• Journal of Microbiology and Biotechnology
• /
• v.22 no.3
• /
• pp.400-406
• /
• 2012

To improve the hydrogen yield from biological fermentation of organic wastewater, a co-culture system of dark- and photo-fermentation bacteria was investigated. In a pure-culture system of the dark-fermentation bacterium Clostridium butyricum, a pH of 6.25 was found to be optimal, resulting in a hydrogen production rate of 18.7 ml-$H_2/l/h$. On the other hand, the photosynthetic bacterium Rhodobacter sphaeroides could produce the most hydrogen at 1.81mol-$H_2/mol$-glucose at pH 7.0. The maximum specific growth rate of R. sphaeroides was determined to be 2.93 $h^{-1}$ when acetic acid was used as the carbon source, a result that was significantly higher than that obtained using either glucose or a mixture of volatile fatty acids (VFAs). Acetic acid best supported R. sphaeroides cell growth but not hydrogen production. In the co-culture system with glucose, hydrogen could be steadily produced without any lag phase. There were distinguishable inflection points in a plot of accumulated hydrogen over time, resulting from the dynamic production or consumption of VFAs by the interaction between the dark- and photo-fermentation bacteria. Lastly, the hydrogen production rate of a repeated fed-batch run was 15.9 ml-$H_2/l/h$, which was achievable in a sustainable manner.

• 전기의세계
• /
• v.25 no.5
• /
• pp.63-69
• /
• 1976

Among various types of photo-electric energy conversion element which can transfer solar energy into electric energy through the photo voltaic effect, Si solar cells were investigated on photoelectric characteristics, improvements of its efficiency and economical evaluation for its production cost. To study the above subjects, we decided best conditions on fabricating of thin film Si solar cell by epitaxial growth and knew that the thin solar cell by epitaxial growth was more efficient than that by diffusion process. And also higher photo voltaic output was obtained as a effect of SiO as antireflection coating by several methods, i.e. vacuum evaporating techniques of electrode to decrease the contact resistance and to form best ohmic contact, and concentration techniques of sun's ray by lenz or both-sided illumination through special structure for reflection using mirrors.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.393-400
• /
• 2005

Hydrogen($H_2$) as a clean, and renewable energy carrier will be served an important role in the future energy economy. Several biological $H_2$ production processes are known and currently under development, ranging from direct bio-photolysis of water by green algae, indirect bio-photolysis by cyanobacteria including the separated two stage photolysis using the combination of green algae and photosynthetic microorganisms or green algae alone, dark anaerobic fermentation by fermentative bacteria, photo-fermentation by purple bacteria, and water gas shift reaction by photosynthetic or fermentative bacteria. In this paper, biological $H_2$ production processes, that are being explored in fundamental and applied research, are reviewed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.89-99
• /
• 2000

The Quality and Accuracy of digital image is important factor for decision of accuracy in digital photogrammetry because all the inside works in digital photogrammetry are based on digital image. But it is still difficult to ensure quality assurance and appication of data because there is no distinct criterion about quality and accuracy of digital image when the works in digital photogrammetry is accomplished. This study presents optimal resolution of aerial photo through error analysis of image coordinate using auto inner orientation in digital photograrnrnetry workstation. In second step, we are valified to optimum resolution of aerial photo image with orientation analysis. Finally, we are established to validity optimal resolution of aerial photo image with production of ortho image and mosaic image using optimal resolution aerial photo image.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.9
• /
• pp.810-815
• /
• 2005

As the pharmaceutical industry grows and becomes more competitive, the need of automation increases to establish effective mass production and to maintain consistent quality control. Accurate counting and packing of medicinal pills is one of the most essential processes that the automation can benefit. In conventional automated counting and packing processes, the performance of counting process varies with the size, the shape and the dispersion degree of pills. In this research, the authors developed a new pill-counting algorithm based on carefully analyzed characteristics of the pill-drop behavior. Also a new scheme for the packing of an exact number of pills has been implemented. A pill counting and packing machine with the new pill-counting algorithm and the new packing scheme has been constructed and put in an actual production line. To achieve precise and quick sensing of pills dropping at a high speed from the preceding processors, the machine uses non-contact photo sensors. Experimental results from the actual process using the machine are included to verify the effectiveness of the proposed algorithm and the machine.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.351-360
• /
• 2016

Rapid population growth with high living standards and high electronics use for personal comfort has raised the electricity demand exponentially. To fulfill this elevated demand, conventional energy sources are shifting towards low production cost and long term usable alternative energy sources. Hybrid renewable energy systems (HRES) are becoming popular as stand-alone power systems for providing electricity in remote areas due to advancement in renewable energy technologies and subsequent rise in prices of petroleum products. Wind and solar power are considered feasible replacement to fossil fuels as the prediction of the fuel shortage in the near future, forced all operators involved in energy production to explore this new and clean source of power. Presented paper proposes fuzzy logic based Energy Management System (EMS) for Wind Turbine (WT), Photo Voltaic (PV) and Diesel Generator (DG) hybrid micro-grid configuration. Battery backup system is introduced for worst environmental conditions or high load demands. Dump load along with dump load controller is implemented for over voltage and over speed protection. Fuzzy logic based supervisory control system performs the power flow control between different scenarios such as battery charging, battery backup, dump load activation and DG backup in most intellectual way.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.38-49
• /
• 1998

The 3rd generation optical pick-up used popularly in resent years is composed of many optical and electronic components such as laser diode, photo diode, beam splitter, objective lens, grating lens, concave lens, collimator lens etc. Therefore, the design of its optical system and its main base which the said optical and electronic components are set on, is complicated and needs high precision. Its assembly and adjustment in the production line is also difficult. This complication and the demand of high precision get its production cost to be high and its reliability to be low. In this paper, the 4th generation optical pick-up is designed and developed, with the hologram device which laser diode. photo diode, beam splitter. and grating lens are integrated in. This optical pick-up reduces the number of points of adjustment by 3, compared with the 3rd generation optical pick-up of which the number of points of adjustment is 6. This optical pickup also decreases by 4 the number of points of W bonding to have bad influence on environmental reliability, decreases by about 10 the number of parts, and establishes about 20% cost-down of material cost, compared with the 3rd generation optical pick-up.

• Journal of Welding and Joining
• /
• v.17 no.3
• /
• pp.26-35
• /
• 1999

On the laser weld production line, a slight alteration of the welding condition changes the bead size and the strength of the weldment. The measurement system is produced by using three photo-diodes for detection of the plasma and spatter signal in $CO_2$ laser welding. The relationship between the sensor signals of plasma or spatter and the bead shape, and the mechanism of the plasma and spatter were analyzed for the bead size estimation. The penetration depth and the bead width were estimated using the multiple regression analysis.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.302-308
• /
• 2009

This study investigated the production of hydrogen over Ga (1.0, 2.0, and 5.0 mol%)-$TiO_2$ photocatalysts prepared by a solvothermal method. The absorption band was slightly blue-shifted upon the incorporation of the gallium ions, but the intensity of the photoluminescence (PL) curves of Ga-incorporated $TiO_2$s was distinguishably smaller, with the smallest case being the 2.0 mol% Ga-$TiO_2$, which was related to the recombination between the excited electrons and holes. $H_2$ evolution from photo splitting of water over Ga-incorporated $TiO_2$ in the liquid system was enhanced, compared to that over pure $TiO_2$; particularly, the production of 5.6 mL of $H_2$ gas after 8 h when 1.5 g of the 2.0 mol% Ga-incorporated $TiO_2$ was used.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.926-931
• /
• 2011

Among various techniques for hydrogen production from organic wastewater, a dark fermentation is considered to be the most feasible process due to the rapid hydrogen production rate. However, the main drawback of it is the low hydrogen production yield due to intermediate products such as organic acids. To improve the hydrogen production yield, a co-culture system of dark and photo fermentation bacteria was applied to this research. The maximum specific growth rate of R. sphaeroides was determined to be $2.93h^{-1}$ when acetic acid was used as a carbon source. It was quite high compared to that of using a mixture of volatile fatty acids (VFAs). Acetic acid was the most attractive to the cell growth of R. sphaeroides, however, not less efficient in the hydrogen production. In the co-culture system with glucose, hydrogen could be steadily produced without any lag-phase. There were distinguishable inflection points in the accumulation of hydrogen production graph that resulted from the dynamic production of VFAs or consumption of it by the interaction between the dark and photo fermentation bacteria. Lastly, the hydrogen production rate of a repeated fed-batch run was $15.9mL-H_2/L/h$, which was achievable in the sustainable hydrogen production.