• 한국지반공학회논문집
• /
• 제32권10호
• /
• pp.31-40
• /
• 2016

트랩도어 하강이 일어나는 토체 내부에서 발생하는 흙 아치 구조의 변화를 관찰하기 위해서 광탄성 측정 기법을 이용하여 입상체의 다양한 거동을 관찰하였다. 광탄성 반응 재료로 코팅된 원주형 모형 입자를 적층하여 입상체를 구성하였다. 광탄성 기법을 이용하여 입상체 내부에서 발생하는 입자 간 접촉력 전달 구조의 변화를 촬영하여 관찰하였으며 이를 입상체 하부 로드셀에서 측정된 압력 변화 및 내부 활동면의 변화 양상과 비교 분석하였다. 트랩도어 하강 초기에 형성된 흙 아치 구조는 하강이 지속되면 붕괴되지만 다시 확장된 아치 구조가 새롭게 형성되었다. 트랩도어 하강 초기에 일치하였던 흙 아치 구조의 경계면과 활동면은 트랩도어 하강이 진행되면서 활동면이 포함된 영역이 접촉력을 잃은 영역 내부에 포함되었다.

• 비파괴검사학회지
• /
• 제20권3호
• /
• pp.213-220
• /
• 2000

광탄성법은 투명한 물체에 힘을 가하면 복굴절 현상이 나타나며, 편광기에 의해 등색 및 등경프린지가 나타난다. 등색프린지를 이용하여 주응력차이 또는 평면상 전단응력을 계산할 수 있으며, 등경프린지에 의해 주응력 방향을 결정할 수 있다. 재래식 광탄성법에서는 특정한 위치에서 프린지를 개별적으로 측정해야 되는 불편한 점이 있어, 디지털 영상처리에 의해 광탄성 프린지로부터 전체적인 응력장을 해석할 수 있도록 프린지이동에 의한 위상이동법이 개발되었다. 프린지 위상이동법은 원형편광기에서 검광자를 $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ 및 $135^{\circ}$회전시켜 프린지가 이동된 4개의 영상을 얻고, 이들로부터 위상차이로 나타나는 프린지분포를 측정한다. 본 연구에서는 프린지 위상이동법에 관한 광학적인 이론을 이용하여 압축하중을 받는 원형디스크의 프린지분포를 위상이동법으로 측정한 후 이론 값과 비교하였다. 또한, 인장하중을 받는 에지균열판의 응력분포 해석에 프린지 위상이동법을 적용하였다. 실험결과, 프린지 위상이동법으로 측정한 결과는 유한요소 해석 결과와 잘 일치하였다. 광탄성에서 위상이동법은 등경선과 평행하거나 직교하는 선상에서 응력 분포를 용이하게 측정할 수 있으나, 일반적인 프린지 해석시 프린지 위상이동법을 적용하면 오차가 포함될 수 있다.

• 비파괴검사학회지
• /
• 제21권2호
• /
• pp.189-196
• /
• 2001

광탄성법은 전체적인 응력장 해석을 위하여 가장 많이 사용되는 방법중의 하나이다. 광탄성법에서 주응력의 차이와 방향은 등색선과 등경선으로 나타난다. 재래식 방법으로는 주응력 방향은 평면 편광기의 편광자와 검광자를 동시에 회전시켜 수작업으로 측정하며, 이를 타디보간법이라 한다. 이러한 방법은 전체적인 응력장 해석시 매우 번거로우며 많은 시간이 걸린다. 재래식 광탄성법에서는 광탄성 프린지로부터 등경선을 분리시킬 수 없다. 본 연구에서는 광탄성이론을 Jones행렬로 나타내고 4단계와 8단계의 위상이동법에 대해서 기술하였다. 컴퓨터시뮬레이션을 통하여 압축하중을 받는 원형디스크의 광탄성 프린지로부터 등경선과 등색선을 분리시킬 수 있는 시험을 하였다. 디스크의 프린지는 응력-광 법칙에 의하여 생성하였다. 8단계 위상이동법으로 얻은 등경선과 등색선의 크기를 이론으로 계산한 값과 비교하였다. 컴퓨터 시뮬레이션으로부터 광탄성 프린지로부터 등경선과 등색선을 분리시킬 수 있는 가능성을 예시하였다.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.120-131
• /
• 2005

Statement of problem. More than 70% of patients who need the implant supported restoration are parially edentulous. The principles of design for implant supported fixed partial denture in mandibular posterior region are many and varied. Jurisdiction for their use is usually based on clinical evaluation. There are several areas or interest regarding the design of implant supported fixed partial denture in mandibular posterior region. 1) Straight and tripod configuration in implant placement, 2) Two restoration types such as individualized and splinted restorations. Purpose. The purpose of this study was to compare the amount and distribution of stress around the implant fixtures placed in the mandibular posterior region with two different arrangements and to evaluate the effects of splinting using the photoelastic stress analysis. Material & methods. 1) Production of study model: Mandibular partially edentulous model was waxed-up and duplicated with silicone and two models were poured in stone. 2) Fixture installation and photoelastic model construction: Using surveyor(Ney, USh), 3 fixtures(two 4.0 $\times$13 mm, one 5.0$\times$10 mm, Lifecore, USA) were insta)led in straight & tripod configurations. Silicone molds were made and poured in photoelastic resin (PL-2. Measurements group, USA). 3) Prostheses construction: Four 3-unit bridges (Type III gold alloy, Dongmyung co., Korea) were produced with nonhexed and hexed UCLA abutments and fitted with conventional methods. The abutments were tightened with 30 Ncm torque and the static loads were applied at 12 points of the occlusal surface. 4) Photoelastic stress analysis : The polarizer analyzer system with digital camera(S-2 Pro, Fujifilm, Japan) was used to take the photoelastic fringes and analysed using computer analysis program. Results. Solitary hexed UCLA restoration developed different stress patterns between two implant arrangement configurations, but there were no stress transfer to adjacent implants from the loaded implant in both configurations. However splinted restorations showed lesser amount of stresses in the loaded implants and showed stress transfer to adjacent implants in both configurations. Solitary hexed UCLA restoration with tripod configuration developed higher stresses in anterior and middle implants under loading than implants with straight configurations. Splintied 3 unit fixed partial dentures with tripod configuration showed higher stress development in posterior implant under loading but there were no obvious differences between two configurations. Conclusions. The tripod configuration of implant arrangement didn't show any advantages over the straight configuration. Splinting of 3 unit bridges with nonhexed UCLA abutments showed less stress development around the fixtures. Solitary hexed UCLA restoration developed tilting of implant fixture under offset loads.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.709-719
• /
• 1994

The aim of this investigation was to identify which suing is more suitable for uprighting of the 30 degree inclined lower second molar in different situations. Between four different molar uprighting springs which were A, B, C type and T-loop spring, the author tested T-loop suing as a control material and the other springs were experimental group. Each spring was fabricated from .017' $\times$ .025' TMA wire and preactivated with 40 degree tip-back bend. Stabilizing unit included from the lower right central incisor to the lower right second premolar which were made by acrylic resin. The photoelastic overview of the lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature than the mesial of the lower second molar when A type uprighting spring was applied, which can be used as a space regainer. 2. Higher level compression was presented at the mesial root apex area than the distal of the lower second molar in B type uprighting spring, which can be used as a space closer. 3. Areas of higher compression and tension were observed about the mesial and distal root of the lower second moalr than A and B type in C type uprighting spring, which can be used as a partial space regainer.

• 대한기계학회논문집
• /
• 제7권1호
• /
• pp.1-10
• /
• 1983

The photoelastic determination of S.I.F. in Fracture mechanics has been regarded as one of the most effective and practical experimental methods in which stresses are read directly, except a few shortcomings involved in the process of experiment; the difficulties of making a sharp crack tip similar to the practical one and nearly impossibilities of carving an arbitrarily shaped crack on the test plate, etc. To eliminate flaws mentioned above, recently, Kitagawa and Watanabe of Tokyo Univ.developed a new method named"Teflon Insert Method". which has improved experimental accuracy to a considerable extent byt remaining still room for further improvement, that is, the elimination of bonding boundary scars which render photoelastic fringes obscure. In this paper, a newly exploited"Teflon Molding Method" was attempted for the completion of teflon-epoxy experimental method. The experimental results obtained by this method are compared with existent theoretical and experimental values to evaluate its accuracy. As result, 1-6% of margin of errors were appeared in a series of photoelastic experiments which defied any other conventional method in terms of experimental accuracy.perimental accuracy.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1904-1911
• /
• 1999

The most effective material in the shape memory alloy(SMA) is the TiNi alloy, because its shape recovery characteristics are very excellent. We molded the composite material with shape memory function. The fiber of it is $Ti_{50}-Ni_{50}$ shape memory alloy and matrix of it is epoxy resin(Araldite B41, Hardner HT903. Ciba Geigy), its adhesive and optical sensitivity are very excellent. It was assured that the composite material could be used as model material of photoelastic experiment for intelligent materials or structures. In this research, the composite material with shape memory function is used as model material of photoelastic experiment. Photoelastic experimental hybrid method is developed in this research, it is assured that it is useful on the obtaining stress intensity factor and the separation of stress components from only isochromatic data. The measuring method of stress intensity factor of intelligent material by photoelastic experiment is introduced. In the mode I state, we can know that stress intensity factors are decreased more than 50% of stress intensity factor of room temperature when temperature of fiber is greater than 4$0^{\circ}C$, prestrain greater than 5% and fiber volume ratio greater than 0.42% and that stress intensity factors are decreased by 100% when fiber volume ratio is greater than 0.84%, prestrain greater than 5% and temperature greater than 60 $^{\circ}C$.

• 구강회복응용과학지
• /
• 제24권3호
• /
• pp.253-267
• /
• 2008

이 연구의 목적은 임플란트 고정체와 지대주간의 직경 차이가 임플란트 지지조직에 발생하는 응력에 미치는 영향을 평가 하는 것이다. 본 연구에는 세 가지 직경(4.0, 5.0, 6.0㎜)의 3i 임플란트 고정체에 지대주의 직경을 달리하여 수복하고, 하중 조건(15, 30 lb)에 따라 임플란트 지지조직에 발생한 응력의 정도와 분포를 광탄성 응력 분석법을 이용하여 비교, 분석하였다. 연구결과 고정체의 직경이 증가할수록, 상부 보철물에 가해지는 하중에 대하여 고정체 변연부의 응력집중이 높게 나타났으며, 상부 보철물의 근원심 폭경을 증가시키는 것이나, 임플란트 고정체의 직경에 비해 작은 지대주를 사용하는 것은 고정체 주위의 응력양상에 영향을 주지 않았다.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.379-400
• /
• 1992

The purpose of this study was to analyze the magnitude and distribution of stress using a photoelastic model from the mandibular distal extension removable partial dentures with the mesial or distal placement of the occlusal rest and the mesial or distal connection in the back-action clasp with the five various designs of the back-action clasp, that is, the mesial connection and the distal rest, the distal connection and mesial rest, the mesial connection and mesial rest, the distal connection and the mesial and distal rest, and the mesial connection, and the mesial and distal rest. A photoelastic model was made of the epoxy resin(PC-1) and the hardner(PLH-1) with the acrylic resin teeth used and was coated with the plastic cement-1 at the lingual surface of the model and then five kinds of the removable partial dentures on the photoelastic model were set. A unilateral vertical load of 12.5 kg was applied on the central fossa of the first molar with the use of specially designed loading device and the pattern and distribution of the stress of the photoelastic model under each condition was analyzed by the reflective circular polariscope. The following results were obtained. 1. In the back-action clasp with the mesial connection and mesial rest of the case 3, the effect of the stress distribution was the most favorable. 2. In the back-action clasp with the mesial and distal rest, of the case 4 and 5, the stress distribution was more greatly showed in the terminal abutment. 3. Generally, the stress distribution was more favarable in the mesial connection than in the distal connection. 4. In the back-action clasp with the mesial connection of the case 1, 3 and 5, the stress distribution was the most favorable in the mesial rest.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.127-133
• /
• 2001

Photoelastic isochromatic fringes related to the difference of principal stresses have some bandwidth whose light intensities are not constant and unsymmetrical in experimental image. Hence it is difficult to measure fringe order accurately at a data point by visual observation. In this study, the method of fringe sharpening, which can extract sharpened lines from both full-and half-order fringes by digital image processing, is developed. To test the method, various simple photoelastic fringe patterns are simulated and their image are processed to yield sharpened lines. The method is than applied to general problem such as image of a circular disk compressed by concentrated loads and a cylinder subjected to internal pressure. The procedure is proved to be capable of extracting sharpened lines accurately from photoelastic isochromatic fringes.