• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.51-60
• /
• 2006

At new constructing national road, a cutting slope was surveyed and gotten face mapping for three months. The slope is composed of gray phyllite and coaly slate which is the Chang-ri Formation, Okcheon system. The slope angle is 40 degree and the direction is NNE. The attitude of schistosity is $260^{\circ}/45^{\circ}$. So the slope direction is nearly parallel to the schistosity. This is the reason that the slope is very unstable. On the other hand, the very unstable slope is caused by the direction of the schistosity and the slope. First month the coaly slate was slided through the schistosity plane about 10cm. However, three months late the displacement was 2m maximum.

• Economic and Environmental Geology
• /
• v.10 no.4
• /
• pp.177-184
• /
• 1977

This study is focused on the geological structure of Igog-Jangam folded zone in the vicinity of Goesan town where Ogcheon group distributes. The geology is composed of Gyemyungsan formation, Daehyangsan quartzite, Munjuri formation and Hwanggangri formation of Ogcheon group unknown age in descending order, and porphyritic biotite granite and dyke rocks that intruded into the Ogcheon group. The study revealed that Igog-Jangam folded zone is a plunged synclinal fold based on the following evidences; 1) Some pebbles in Hwanggangri formation at Minaemi-gol (a name of village) consists of phyllite of Munjuri formation. 2) The pebble bearing phyllitic bed in this area, Hwanggangri formation was recognized as the uppermost member in Ogcheon group instead of the basal one of the group. 3) A crest of anticlinal fold has been appeared near the Goegang bridge as a structural counter-part of that of the present area. 4) The study of lineation of minor fold in Munjuri formation also suggests that Igog-Jangam folded zone manifests to be a synclinal structure.

• Geomechanics and Engineering
• /
• v.17 no.6
• /
• pp.527-534
• /
• 2019

There have been developed a number of methods to assess the abrasivity of rock materials with the increased use of mechanized rock excavation. These methods range from determination of abrasive and hard mineral content using petrographic thin section analysis to weight loss or development of wear flat on a specified cutting tool. The Cerchar abrasivity index (CAI) test has been widely accepted for the assessment of rock abrasiveness. This test has been considered to provide a reliable indication of rock abrasiveness for isotropic rocks. However, a great amount of rocks in nature are anisotropic. Hence, viability assessment of Cerchar abrasivity test for the anisotropic rocks is investigated in this research. The relationship between CAI value and quartz content for the isotropic rocks is well known in literature. However, a correlation between EQ, F-Schimazek value, Rock Abrasivity Index (RAI) and CAI of anisotropic rocks such as phyllite was done first time in literature with this research. The results obtained with this research show F-Schimazek values and RAI values should be considered when determination of the abrasivity of anisotropic rocks instead of just using Cerchar scratch test.

• Economic and Environmental Geology
• /
• v.50 no.5
• /
• pp.353-361
• /
• 2017

Uranium concentration in groundwater of the Goesan area was anticipated high because the area contains Ogcheon metamorphic rock zone which partly includes coal bed bearing high uranium content and nearly half of the area is covered by granitic rocks. Groundwater samples collected from 250 wells in five 5 lithology (Ogcheon meta-sandy rock zone (Og1), Ogcheon lower phyllite zone (Og2), Ogcheon pebble bearing phyllite zone (Og3), Jurassic granite (Jgr), Cretaceous granite (Kgr)), of the area were analyzed and equivalent uranium concentrations (e(U)) from 200 rocks near sampled wells were measured using portable gamma spectrometry. Higher median value of e(U) (8.2 mg/kg) was found on Kgr outcrops. The median e(U) value of Og2 was not as high as that of Kgr and similar to those of Jgr, Og1, and Og3 (3.05~3.90 mg/kg). The uranium level in groundwater of the area ranged from 0.01 to $293.0{\mu}g/L$ with a median value of $0.87{\mu}g/L$ which is similar to the national median uranium level of $0.74{\mu}g/L$. The uranium concentration was high in the samples from the Kgr (median $4.74{\mu}g/L$) and low samples from the Og1, Og2, and Og3 (median $0.35{\sim}0.74{\mu}g/L$). The percentage of total samples having uranium level above $30{\mu}g/L$ was 2.8%, on the other hand, that of Kgr is 20.7%, reflecting additional survey on the Kgr area is needed.

• The Journal of Engineering Geology
• /
• v.26 no.4
• /
• pp.571-581
• /
• 2016

To understand the mechanical properties of fault rocks, data from 584 in situ and laboratory tests on fault rocks from 33 tunnels were analyzed. The unit weights of the fault rocks range from 17.3 to $28.2kN/m^3$ and the cohesion and friction angles vary from 5 to 260 kPa and $14.7^{\circ}$ to $44.0^{\circ}$, respectively. The modulus of deformation and elasticity were generally < 200 MPa. In most cases, the uniaxial compressive strength was < 0.5 MPa, and Poisson's ratios were mainly 0.20-0.35. The mechanical properties of individual rock types were analyzed using box plots, revealing that the cohesion values and friction angles of shale and phyllite have relatively wide inter-quartile ranges and that the modulus of deformation and elasticity of shale have the lowest values of all rock types. In the analysis of mechanical properties by components of fault rocks, the largest values were shown in damage zones of individual rock types.

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.271-277
• /
• 2007

To find out the anomalous zone in cut slope composed of phyllite and shist, we performed resistivity tomography using a pole-dipole way. The electrical distribution that propagates from a current source in lower part of slope is measured by a potential electrode in upper part of slope. Apparent resistivity data are inverted with an iterative regularized inversion method to reconstruct 3D resistivity image. By comparing with the resistivity images in relation to each section, the images of anomalous zone correspond to their positions represented in cut slope. Therefore, the application of resistivity tomography in cut slope is useful to recognize the extension of anomalous zone.

• The Journal of Engineering Geology
• /
• v.15 no.4 s.42
• /
• pp.463-473
• /
• 2005

Because of using the same rating ranges for every rock types the RMR or the Q-system could not usually consider local geological characteristics They also could not present sufficiently the engineering anisotropy of rocks. The canonical correlation analysis was carried out with 3 kinds of face mapping data obtained from granite, sedimentary rock and phyllite in order to clarify a discrepancy between rock types. According to analysis results, as a type of rocks changes, RM factors have different influences on the total rating of RMR.

• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.415-424
• /
• 1998

In order to investigate soil-gas $^{222}Rn$ concentrations, Kwanak Campus (Seoul National University), Boeun (Choong-buk) and Gapyung (Kyonggi) areas were selected and classified depending on their base rock types. Radon risk indices of these study areas decrease in the order of Gapyung>Kwanak Campus>Boeun areas, and in the order of rock type as banded gneiss>granite gneiss>granite>black slate-shale>mica schist>shale-lirnestone>phyllite-schist. Radon emanating trends with water content and grain size of soils were assessed by modified Morse 3 min. method. Radon emanation increases with the increase of water content in soils which is lower than 6~16 wt.%, and decreases in the range of higher than 6-16 wt. %. It shows that Rn emanation increases with the decrease of soil grain size. Radioactivity analysis of radionuclides of 238U series in some soil samples shows that radioactive disequilibrium state between $^{226}Ra$ and $^{238}U$ exists owing to different geochemical behavior of each radionuclide, and, it is necessary to carry out radioactive isotope geochemical approach for soil-gas $^{222}Rn$ study.

• Economic and Environmental Geology
• /
• v.36 no.2
• /
• pp.103-109
• /
• 2003

The mineralogy of material left after evaporation of acid mine drainage water is generally dependent on the chemical composition of the source water. The residues formed by the evaporation of acid mine water in the Dong-hae coal mine area consists mainly of gypsum (CaSO$_4${\circ}$2$H_2O$) with mine. amounts of alunogen (Al$_2$(SO$_4$)$_3$${\circ}$17$H_2O$) and hexahydrite (MgSO$_4$${\circ}$<.TEX>6$H_2O$). Gypsum was identified from both of the bottom precipitates and the evaporation residues of acid mine water. Alunogen, an aluminum sulfate hydrate, was also formed by evaporation and occurred as needle-like crystals. Aluminum is derived from chemical dissolution of alumine-silicate mineral such as pyre-phyllite, illite and chlorite in wasted rocks. Hexahydrite in evaporation residues occured as needle-like, fibrous, and acicular crystals and was associated with gypsum and alunogen.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.833-841
• /
• 2008

Recently, the upheaval generation in the road which is under service had been reported. Due to the upheaval generation, total 4 lanes were forced to curtail to 3 lanes, and traffic was delayed. In normal situation of cut-slopes in korea, that condition is hard to detect since most cut-slopes contain discontinuous material, that is rock. Common collapses in rock-slopes is wedge failure, plane failure and toppling failure which is all individual mechanism of discontinuous rock mass. In contrast, such upheaval in the road in front of cut-slope can be generated only when circular movement is triggered within the cut-slope. In this sense, rock-slopes barely show any kind of movement in the road locates at the front of them. Numerical analysis is general method in simulation of slope displacement and evaluation of safety. However, numerical analysis programs which are related with rock-slopes are not able to simulate such upheaval movement because that programs are based on discontinuous modeling mechanism. In addition, although numerical analysis programs which are based on FEM/FDM and thus utilize continuous modeling mechanism are able to simulate circular movement and upheaval situation, they have weakness in reflecting discontinuities of rock-slope itself. In this study, detailed in-site investigation and numerical analysis based on in-site condition were performed in order to expect upheaval movement in the road. In this procedure, the FLAC program which uses continuous modeling method was utilized, and new approach reflecting discontinuity developed toward the road with a ubiquitous joint model was tried to derive reliable analysis result.