• 펄프종이기술
• /
• 제39권2호
• /
• pp.38-44
• /
• 2007

The hygroscopic property of paper is important for convertability and end use performance. When the board and corrugated fiberboard are exposed to low relative humidity, a trouble of score (or crease) cracking could occur. In this study, we evaluated the moisture content and mechanical properties of linerboard and corrugated board at the cyclic condition of low humidity to prevent a score crack trouble. As the relative humidity decreased from 50% to 38% and 25%, the moisture content of linerboard decreased about 7% to 6% and 4%. At low humidity, most of mechanical properties were improved except for strain. The linerboard exposed at 25% RH showed a remarkable reduction of strain by 11%. At the same relative humidity, linerboard and corrugated fiberboard showed the different property values depending on moisture hysteresis.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.646-652
• /
• 2006

Several oxynitride glasses were fabricated by means of adding $Si_3N_4$ powders as nitrogen source to Ca-Al-Si-O-N (CAS) and Mg-Al-Si-O-N (MAS) glass powders, and heat-treated in graphite crucible at 1600$^{\circ}C$ for 1 h. The physical and mechanical properties as well as impact resistance were generally increased and compared with each other. The impact resistance properties of those manufactured glasses were evaluated by DOP (depth of penetration) method which is a way to analyze armor materials. There were two means to be used herein; the copper jet impacted at hyper velocity by exploding K2l5 warhead and tungsten heavy alloy (WHA) impact bar at high velocity by firing in 30 mm solid propellent gun. The impact resistance properties against copper jet were increased and then decreased with increasing nitrogen content, while those against WHA bar were not changed apparently with nitrogen content.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.97-98
• /
• 2012

This research examined the fundamental property of the MgO as the fundamental study that substituted the MgO in the low melting point modified sulfur mortar to examine the physical properties.In this research, the table floor, flexural strength test, and compressive strength test were performed. And as the replacement ratio increased, the floor showed the tendency to increase. And when being the replacement ratio 3%, the flexural strength and compressive strength made the high strength. In case of being substituted for over 5% they displayed the tendency that the intensity is degraded.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.113-118
• /
• 2003

Stress and displacement fields for a propagating crack in a functionally gradient material (FGM) which has exponentially varying elastic and physical properties along the direction of the crack propagation, are derived. The equations of motion in nonhomogeneous material are developed using displacement potentials. The solutions to the displacement fields and the stress fields for a crack propagating at constant speed along the gradient are obtained through an asymptotic analysis. The influences of nonhomogeneity on the higher order terms of the stress fields are explicitly brought out. Using these stress components, isochromatic fringes around the stationary crack are generated at crack for different nonhomogeneity and the effects of nohonhomgeneity on these fringes are discussed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.270-274
• /
• 2004

Aircraft composite structure with honeycomb core experiences core crush problem in manufacturing. To prevent core crush additional processes are needed such as core stabilization and prepreg material tie-down and this is the cause of increasing cost. Recent study shows that high friction prepreg prevent core crush without additional process. This paper presents the analysis of high frictional material which attracts lots of interests through physical property, mechanical property and microscopic morphology and the cause of friction.

• 한국기계연구소 소보
• /
• 통권20호
• /
• pp.41-48
• /
• 1990

Electro-pneumatic valves are an electro-mechanical device which convert electric signal into pneumatic flow rate or pressure signal. Recently, the development tendency of electro-pneumatic valve is to make the valve with more compact and less electric power consumption style. To make the valve such as a style, the role of solenoid part is very important. This paper is used in the finite-element method for the purpose of evaluating the magnetic property of solenoid and analyze flux distribution of solenoid theoretically. From flux contour line which is obtained by numerical analysis, it verified that the plunger shape and physical property of solenoid part have influence on saturation phenomenon and leakage of magnetic fluxs. This paper made an experiment on the measurement of dynamic response time and force in order to confirm the propety of analytic result, and confirmed a good agreement between analysis results and experiment results.

• 한국자기학회지
• /
• 제16권4호
• /
• pp.211-215
• /
• 2006

구조 강이나 터빈로터 강의 기계적 물성은 자기적 특성과 관계되므로, 비파괴적으로 자기적 특성을 측정하여 기계적 물성을 평가하는 연구가 많이 수행되었다. 따라서 자동차용 강판으로 사용되는 냉연강판에서도 비파괴적으로 자기적 특성을 측정함으로써 냉연강판의 기계적 물성을 유추할 수 있을 것이고, 냉연강판 생산 라인에서 자기적 특성을 측정하여 온라인상에서 냉연강판의 기계적 특성을 모니터할 수 있을 것이다. 기계적 특성이 다른 세 종류의 냉연강판 CBQ 3060, CBQ 3041 및 CBQ 3036의 시편을 준비하고 교류 섭동 자기장을 인가하여 자기적 특성인 가역투자율을 비파괴적으로 측정함으로서 기계적 물성인 경도와의 상관관계를 규명하였다. 세 종류의 냉연강판 시편에서 기계적 물성인 비커스 경도, 항복강도 및 인장강도를 측정하였다. 주파수가20 Hz일 때, surface type 프로브로 측정한 섭동자기장의 제 1차 고조파인 가역투자율의 피크 간 간격에서 구한 보자력은 비커스경도, 항복강도 및 인장강도가 증가할 때 선형적으로 증가하였다. 주파수 20 Hz에서 lift-off에 대한 가역투자율 측정을 하였는데,lift-off가 증가함에 따라 고조파의 amplitude가 급격히 감소하였다.

• 지질공학
• /
• 제26권4호
• /
• pp.593-600
• /
• 2016

본 연구에서는 국내의 107개 터널 설계 과정에서 수행한 현장 및 실내시험 자료 4,280개를 이용하여 암반 및 무결암의 역학적 특성을 암종 및 강도별로 분석하였다. 분석된 물리 및 역학적 특성은 단위중량, 점착력, 내부마찰각, 변형계수, 탄성계수, 포아송비, 일축압축강도, 인장강도, 투수계수, 비중이다. 평균값의 분석 결과에 의하면 편마암은 비중, 화강암은 투수계수, 퇴적암은 단위중량과 점착력, 내부마찰각, 화산암은 변형계수와 탄성계수, 일축압축강도, 인장강도, 변성암은 포아송비에서 가장 높은 값을 보인다. 역학적 특성의 분포 범위는 암종 및 강도를 고려한 분석에도 불구하고 넓게 분포하며, 이는 암반의 불균질성과 이방성에 기인하는 것으로 판단된다.

• Smart Structures and Systems
• /
• 제26권3호
• /
• pp.331-343
• /
• 2020

In this paper, based on the CPT, motion equations for a sandwich plate containing a core and two integrated face-sheets have derived. The structure rests on the Visco-Pasternak foundation, which includes normal and shear modules. The piezo-magnetic core is made of CoFe₂O₄ and also is subjected to 3D magnetic potential. Two face sheets at top and bottom of the core are under electrical fields. Also, in order to obtain more accuracy, the effect of flexoelectricity has took into account at face sheets' relations in this work. Flexoelectricity is a property of all insulators whereby they polarize when subject to an inhomogeneous deformation. This property plays a crucial role in small-scale rather than macro scale. Employing CPT, Hamilton's principle, flexoelectricity considerations, the governing equations are derived and then solved analytically. By present work a detailed numerical study is obtained based on Piezoelectricity, Flexoelectricity and modified couple stress theories to indicate the significant effect of length scale parameter, shear correction factor, aspect and thickness ratios and boundary conditions on natural frequency of sandwich plates. Also, the figures show that there is an excellent agreement between present study and previous researches. These finding can be used for automotive industries, aircrafts, marine vessels and building industries.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권6호
• /
• pp.491-497
• /
• 2001

Polymethylmethacrylate(PMMA) is currently commonly used material for the reconstruction of bone defects and fixation of joint prosthetics following congenital and acquired causes. Although PMMA has widespread use, it does not possess the ideal mechanical characteristics with osteoconductivity and osteoinductivity required. In order to overcome these problem, addition of bovine bone drived defatting demineralized bone(BDB) powders to a PMMA bone cement was done for improvement of physical property and bone forming characteristics of composite. In order to investigate the influence of BDB reinforcement on the PMMA, we measured physical property of compressive, tensile, flexural strength, and scanning electron microscopic examinations. The results were obtained as follows: 1. The PMMA forms a solid cellular matrix with open cells about $100{\mu}m$ in variable size and incorporating BDB. BDB aggregates inside the cells form a porous network that is accessible from the outer surface. 2. The physical properties were compressive strength of mean $22.74{\pm}1.69MPa$, tensile strength of mean $22.74{\pm}1.69MPa$, flexural strength of mean $77.53{\pm}6.93MPa$. Scanning electron microscopic examinations were revealed that there was DBD particles form a highly porous agglomerates. BDB can be added PMMA in the form of dried powders, the composites are applicable as bone substitutes. BDB and PMMA mixture is shown to produce a class of composites that due to their microstructure and improved mechanical properties may be suitable for application as bone subsitutes. The mechanical and material properties of the BDB-PMMA bone substitute composites are competitive with those properties of a porous ceramic matrix of other hydroxyapatite and with those of natural bones.