• 제목/요약/키워드: Phosphorus-Back Solution

검색결과 3건 처리시간 0.016초

MBR 공정에서의 인 제거 특성 (Characteristics of Biological Phosphorus Removal in the MBR)

  • 최희정;이승목
    • 대한환경공학회지
    • /
    • 제29권2호
    • /
    • pp.197-204
    • /
    • 2007
  • 이 연구는 EBPR(enhance biological phosphorus removal)의 혐기조건, 호기/무산소 조건 사이의 상호작용을 알아보고 인의 제거 속도와 인 제거에 미치는 영향인자들을 Batch-test로 조사하였다. 실험결과 무산소단계에서 인의 흡수율은 호기 단계보다 50% 정도 낮았고, 인 방출과 인 흡수의 상관관계는 다른 논문들에 비하여 낮았으며, 계수 b는 높았다. Batch-test의 측정 결과 다른 논문들에 비하여 인 방출과 인 흡수의 상관관계$(R^2=0.557)$는 낮았고 계수b (b=8.4049)는 높았다. 또한, 하수에서 인의 중요한 결합 파트너는 Ca, $Mg^{2+}$, Al, Fe 그리고 $K^+$인데 이 실험 결과 칼륨, 마그네슘 그리고 암모니움은 인과 함께 증감함으로써 인의 방출과 흡수에 밀접한 관계가 있음을 알 수 있었다. 즉, 혐기 단계에서 0.2 mol $K^+Ion$ / mol $PO_4-P$ Ion과 0.21 mol $Mg^{2+}Ion$ / mol $PO_4-P$ ion이 측정되어 인에 대한 칼륨 및 마그네슘의 비율은 1 : 5 정도임을 알 수 있었다.

절연막을 이용한 단면 표면조직화 결정질 실리콘 태양전지 (The Single-Side Textured Crystalline Silicon Solar Cell Using Dielectric Coating Layer)

  • 도겸선;박석기;명재민;유권종;송희은
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2011년도 추계학술발표대회 논문집
    • /
    • pp.245-248
    • /
    • 2011
  • Many researches have been carried out to improve light absorption in the crystalline silicon solar cell fabrication. The rear reflection is applied to increase the path length of light, resulting in the light absorption enhancement and thus the efficiency improvement mainly due to increase in short circuit current. In this paper, we manufactured the silicon solar cell using the mono crystalline silicon wafers with $156{\times}156mm^2$, 0.5~3.0 ${\Omega}{\cdot}cm$ of resistivity and p-type. After saw damage removal, the dielectric film ($SiN_x$)on the back surface was deposited, followed by surface texturing in the KOH solution. It resulted in single-side texturing wafer. Then the dielectric film was removed in the HF solution. The silicon wafers were doped with phosphorus by $POCl_3$ with the sheet resistance 50 ${\Omega}/{\Box}$ and then the silicon nitride was deposited on the front surface by the PECVD with 80nm thickness. The electrodes were formed by screen-printing with Ag and Al paste for front and back surface, respectively. The reflectance and transmittance for the single-sided and double-sided textured wafers were compared. The double-sided textured wafer showed higher reflectance and lower transmittance at the long wavelength region, compared to single-sided. The completed crystalline silicon solar cells with different back surface texture showed the conversion efficiency of 17.4% for the single sided and 17.3% for the double sided. The efficiency improvement with single-sided textured solar cell resulted from reflectance increase on back surface and light absorption enhancement.

  • PDF

국내육성 주요 딸기 품종에서 발생하는 구리(Cu) 과잉 증상 및 영양진단을 위한 식물체 내 한계농도 (Characterization of Copper Toxicity Symptoms and Determination of Tissue Critical Concentration for Diagnostic Criteria in Korean Bred Strawberries)

  • 최종명;남민호
    • 원예과학기술지
    • /
    • 제30권5호
    • /
    • pp.477-483
    • /
    • 2012
  • 미량원소인 Cu 시비농도를 인위적으로 조절하여 '금향', '매향' 및 '설향' 딸기를 재배하면서 시비수준이 생장에 미치는 영향을 구명하였다. 또한 생육을 우수하게 유지할 수 있는 식물체의 Cu 한계농도를 밝혀 딸기 재배 시 영양장해를 진단할 수 있는 기초 자료로 활용될 수 있도록 하기 위하여 본 연구를 수행하였다. Cu 시비농도에 영향을 받은 세 종류 딸기 품종의 건물중에서 '금향'과 '매향'은 0.25mM-1.0mM 시비구 간, '설향' 딸기의 경우 0.25mM-3.0mM 시비구 간통계적인 유의차가 없었고, '설향'이 '금향'이나 '매향'보다 Cu 과다시비에 대한 내성이 강함을 알 수 있었다. Cu가 과다하게 시비되어 식물체의 흡수량이 증가하면 신엽에서 엽맥 간 황화현상이나 엽맥 사이에 직선형태의 황화현상이 그리고 하위엽에서는 잎 가장자리가 주황색으로 변하는 증상이 나타났다. 관비용액의 Cu 시비농도를 증가시켜도 세 종류 딸기의 식물체 내 P, K, Ca 및 Mg 함량은 뚜렷한 경향을 발견할 수 없었다. 미량원소 중 Cu 함량은 시비농도가 높아짐에 따라 식물체 내 함량이 직선적으로 증가하였으며, Fe 및 Mo 함량은 관비용액의 Cu 농도에 대한 반응이 뚜렷하지 않았고, 경향도 발견할 수 없었다. '금향', '매향' 및 '설향' 딸기의 최대생장량보다 10% 적은 생장량과 이 때의 식물체내 Cu 함량을 정상 생장을 위한 최대한계점으로 간주하면 '금향' $71.4mg{\cdot}kg^{-1}$, '매향' $57.9mg{\cdot}kg^{-1}$, 그리고 '설향' $74.81mg{\cdot}kg^{-1}$ 이하를 유지하도록 Cu 시비농도를 조절해야 한다고 판단하였다.