• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.979-986
• /
• 2001

This paper was researched the effect of slurry stability on the mechanical and electrical property of the porcelain insulator with various raw materials such as feldspar, quartz, clay and l7wt% alumina. The slurry was fabricated after ball milling the mixed raw materials. Green compacts were made by the extrusion and were sintered at 1300$\^{C}$ for 60min in the tunnel kiln. All of the specimens were densified 96% of the theoretical density. The 3-point flexural strength($\sigma$$\_$B/) of the specimen stabilized slurry pH 7.8 was 1650 k9/㎠ and the vickers hardness(Hv) and the fracture toughness(K$\_$IC/) were 27.5 GPa and 2.2 MPa$.$m$\^$$\sfrac{1}{2}$/, respectively. The mechanical properties of the specimen stabilized slurry PH 9.3 were 1716 kg/㎠($\sigma$$\_$B/), 27.6 GPa(Hv) and 3.0 MPa$.$m$\^$$\sfrac{1}{2}$/(K$\_$IC/), respectively. The dielectric strength was increased from 8.3kV/mm to 13.2kV/mm as the increase of the slurry pH from 7.8 to 9.3. Therefore the physical properties of the specimen stabilized slurry pH 9.3 were improved.

• 펄프종이기술
• /
• 제29권4호
• /
• pp.53-63
• /
• 1997

Most cellulose resources come from the higher plants, but bacteria also synthesize same cellulose as in plants. Many scientists have been widely studied on the bacterial cellulose, the process development, manufacturing, even marketing of cellulose fibers. The bacterial celluloses are very different in its physical and morphological structures. These fibers have many unique properties that are potentially and commercially beneficial. The fine fibers can produce a smooth paper with enchanced its strength property. But there gave been few reports on the mechanical properties of the processing of bacterial cellulose into structural materials. This study were performed to elucidate the mechanical properties of sheets prepared from bacterial cellulose. Also reinforcing effect of bacterial cellulose on the conventional pulp paper as well as surface structures by scanning electron microscopy were discussed. Paper made from bacterial cellulose is 10 times much stronger than ordinary chemical pulp sheet, and the mixing of bacterial cellulose has a remarkable reinforcing effect on the papers. Mechanical strengthes were increased with the increase of bacterial cellulose content in the sheet. This strength increase corresponds to the increasing water retention value and sheet density with the increase of bacterial cellulose content. Scanning electron micrographs were shown that fine microfibrills of bacterial celluloses covered on the surfaces of hardwood pulp fibers, and enhanced sheet strength by its intimate fiber bonding.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.362-372
• /
• 2010

This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and then followed by thermal treatment for enhancing MWNT dispersion with polyurethane. This modified MWNT was mixed with polyurethane by changing the loading content of MWNT and dispersion time under the dimethylformamide solution in the ultrasonic wave apparatus. Various physical characteristics of the modified PU/MWNT films were measured and analyzed in terms of the loading content and dispersion time. The maximum absorbance of the PU/MWNT films were observed with the 2wt% loading at dispersion times of 2 and 24 hour, respectively. The minimum electrical volume resistivity of PU/MWNT film was shown at the loading content of 0.5wt% or more irrespective of dispersion treating time. However the optimum condition was assumed to 2wt% loading at dispersion time of 2 hours by assessing the surface profile of the film using video microscope. The breaking stress and strain of the PU/MWNT film decreased with increasing loading content, but no change of physical properties was shown with increasing in dispersion time.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.509-512
• /
• 2006

We have many environmental problems by the polluted materials as a results of mechanical development these days. So people want to use building products made from natural things and take a good effect for people from those bio products. We can instance electron wave shelding, far infrared ray and anion emission, and anti-bacterial property as the latest trend of the bio building material. So we had a experiment to investigate how much bio materials affect concrete when we use in the concrete with cement substitution. We tested slump, 7days compressive strength, and air contents for physical properties of bio concrete. The result is that bio concretes with four bio ingredients have proper values comparing with target values for slump and air content but lower compressive strength than plain concrete.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1601-1606
• /
• 2007

In order for high strength aluminum alloys to be used in transportation systems and the aerospace industry, excellent mechanical and physical properties are required. In particular, excellent anti-abrasion property is indispensable for parts that require driving force. In general, surface treatment technologies such as high frequency heat treatment, gas solid carburizing, surface rolling, shot peening are used as ways of improving anti-abrasion property. Among various surface treatment technologies, this research chose shot peening processing for Al7075-T6, which is well known as representative high-strength alloy steel. Wear characteristics were compared and analyzed after shot peening processing with shot ball velocities of 40m/s and 70m/s in order to investigate the effects of shot peening processing on wear characteristics.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1166-1173
• /
• 2004

In this paper, in order to apply magnetic fluid with superparamagnetic property as the substitute of ferromagnetic materials, physical properties of magnetic fluid are investigated. A targeted drug delivery system using a capsule filled magnetic fluid is proposed where a magnetic fluid capsule and cylinders are considered as a drug and vital organs, respectively. The dynamic governing equation of this system first is derived. Fluid viscosity, clearance between a cylinder and a magnetic fluid capsule, and levitation height with respect to different cylinder height are considered as major parameters to evaluate dynamic characteristics of the system. The experiments and simulations for the position control of the magnetic fluid capsule in various cylinders are conducted using PID controller. The results show that magnetic fluid with the superparamagnetic property can be applied to a targeted drug delivery system.

• 정보저장시스템학회논문집
• /
• 제10권1호
• /
• pp.19-22
• /
• 2014

Optical nonlinear property is utilized to the wave generation, generating the beam at intended wavelength, and optical computing systems. The genetic material, which is the DNA with helical structure in nano-scale, is fascinating for optics communities due to artificially controllable sequence that determines the physical and chemical property. Nonlinearity of DNA was investigated by the four wave mixing experiment, which is with two incident beams located at 1550nm and 1650nm. The four output beams including incident beams are emitted from genetic material such as 1461nm and 1763nm by nonlinear characteristic. The 1461nm beam which is generated by four wave mixing phenomena was observed by optical spectrum analyzer.

• Elastomers and Composites
• /
• 제44권2호
• /
• pp.134-142
• /
• 2009

양기능성실란(TESPD)이 실리카가 함유된 NR복합소재에 첨가되었을시 그에따른 가교특성, 가공정도, 물리적 특성들에 미치는 영향을 조사하였다. TESPD를 첨가한 NR복합소재는 TESPD가 실리카표면과 고무의표면을 화학적으로 결합하여 3차원적인 구조를 형성함으로해서 가교도가 증가하였고, 이에따라 기계적강도가 증가하였다. 이 복합소재는 또한 TESPD를 첨가하지않은 소재와 비교했을시 가공성이 증가하는것을 보여주었다.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.252-259
• /
• 2009

양기능성실란(TESPD)이 실리카가 함유된 SBR 복합 소재에 첨가되었을 시 그에 따른 가교특성, 가공정도, 물리적 특성들에 미치는 영향을 조사하였다. TESPD를 첨가한 SBR 복합 소재는 TESPD가 실리카와 고무를 화학적으로 결합하여 3차원적인 구조를 형성함으로해서 가교밀도가 증가하였고, 이에 따라 기계적 강도가 증가하였다. 이는 또한 TESPD를 첨가하지 않은 소재와 비교했을 시 가공성이 증가하였다.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.231-238
• /
• 2017

There are many kinds of elements and processes for the development of high quality bedding products like fiber, high-temperature heat treatment, dyeing process, tenter drying with softening agent and multiple final finishing. Especially we examined the mechanical characteristic properties of fabrics according to different yarn types. The critical physical properties of the yarn consisting the pile knitted fabrics were obtained for the development of the hi-grade bedding items. The material property and the exhaustion behaviour of the developed pile knitted fabrics composing of different yarns were measured and observed. The physical properties of the developed fabric were evaluated through the material property analysis of the yarn, the physical nature of the pile knitted fabrics and the data of the exhaustion performance; tensile strength, tensile elongation, tearing strength, cross section of yarn types, dyeing properties etc. And then high-class of bedding items were knitted using the double raschel machine to make the pile knitted fabrics.