deformation were not affected by different size coretone on the same proportion. The result of the numerical modelling analysis showed similar trend compared with the result of the result of the uniaxial compression test. But though the result of th uniaxial compression test is similar to the result of the numerical modelling analysis, it's unreasonalble to apply the results of this paper to in situ corestone rock mass. So mere laboratory tests including triaxial test and the other numerical program analyses are necessary to apply the results to in situ corestone mass

• Earthquakes and Structures
• /
• 제14권6호
• /
• pp.551-565
• /
• 2018

Experimental testing is considered the most realistic approach to obtain a detailed representation of the nonlinear behaviour of masonry-infilled reinforced concrete (RC) structures. Among other applications, these tests can be used to calibrate the properties of numerical models such as simplified macro-models (e.g., strut-type models) representing the masonry infill behaviour. Since the significant cost of experimental tests limits their widespread use, alternative approaches need to be established to obtain adequate data to validate the referred simplified models. The proposed paper introduces a detailed finite element modelling strategy that can be used as an alternative to experimental tests to represent the behaviour of masonry-infilled RC frames under earthquake loading. Several examples of RC infilled frames with different infill configurations and properties subjected to cyclic loading are analysed using the proposed modelling approach. The comparison between numerical and experimental results shows that the numerical models capture the overall nonlinear behaviour of the physical specimens with adequate accuracy, predicting their monotonic stiffness, strength and several failure mechanisms.

• 한국전문물리치료학회지
• /
• 제9권2호
• /
• pp.19-32
• /
• 2002

The purpose of this paper is to provide the reader with a pertinent information and research trends of biomechanics in wheelchair propulsion. Biomechanical studies for wheelchair propulsion mainly focus on the most suitable propulsion performance and methods for preventing upper extremity injuries. Recent issues have concentrated on wheelchair propulsion style and cycle mainly because of the high prevalence of repetitive strain injuries in the upper extremely such as shoulder impingement and carpel tunnel syndrome. Optimizing wheelchair propulsion performances as well as medical reflections are presented throughout the review. Information on the underlying musculoskeletal mechanisms of wheelchair propulsion has been introduced through a combination of data collection under experimental conditions and a more fundamental mathematical modelling approach. Through a synchronized analysis of the movement pattern and muscular activity pattern, insight has been gained in the wheelchair propulsion dynamics of people with a different level of disability (various level of physical activity and functional potential). Through mathematical modelling simulation, and optimization (minimizing injury and maximizing performance), underlying musculoskeletal mechanisms during Wheelchair propulsion is investigated.

• 환경영향평가
• /
• 제21권5호
• /
• pp.631-648
• /
• 2012

The integrative ecological approaches of chemical assessments, physical habitat modelling, and multi-metric biological health modelling were applied to Gwanpyeong Stream within Gap-Stream watersheds to evaluate environmental impacts on the constructions of residential and commercial complex. For the analysis, the surveys conducted from 45 sites of reference streams within the Gap-Stream watershed and 3 regular sites during 2009 - 2010. Physical habitat health, based on the habitat model of Qualitative Habitat Evaluation Index(QHEI) declined from the headwaters(good - fair condition) to the downstream(poor condition). Chemical water quality, based turbidity and electric conductivity(EC), was degraded toward to the downstream, and especially showed abrupt increases, compared to the values of control streams(CS). Also, concentrations of chlorophyll-a in the downstreams were greater compared to the control stream(CS), indicating an eutrophication. Biological health conditions, based on the Index of Biological Integrity(IBI) using fish assemblages, averaged 19.3 which is judged as a fair condition by the biological criteria of the Ministry of Environment, Korea. The comparisons of model metric values in sensitive species and riffle-benthic species on the Maximum Species Richness Line(MSRL) of 45 reference streams indicated a massive disturbances in all sampling locations. Also, tolerance guild and trophic guild analyses suggest that dominances of tolerant species and omnivores were evident, indicating a biological degradation by habitat disturbances and organic matter pollutions. There was no distinct longitudinal variations of IBI model values from the headwater to the downstream in spite of slight chemical and habitat health gradients among the sampling sites. Overall, integrative ecological health(IEH) scores, based on the chemical, physical, and biological parameters, were low compared to the 45 reference streams due to physical and chemical disturbances of massive constructions of the residential and commercial complex. This stream, thus showed a tendency of typical urban streams which are disturbed in the chemical water quality, habitat structures, and biological integrity. Effective stream management plans and restoration strategies are required in this urban stream for improving integrative stream health.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.131-133
• /
• 2005

• 한국컴퓨터정보학회논문지
• /
• 제28권5호
• /
• pp.57-66
• /
• 2023

본 논문에서는 Enterprise 네트워크 이외 환경에서의 공격 그래프 연구 중 최근 5년간 가장 많이 연구된 사이버-물리 시스템(CPS) 환경에 대한 공격 그래프 연구 동향을 살펴보고, 기존 연구의 한계와 앞으로 나아갈 방향을 분석한다. 최근 5년간 발표된 공격 그래프 논문 150여 편 중 35편이 CPS 환경을 대상으로 하고 있으며, 본 논문에서는 CPS 환경의 보안 측면 특징을 살펴보고, 대상 연구들을 이러한 특징들에 따라 물리 시스템 모델링 여부와 네트워크 단절 구간에 대한 고려 여부의 두 가지 관점으로 분류 및 분석한다. 본 논문에서 소개한 20편의 논문 중 절반이 CPS 환경의 특징을 제대로 반영하지 못하며, 나머지 절반의 연구가 물리 시스템 모델링과 네트워크 단절 구간 중 하나씩을 다루고 있다. 본 논문에서는 이러한 상황을 바탕으로 CPS 환경에서의 공격 그래프 연구가 직면한 어려움을 진단하고 이에 따라 앞으로의 CPS 환경 공격 그래프 연구는 국가주도 연구, 공개된 상용 시스템을 대상으로 한 연구가 주를 이룰 것으로 분석한다.