• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 1999.03a
• /
• pp.253-260
• /
• 1999

The recycling cell formation problem means that disposal products are classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences during product use phase and recycling cells are formed design, process and usage attributes. In order to treat the uncertainties, fuzzy set theory and fuzzy logic-based neural network model are applied to recycling cell formation problem for disposal products. In this paper, a heuristic approach for fuzzy ART neural network is suggested. The modified Fuzzy ART neural network is shown that it has a great efficiency and give an extension for systematically generating alternative solutions in the recycling cell formation problem. We present the results of this approach applied to disposal refrigerators and the comparison of performances between other algorithms. This paper introduced a procedure which integrates economic and environmental factors into the disassembly of disposal products for recycling in recycling cells. A qualitative method of disassembly analysis is developed and its aim is to improve the efficiency of the disassembly and to generated an optimal disassembly which maximize profits and minimize environmental impact. Three criteria established to reduce the search space and facilitate recycling opportunities.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.85-95
• /
• 2004

The Purpose of this study was to find a phase of clothing in Korean proverb. The results of the analysis of this research was as follows： In the case of headgear, was expose that symbolize handsomeness, conduct of life, personality that display charm and position which is not usage as only head protection. Upper wear was expressing aspect and person's similarity, and was symbolizing conduct of life by meaning of dress and its ornaments according to a person that dress displays that change. Trousers(bottom wear) was expose that it means aspect or conduct of life(a 4 case, 40％) through site. Overcoat showed that overcoat that is clothes that is symbolizing wearer's situation, aspect and wear most on face because is involved with behavior that is not right in clothes usage is used by standard that foretell personality. Underwear can know that expressed being involved with right behavior, nature by the basic clothes. I was able to know that I express an attitude of a life or a form through shoe, and the accessories won an minor order but that I have a large influence on a character or the appearance of a person. Silk fabrics expresses Position, and hemp cloth expressed by symbol that display ability. Also, silk fabrics had meaning that hint person's background. Dress and its ornaments that is used in proverb by these result can know that have function as symbolic symbol that display Person's nature or situation, aspect that is wearing clothes that is not function as only simple clothes.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.245-254
• /
• 2012

In this study, we introduce a prototype-based classifier with feature selection that dwells upon the usage of a biologically inspired optimization technique of Particle Swarm Optimization (PSO). The design comprises two main phases. In the first phase, PSO selects P % of patterns to be treated as prototypes of c classes. During the second phase, the PSO is instrumental in the formation of a core set of features that constitute a collection of the most meaningful and highly discriminative coordinates of the original feature space. The proposed scheme of feature selection is developed in the wrapper mode with the performance evaluated with the aid of the nearest prototype classifier. The study offers a complete algorithmic framework and demonstrates the effectiveness (quality of solution) and efficiency (computing cost) of the approach when applied to a collection of selected data sets. We also include a comparative study which involves the usage of genetic algorithms (GAs). Numerical experiments show that a suitable selection of prototypes and a substantial reduction of the feature space could be accomplished and the classifier formed in this manner becomes characterized by low classification error. In addition, the advantage of the PSO is quantified in detail by running a number of experiments using Machine Learning datasets.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.223-228
• /
• 2011

In this paper, we proposed a technique to recognize three states in stance phase of gait cycle. Walking assistive devices are used to help the elderly people walk or to monitor walking behavior of the disabled persons. For the effective assistance, they adopt an intelligent sensor system to understand user's current state in walking. There are three states in stance phase; Loading Response, Midstance, and Terminal Stance. We developed a foot pressure sensor using 24 FSRs (Force Sensing/Sensitive Resistors). The foot pressure patterns were integrated through the interpolation of FSR cell array. The pressure patterns were processed to get the trajectories of COM (Center of Mass). Using the trajectories of COM of foot pressure, we can recognize the three states of stance phase. The experimental results show the effective recognition of stance phase and the possibility of usage on the walking assistive device for better control and/or foot pressure monitoring.

• Journal of radiological science and technology
• /
• v.20 no.2
• /
• pp.34-43
• /
• 1997

There are 4 types of equipment in diagnostic radiography. These are single phase, three phase, inverter type and condenser type X-ray generators. It is very confusing to make an adequate exposure factor and to know the usage of different type of X-ray generators. In this experiment, I explored a comparative study of outputs in 4 different type of X-ray units. I expect that this experiment could be helpful for manufacturer to make both the X-ray equipment better, In terms of Ideal exposure factors, thereby reducing the patient dose. Experimental results are as follow : 1) X-ray output The ratio of X-ray output of single, three phase and inverter type of X-ray generator was 1 : 1.6 : 2 without absorber and 1 : 2 : 2.6 with 20 mm aluminium absorber. 2) Beam quality The X-ray beam quality of single phase generator was proved to be softer than three phase and inverter type of generators by 0.4 mmAL and 0.55 mmAl HVL respectively. 3) Reproducibility Linearity of X-ray output Retroducibility of X-ray output met the regulation below CV 0.05 and linearity also met the regulation below 0.1 in 4 types of diagnostic X-ray generators. 4) The comparison of incident dose Three phase X-ray generator was 20% higher than two other X-ray generators in radiation dose to make same film density.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.133-140
• /
• 2009

In the paper, we proposed the systematical and quantitative software risk management methodology based on risk analysis model. A software risk management consists of the basic risk management method(BRIMM) and the detailed risk management method(DRIMM). BRIMM is applied to unimportant phases or the phase which also the risk factor does not heavily influence to project. DRIMM is used from the phase which influences highly in project success or the phase where the risk factor is many. Fulfilling risk management combined two methods, we can reduce project's budget, term and resource's usage, and prevent risk with the optimum measures obtained by the exact risk analysis.

• Journal of Korea Multimedia Society
• /
• v.18 no.6
• /
• pp.710-722
• /
• 2015

Counterfeit products have been a major concern in global market. With the emergence of RFID systems, to detect counterfeit products in supply chain is relatively easy. Many anti-counterfeiting techniques for products attached by RFID tag are proposed. Most of the previous anti-counterfeiting techniques are not considering the distribution of the counterfeit from a customer to a customer. Using the ownership transfer protocols we can prevent the counterfeit from being distributed on the supply chain as well as between the customers and the customers. The ownership transfer protocols must be modified for anti-counterfeiting because of the usage of the protocol. In this paper, we modify the ownership transfer protocol proposed by G. Kapoor and S. Piramuthu[1] to be able to detect the counterfeit and track and trace the products in the supply chain. Our proposed protocol consists of three phases: the products delivery phase, the products takeover phase, and the products sale phase. We show that our protocol is anti-counterfeiting as well as secure against the security attacks.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.366-371
• /
• 2012

In this paper, we propose an electric circuit using one common-arm of H-Bridge inverters to reduce the number of switching components in the multi-level inverter combined with H-Bridge inverters and transformers. And furthermore, we suggested a new multi-level PWM inverter using PWM level to reduce THD (Total Harmonic Distortion). We use a phase-shift switching method that has the same rate of usage at each transformer. Also, we test the proposed prototype 9-level inverter to clarify the proposed electric circuit and reasonableness of the control signal for the proposed multi-level PWM inverter.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.81-87
• /
• 2000

This paper presents an application of forced oscillation technique to measure pitch dynamic stability derivatives of a missile model in the low speed wind tunnel. The missile model is oscillated by D.C. electric servomotor with constant amplitudes and frequencies. Phase shift is determined as the difference of peak values between input and output signals from the dynamic stability balance installed at the center of gravity of the model. Stability derivatives were calculated by using phase shifts, amplitudes, forcing moments and input frequencies. Test results show the proper usage of the force oscillation technique with good damping effects.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.221-222
• /
• 2015

Since the input data such as types and quantities of materials cannot be acquired during the planning and designing phases, it is difficult to estimate the carbon emissions from the construction phase. As the materials are closely related to the building usages, an approximate estimation by the usages can be suggested. However, before confirming the estimation, the difference test among the carbon emissions of the building usages should be implemented. This study executed t-test or Mann-Whitney test between apartments and schools. The result of the study statistically verified the significant difference between the carbon emissions of apartments and schools.