• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.428-428
• /
• 2007

최근 고화질 카메라폰이 경박단소화 되는 경향에 따라 Plastic렌즈 또는 구면 Glass렌즈만으로는 요구되는 광학적 성능 구현이 힘들기 때문에 비구면 Glass렌즈에 대한 요구가 증가하고 있다. 이러한 비구면 Glass렌즈는 일반적으로 초경합금 성형용 코어를 이용한 고온압축 성형방식으로 제작되어지기 때문에 코어면의 초정밀 연삭가공 및 코어면 코팅기술 개발이 시급한 상황이다. 한편, 대표적인 난삭재 Silicon Carbide(SiC)는 광학적 특성 및 기계적 특성, 전기적 특성 등 우수한 특성을 가진 재료로서 우주망원경, 레이저 광 및 X선 반사용 미러 등 다종, 다양한 용도로 이용되고 있으며 전기, 전자, 정보, 정밀기기의 급격한 발전으로 SiC의 수요가 급격히 증가하고 있다. 비구면 Glass렌즈 성형용 코어를 SiC소재로 제작할 경우 성형용 코어의 수명향상, 렌즈 생산원가의 절감 및 코팅 과정의 간소화 등의 다양한 장점을 가지므로 SiC를 이용한 성형용 코어의 나노 정밀도급 초정밀 연삭가공기술의 개발이 필요하다. 본 논문에서는 3 메가픽셀, 2.5배 광학 줌 카메라폰 모듈용 비구면 Glass렌즈 개발을 목적으로 실험계획법을 적용하여 초경합금 성형용 코어의 연삭조건을 규명하였다. 초경합금 비구면 성형용 코어의 초정밀 연삭가공조건 및 결과를 바탕으로 난삭재인 Silicon Cabide(SiC)의 연삭가공조건을 구하고 이를 이용하여 비구면 Glass렌즈 성형용 코어를 초정밀 연삭가공하였다.

• Journal of Korea Game Society
• /
• v.17 no.6
• /
• pp.7-18
• /
• 2017

This year, global IT companies such as Google, Apple, and Facebook launched a mobile augmented reality platform. Existing augmented reality technology required a special device such as AR glass or tango phone, but now it will be easy to experience augmented reality in general Android phone and iPhone. The mobile augmented reality game market, which has been attracting interest since the Pokemon game, is expected to become more active. In this article, we introduce augmented reality platforms technology for mobile augmented reality game and mobile augmented reality games including ETRI prototype centered on user interface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.325-328
• /
• 2002

We developed a high performance 2.2" active matrix OLED display for IMT-2000 mobile phone. Scan and Data driver circuits were integrated on the glass substrate, using low temperature poly-Si(LTPS) TFT CMOS technology. High efficiency EL materials were employed to the panel for low power consumption. Peak luminescence of the panel was higher than 250cd/$m^2$ with power consumption of 200mW.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1027-1028
• /
• 2013

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.76-77
• /
• 2013

스마트폰 화면의 대형화와 테블릿 PC 비중 확대와 더불어 모바일용 터치스크린의 평균 면적이 확대됨에 따라 휴대폰 터치 글라스상의 ITO의 단락을 방지하기 위하여 carbon black을 이용한 스퍼터링 공법을 진행하였으며, 최적 증착 조건 도출 및 기존 인쇄 방식과 대등한 투과도 수치를 확보하였다.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.5
• /
• pp.213-219
• /
• 2011

Recently aspheric lenses are widely used for superpricision optical instruments, such as cellular phone camera modules, digital cameras and optical communication modules. The aspherical lenses are processed using mold core under high temperature compressive forming pressure. It is imperative to develop superhard protective films for the life extension of lens forming mold core. Especially ta-C films with higher $sp^3$ fractions receive attentions for the life extension of lens forming mold and, in turn, the cost reduction of lenses due to their suprior high temperature stability, high hardness and smooth surfaces. In this study ta-C films were processed on WC mold as a function of substrate bias voltage using FVA (Filtered Vacuum Arc) method. The processed films were characterized by Raman spectroscopy and nano-indentation to investigate bonding nature and hardness, respectively. The film with maximun 87% of $sp^3$ fraction was obtained at the substrate bias voltage of -60 V, which was closest to ta-C film. ta-C films showed better high temperature stability by sustaining relatively high fraction of $sp^3$ bonding even after 2,000 glass lens forming applications.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.1
• /
• pp.51-56
• /
• 2009

Recently, with the increasing lightness and miniaturization of high resolution camera phones, the demand for aspheric glass lens has increased because plastic and spherical lens are unable to satisfy the required performance. An aspheric glass lens is fabricated by the high temperature and pressure molding using a tungsten carbide molding core, so precision grinding and coating technology for the molding core surface are required. This study investigates the effect of diamond-like carbon (DLC) and rhenium-iridium (Re-Ir) coating For aspheric molding core surface. The grinding conditions of the tungsten carbide molding core were obtained by design of experiments (DOE) for application in the ultra precision grinding process of the tungsten carbide molding core of the aspheric glass lens used in 5 megapixel, $4{\times}$ zoom camera phone modules. A tungsten carbide molding core was fabricated under this grinding condition and coated with the DLC and Re-Ir coating. By measurements, the effect of DLC and Re-Ir coating on the form accuracy and surface roughness of molding coer was evaluated.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.480-486
• /
• 2006

Generally, IR cut-off filters for mobile phone is coated on the glass substrate at high temperature(above $300^{\circ}C$). In this work, we prepared IR cut-off filters on the poly(methyl methacrylate)(PMMA) substrates at low temperature(about $70^{\circ}C$ ). using the $CeO_2\;and\;SiO_2$ coatings by physical vapor deposition. The surface energies of coated and uncoated PMMA, and adhesive properties of IR cut-off filters coatings were examined using contact angle measurements. We demonstrate the improve of mobile phone optical system using these results.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.2
• /
• pp.105-107
• /
• 2002

a-C:H films were coated on windows of mobile telephone by RF plasma chemical vapor deposition equipment made in our company. Thickness of the coatings is about 0.7 micrometers and they have high hardness, low friction coefficient, good adhesion, high optical transparency and chemical inertness. Knoop hardness of the diamond-like carbon films on glass substrate is 2328 kg/mm$^2$. The adherence between films and substrate is good and shows to be 69 N by scratching test. The optical performance is improved obviously owing to coat the film on it. The index of the coated windows is 2.5, transmission of visible light is larger than 90%, and transmission of ultraviolet light decreases by 30% and the ultraviolet light can be obstructed obviously. The coated glass also has self-clean effect and decontamination ability. The films have hydrophobic character and the soakage angle of water drop is larger than 90 degrees. The windows have fog-proof ability owing to eliminate the capillary phenomena in the inner surface. The physics and chemical properties of the coated windows are steady. Study indicates that the performance of a-C:H coated mobile phone windows are improved notably on wear-resistance, corrosion-proof and optical properties and it is excellent mobile windows protective coatings.