• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1504-1514
• /
• 2018

The objective of this study is to compare the suitability of a non-parametric and 3 parametric distributions in the characterization of prediction intervals of photovoltaic power forecasts with high confidence levels. The prediction intervals of the forecasts are calculated using a method based on recent past data similar to the target forecast input data, and on a distribution assumption for the forecast error. To compare the suitability of the distributions, prediction intervals were calculated using the proposed method and each of the 4 distributions. The calculations were done for one year of day-ahead forecasts of hourly power generation of 432 PV systems. The systems have different sizes and specifications, and are installed in different locations in Japan. The results show that, in general, the non-parametric distribution assumption for the forecast error yielded the best prediction intervals. For example, with a confidence level of 85% the use of the non-parametric distribution assumption yielded a median annual forecast error coverage of 86.9%. This result was close to the one obtained with the Laplacian distribution assumption (87.8% of coverage for the same confidence level). Contrasting with that, using a Gaussian and Hyperbolic distributions yielded median annual forecast error coverage of 89.5% and 90.5%.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.131-131
• /
• 2010

We compared the electrical, optical, structural, and interface properties of indium zinc oxide (IZO)-Ag-IZO and IZO-Au-IZO multilayer electrodes deposited by linear facing target sputtering system at room temperature for organic photovoltaics. The IZO-Ag-IZO and IZO-Au-IZO multilayer electrodes show a significant reduction in their sheet resistance (4.15 and 5.49 Ohm/square) and resistivity ($3.9{\times}10^{-5}$ and $5.5{\times}10^{-5}$Ohm-cm) with increasing thickness of the Ag and Au layers, respectively. In spite of its similar electrical properties, the optical transmittance of the IZO-Ag-IZO electrode is much higher than that of the IZO-Au-IZO electrode, due to the more effective antireflection effect of Ag than Au in the visible region. In addition, the Auger electron spectroscopy depth profile results for the IZO/Ag/IZO and IZO/Au/IZO multilayer electrodes showed no interfacial reaction between the IZO layer and Ag or Au layer, due to the low preparation temperature. To investigate in detail the Ag and Au structures on the bottom IZO electrode with increasing thickness, a synchrotron x-ray scattering examination was employed. Moreover, the OSC fabricated on the IZO-Ag-IZO electrode shows a higher power conversion efficiency (3.05%) than the OSC prepared on the IZO-Au-IZO electrode (2.66%), due to its high optical transmittance in the wavelength range of 400-600 nm, which is the absorption wavelength of the P3HT:PCBM active layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.93-93
• /
• 2010

Semiconductor nanocrystal quantum dots (NQDs) have recently attracted considerable interest for use in photovoltaics. Band gaps of NQDs can be tuned over a considerable range by varying the particle size thereby allowing enhance absorption of solar spectrum. NQDs, synthesized using colloidal routes, are solution processable and promise for a large-area fabrication. Recent advancements in multiple-exciton generation in NQD solutions have afforded possible efficiency improvements. Various architectures have attempted to utilize the NQDs in photovoltaics, such as NQD-sensitized solar cell, NQD-bulk-heterojuction solar cell and etc. Here we have fabricated CdSe NQDs with the band gap of 1.8 eV to 2.1 eV on thin-layers of p-type organic crystallites (1.61 eV) to realize a donor-acceptor type heterojuction solar cell. Simple structure as it was, we could control the interface of electrode-p-layer, and n-p-layer and monitor the following efficiency changes. Specifically, surface molecules adsorbed on the NQDs were critical to enhance the carrier transfer among the n-layer where we could verify by measuring the photo-response from the NQD layers only. Further modifying the annealing temperature after the deposition of NQDs on p-layers allowed higher conversion efficiencies in the device.

• 한국지열·수열에너지학회논문집
• /
• 제19권1호
• /
• pp.1-13
• /
• 2023

Many government in the world have conducted building energy performance certification program to reduce building energy consumption. In this study, a reference building and its HVAC system was modeled, and the energy load and consumption were estimated by the ECO2 program. The software is a simple building energy simulation program based on monthly calculated method. The building energy efficiency rating the the reference building was 1+ under baseline condition. The simulation results showed that the insulation performance slightly affected building energy load and consumption, but light density had a significant effect on them. The application of geothermal heat pumps gave improvement of building energy efficiency rating but it could not make it possible to get zero energy building(ZEB) certification. The ZEB 5 certification could be achieved by using photovoltaics, however getting better grade was difficult. The simulation results showed that the ZEB 4 certification, one grade higher than ZEB 5, could be attained by using more than one renewable energy source such as geothermal and solar energy in this study.

• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.151-155
• /
• 2015

The interfacial electronic structure between zinc phthalocyanine (ZnPc) and aluminumdoped zinc oxide (AZO) substrates has been evaluated by ultraviolet photoemission spectroscopy and angle-dependent x-ray absorption spectroscopy to understanding the molecular orientation of a ZnPc layer on the performance of small molecule organic photovoltaics (OPVs). We find that the ZnPc tilt angle improves the ${\pi}-{\pi}$ interaction on the AZO substrate, thus leading to an improved short-circuit current in OPVs based on phthalocyanine. Furthermore, the molecular orientation-dependent energy level alignment has been analyzed in detail using ultraviolet photoemission spectroscopy. We also obtained complete energy level diagrams of ZnPc/AZO and ZnPc/indium thin oxide.

• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.167-171
• /
• 2015

Quantum-confined nanostructures open up additional perspectives in engineering materials with different electronic and optical properties. We have fabricated unique cation-exchanged CdS and CdS/CdSe quantum dots and measured their first four exciton transitions. We demonstrate that the relationship between electronic transitions and charge-carrier distributions is generalized for a broad range of core-shell nanostructures. These nanostructures can be used to further improve the performance in the fields of bio-imaging, light-emitting devices, photovoltaics, and quantum computing.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.47.1-47.1
• /
• 2010

태양전지는 태양광을 직접 전기로 변환하는 소자로서, 무공해 신재생 에너지로 각광받고 있다. 이러한 태양전지의 상용화를 위하여 발전효율과 경제성을 높이기 위한 많은 연구가 진행되고 있으며, 특히 도심형 건물의 외장재를 태양전지로 활용하는 건물통합형 태양광 발전 (BIPV : building integrated photovoltaics)등에 대한 연구가 활발하다. 따라서, 본 조사 연구에서는 태양전지 기판소재의 요구특성을 조사하고, BIPV용으로 적용 가능한 유연한 금속기판의 개발을 위한 기술적 방법을 제시하고자 하였다. 현재 태양전지의 기판은 비정질 혹은 결정질 실리콘 기판과 라임유리 기판이 주로 사용되고 있으며, 특수용도로 고가의 폴리이미드 고분자 필름이 사용되고 있다. 그러나 BIPV의 다양한 응용을 위해서는 저가의 유연한 기판이 절실히 요구되고 있다. 스테인레스 금속박판은 인성 및 강도가 우수하고, 유연하여 다양한 형태로 가공이 가능하며, 가격이 저렴하고, 다양한 표면개질기술이 적용될 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.370.2-370.2
• /
• 2016

투명 박막 태양전지는 건물과 일체화 된 building-integrated photovoltaics (BIPV) 시스템에 적용되어 건물의 외장재로서 외관의 심미적 가치를 높일 수 있다. 현재 BIPV 모듈은 glass 타입의 형태가 시장을 주도할 것으로 예상되며[1], 건물의 외부 미관을 고려하여 투명 박막 태양전지에 색을 구현하는 연구가 진행되고 있다. 투명 박막 태양전지에 적용하기 위한 목적으로 본 연구에서는 스핀코팅을 이용하여 표면 플라즈몬 효과가 큰 Cu 나노입자를 Si 웨이퍼와 유리기판 위에 각각 분포 시킨 후, 광학적 특성을 분석하였다. 스핀코팅의 속도(rpm)를 다양하게 변화 시킨 후 나노 입자의 분포를 관찰하였으며, 속도가 증가할수록 나노입자의 수는 감소함을 확인하였다. 또한 속도가 증가할수록 입자 사이의 거리는 멀어졌으며, 최저 속도 100 rpm에 비해 4000 rpm에서 스핀코팅 한 입자들은 응집이 상대적으로 되지 않았음을 관찰하였다. 속도가 증가할수록 입자가 기판 위에 적게 잔재하기 때문에 반사율과 투과율이 가시광선 영역에서 증가하였으며, 유리 기판에 구현한 색깔이 점차 옅어짐을 관찰하였다. 이러한 결과로부터 스핀코팅의 속도를 변화시킴으로써 나노입자의 분포 양상과 이에 따른 색상의 변화를 유발 할 수 있다는 사실을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.199-201
• /
• 2008

This paper persents charge/discharge system for small PV using micro-processor. Charge/discharge system designs a Buck converter and using constant voltage charge system because regular voltage is rather high a condenser. Besides, we did compensate for charge voltage of condenser through a temperature compensation circuit. We consists of a 170W stand-alone PV system to observe charge/discharge system character. In the result of search about output character we know that charge and discharge are smoothly running.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.147-149
• /
• 2005

Synthesis of $TiO_2$ nanoparticle paste is one of the important technologies in dye-sensitized solar cells (DSSC). Performances of the DSSCs from synthesized $TiO_2$ nanoparticle paste was similar or better than those from commercial sources. In addition. cell efficiency was further improved by using large scattering $TiO_2$ particles. Those results was utilized in manufacturing high efficiency DSSC modules.