• 한국안전학회지
• /
• 제11권4호
• /
• pp.64-71
• /
• 1996

Detonation phenomena of $C_2H_2$were invesgated using the various shock tube. To study the detonation characteristics according to the composition of $C_2H_2-0_2$$_2$ and $C_2H_2$-air mixtures, the composition were varied from 5 to 90% and 5 to 50% of acetylene each other. A spiral ring was installed in the shock tube to study the effect of obstacles in DDT phenomena. Detonation velocities were measured using the photodiode, and the DDT phenomena was visualized using the high speed schlieren photograph. From the experimental result, it was found that the detonation velocity was most high near the 1. 8times the stoichiometric ratio of acetylene. And from the visualization of DDT phenomena, it was found that the detonation wave was strengthened throuth the pile up of small compression wave of burned gas. And the obstacles in shock tube accelerate the detonation reaction by turblent effect of flammable gas mixture.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.223-226
• /
• 2003

본 연구에서는 패러데이 효과(Faraday Effect)를 이용한 초고압 전력설비에서의 광전류 센서의 특성에 대한 기초 연구를 하였다. 광원은 Laser Diode(1310[nm])를 사용하고, 수신부는 PIN-Photodiode를 사용하였다. 센싱부로 사용한 광섬유는 single mode unjacked fiber를 사용하였고, 편광기를 사용하여 빛의 광학적인 편파면을 이용한 전류측정이 가능함을 확인할 수 있었다. 측정 결과에서는 전류에 따른 출력 신호가 나옴으로써 기존 문헌상의 결과와 동일하다는 것을 알 수 있었고 센싱부로 사용한 파이버의 길이에 따른 출력차이를 통해 파이버의 길이가 길수록 강도가 커진다는 것을 알 수 있었다. 또한 길이에 따라 출력의 차이뿐만 아니라 선형성까지도 차이가 난다는 것을 알 수 있었다. reference 값과 광전류센서의 출력 강도와의 오차율을 구했을 때 5[m] 10[m]길이의 광섬유 각각에 대해서 1000[A]이상의 값에서 각각 약 -0.9[%], -0.4[%]의 오차율을 보임을 확인했다. 여기서 인가한 전류값과 길이 즉, 감은 수에 따라 그 오차율이 점점 나아질 수 있다는 것을 알 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.365-367
• /
• 2006

광용적맥파를 이용하여 일상생활에서 심장 박동을 관찰하고 심장 박동의 이상을 경고할 수 있는 저렴하면서도 간단한 심박 측정 장치를 구성하고 심장박동을 검출하였다. 심장박동의 검출을 위해 Ring형 광용적맥파 센서를 635nm의 적색 LD와 Si Photodiode로 제작하였다. 제작된 Ring형 광용적맥파 센서는 잡음 및 오차로 작용하는 외부 광원을 차단하였으며, 동(動)잡음의 영향을 최소화하기 위해 측정부위에 밀착하도록 하였다, 측정결과 제작된 센서는 심장박동 신호를 외부 영향 없이 안정적인 검출이 가능함을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.535-536
• /
• 2005

Organic photovoltaic effects were studied in a device structure of ITO/CuPc/Al and ITO/CuPc/$C_{60}$/BCP/Al. A thickness of CuPc layer was varied from 10 nm to 50 nm, we have obtained that the optimum CuPc layer thickness is around 40 nm from the analysis of the current density-voltage characteristics in CuPc single layer photovoltaic cell. From the thickness-dependent photovoltaic effects in CuPc/$C_{60}$ heterojunction devices, higher power conversion efficiency was obtained in ITO/20nm CuPc/40nm $C_{60}$/Al, which has a thickness ratio (CuPc:$C_{60}$) of 1:2 rather than 1:1 or 1:3. Light intensity on the device was measured by calibrated Si-photodiode and radiometer/photometer of International Light Inc(IL14004).

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.857-861
• /
• 2012

FPN (fixed-pattern-noise) mainly comes from the device or pattern mismatches in pixel and color filter, pixel photodiode leakage in CMOS image sensor. In this paper, optical stack module related pixel FPN was investigated and the classification of pixel FPN contribution with the individual optical module process was presented. The methodology and procedure would be helpful in reducing the greater pixel FPN and distinguishing the complex FPN sources with respect to various noise factors.

• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.169-173
• /
• 2009

We studied driving characteristics according to the ratio of mass and charging (m/q) value for charged toner particles with black and yellow color in charged particle type display panel. After biasing rectangle pulse to the transparency electrodes of putted panel with toner particles, its response time and contrast ratio are simultaneously measured using a laser as a optical source, photodiode as a detector and reflective system. As a results, contrast ratio is largest at the shortest response time region which is different to the particle because of m/q. We proposed relational equation for response time, m/q, cell gap and biasing voltage. It has not been studied and reported to analyze the relationship of response time, biasing voltage, lumping phenomena, cell gap, and contrast ratio for toner particle type display.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.67-76
• /
• 2013

We present an innovative real-time laser welding monitoring technique employing the correlation analysis of the plasma plume optical emission generated during the process. The plasma optical radiation emitted during Nd:YAG laser welding of S45C steel samples has detected with a Photodiode and analyzed under different process conditions. The discrete DC voltage difference, filter methods and wavelet transform has been used to decompose the optical signal into various discrete series of sequences over different frequency bands. Considering that wavelet analysis can decompose the optical signals, extract the characteristic information of the signals and define the defects location accurately, it can be used to implement process-control of laser welding.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.182-182
• /
• 2010

본 연구에서는 Pt 배면전극에 다양한 조건에서의 ZnO를 성장하여 Schottky 구조를 제작, 접합 특성 및 자외선 검출 특성을 연구하였다. $Al_2O_3$ 기판에 Mirror-like하며 고결정성을 갖는 Pt(111) 배면전극을 형성 후, ZnO 박막의 성장 조건에 따른 접합 특성을 확인하기 위하여 기판온도와 산소분압을 각각 $400{\sim}600^{\circ}C$ ($50^{\circ}C$ 단계), 0~60 sccm (15 sccm 단계)로 성장하였다. 이에 따른 구조적 특성변화를 확인하기 위하여 주사전자현미경 및 X선 회절 특성을 분석하였으며, 전류-전압 특성 곡선을 분석을 통하여 최적의 Schottky contact 형성을 위한 ZnO 성장조건을 규명하고자 하였다. $H_2O_2$를 이용한 표면처리와 Rapid Thermal Annealing (RTA)를 이용한 열처리 과정을 통하여 표면 처리 전 후의 전기적 특성과 광학적 특성의 변화를 비교 분석하였다. 또한 Ohmic 접촉으로 상부전극을 형성, ZnO Schottky photodiode 구조를 제작하여 UV-A, B, C 영역에 따른 UV반응 특성을 분석하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.261.1-261.1
• /
• 2013

Well-aligned nanowire arrays can be used as building blocks for nanoscale device. Recently, we reported that well-aligned single-crystal organic nanowires has been created by using a direct printing method which is named liquid-bridge mediated nanotransfer molding (LB-nTM). Moreover, multi-layering nanostructures can be fabricated by repeating this printing process. As a result, it is possible to make simple and basic concept of heterojunction devices such as crossed nanowire devices. We fabricated crossed single-crystal organic nanowires nanojunction devices from 6,13-bis (triisopropylsilylethynyl) pentacene (TIPS-PEN) and fullerene (C60) single-crystal nanowires using by direct printing method in solution process. Crossed TIPSPEN/ C60 single-crystal nanowires diode has rectifying behavior with on/off ratios of ~13. In addition, the device shows photodiode characteristics as well as rectification. Our study represent methodology of heterojunction devices using single-crystal nanowires, thereby provide a new direction of future nanoelectronics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.178.2-178.2
• /
• 2013

Conventional ultraviolets A,B,C are known to be very important factor of killing, changing surface properties of biological cells and materials. It is of great importance to investigate the influence of extreme ultraviolet (EUV) exposure on the biological cell. Here we have studied high density EUV plasma and its emission characteristics, which have been generated by plasma focus device with hypercycloidal pinch (HCP) electrode under various Ar gas pressures ranged from 30~500 mTorr in this experiment. We have also measured the plasma characteristics generated from the HCP plasma focus device such as electron temperature by the Boltzman plot, plasma density by the Stark broading method, discharge images by open-shuttered pin hole camera, and EUV emission signals by using the photodiode AXUV-100 Zr/C.