• 한국전자파학회논문지
• /
• 제14권7호
• /
• pp.741-749
• /
• 2003

광섬유의 색 분산과 자기 위상 변조 외에 상호 위상 변조 효과에 의해 왜곡된 WDM 채널 신호가 MSSI (Mid-Span Spectral Inversion) 기법을 통해 보상되는 정도를 다양한 광섬유 분산 계수를 고려하여 분석해 보았다. 본 연구에서 고려된 시스템은 120 Gbps (3$\times$40 Gbps) 강도 변조 직접 검파 방식의 WDM 시스템이다. 또한 전체 전송로의 중간에 비선형 매질로 HNL-DSF(Highly nonlinear dispersion shifted fiber)를 갖는 광 위상 공액기를 두고, 광 위상 공액기를 중심으로 첫 번째 전송 구간에서의 평균 강도와 두 번째 전송 구간에서의 평균 강도를 같게 하는 PAIA(Path Averaged Intensity Approximation) 방식 의 MSSI 기법을 채택한 시스템이다. 채널별 보상 특성의 분석은 1 dB 기준 눈 열림 패널티(Eye Opening Penalty)를 이용했다. 색 분산과 비선형 효과에 의한 채널 신호 왜곡이 유도될 수 있는 장거리 WDM 시스템에 MSSI 기법을 적용하면 전송 거리와 전송 품질을 단일 채널 전송 이상으로 개선시킬 수 있고, 상호 위상 변조에 의한 왜곡의 보상 측면에서 MSSI 기법은 광섬유의 분산 계수가 비교적 큰 WDM 시스템에 더욱 유효하다는 것을 확인할 수 있었다.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1108-1121
• /
• 2019

The non-inverting buck-boost converter (NIBB) is a step-up and step-down DC-DC converter suitable for wide-input-voltage-range applications. However, when the input voltage is close to the output voltage, the NIBB needs to operate in the buck-boost mode, causing a significant efficiency reduction since all four switches operates in the PWM mode. Considering both the current stress limitation and the efficiency optimization, a novel design methodology for the optimal phase-shift modulation of a NIBB in the buck-boost mode is proposed in this paper. Since the four switches in the NIBB form two bridges, the shifted phase between the two bridges can serve as an extra degree of freedom for performance optimization. With general phase-shift modulation, the analytic current expressions for every duty ratio, shifted phase and input voltage are derived. Then with the two key factors in the NIBB, the converter efficiency and the switch current stress, taken into account, an objective function with constraints is derived. By optimizing the derived objective function over the full input voltage range, an offline design methodology for the optimal modulation scheme is proposed for efficiency optimization on the premise of current stress limitation. Finally, the designed optimal modulation scheme is implemented on a DSPs and the design methodology is verified with experimental results on a 300V-1.5kW NIBB prototype.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.192-193
• /
• 2002

In this paper we investigate the phase modulation efficiency in the electrooptic phase modulator using PPpinNN GaAs/AlGaAs W-type waveguide. The phase change is affected by the refractive index change taking place inside the depletion region. The behavior of the modulator can be understood in terms of two electric field-related and two carrier-related effects linear electrooptic, quadratic electrooptic, plasma, and bandgap shift. As a result, the phase modulation efficiency was measured about 34.6($^{\circ}$/V$.$mm) for the TE polarized light. The quadratic electrooptic coefficient R 5.82${\times}$10$\^$-15/($\textrm{cm}^2$/V$^2$) is Obtained ant the Phase efficiency Caused by the quadratic electrooptic effect is about 10 times larger than that from the conventional linear electrooptic effect.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1197-1207
• /
• 2014

Common-mode voltage (CMV) causes overvoltage stress to winding insulation and damages AC motors. CMV with high dv/dt causes leakage currents, which create noise problems for equipment installed near the converter. This study proposes a new pulse-width modulation (PWM) strategy for three-level T-type NPC inverters. This strategy substantially eliminates CMV. The principle for selecting suitable triangle carrier signals for the three-level T-type NPC is described. The proposed method can mitigate the peak value of CMV by 50% compared with the phase disposition pulse-width modulation method. Furthermore, the proposed method exhibits better harmonic spectrum and lower root mean square value for the CMV than those of the reduced-CMV method on the basis of the phase opposition disposition PWM scheme with modulation index higher than 0.5. The proposed modulation can easily be implemented using software without any additional hardware modifications. Both simulation and experimental results demonstrate that the proposed carrier phase-shift PWM method has good output waveform performance and reduces CMV.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.293-304
• /
• 2020

In this paper, various modulation techniques, including the legacy Global Navigation Satellite System (GNSS) signal modulation techniques, are introduced and the spectral characteristics and correlation characteristics of signals with various modulation techniques are analyzed based on numerical simulation. With the development of various GNSS services, the limited frequency band has become increasingly saturated, and issues of interoperability and compatibility have emerged in the new GNSS design. Since the efficient allocation of frequency resources is closely related to spectrum design, modulation techniques are one of the important signal design parameters of new signal design. Signal modulation techniques are closely related to various figure of merits (FoMs) as well as spectrum characteristic, and in some cases there is a complicated trade-off between FoMs. Thus, the FoMs associated with modulation technology should be analyzed and the best signal candidates should be chosen carefully via the trade-off analysis for FoMs. In this paper, we define the modulation technique based on Phase Shift Keying (PSK), Binary Offset Carrier (BOC) and Continuous Phase Modulation (CPM) for the design of KPS signals, and the FoMs of signals in terms of spectrum and correlation function are evaluated. Signals with various modulation techniques are implemented through a numerical simulation, and the relevant FoMs are analyzed.

• 전력전자학회논문지
• /
• 제7권1호
• /
• pp.1-10
• /
• 2002

본 논문에서는 2상 인버터용 공간전압벡터 PW 방식을 제안하였다. 제안된 2상 공간전압벡터 PWM 방식은 2상 유도전동기에 적용할 수 있다. 2상 공간전압벡터 방식을 사용하는 2상 인버터는 4개의 공간 전압벡터를 발생하나 영 전압 벡터는 만들 수 없다. 2상 인버터에서는 4개의 공간 전압벡터를 조정하여 기본 전압벡터를 실현한다. 또한, 2상 공간전압벡터방식에 의해 최적의 PWM 전압파형을 만들기 위한 대칭변조방식이 제안되었다. 제안된 2상 공간 전압벡터방식에 대한 타당성을 확인하기 위해 시뮬레이션과 실험이 실행되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.353-356
• /
• 2011

전파를 수집하고 분석하는 신호수신시스템은 실 운용환경에서 검증되기 전에 정밀한 모의전파신호원을 이용한 정량적인 성능예측 및 실 환경과 유사한 모의전파환경에서 검증되어야한다. 신호수신 시스템은 전파의 주파수(Frequency), 펄스 변조(Pulse Modulation), 스캔 변조(Scan Modulation), 펄스 내 위상변조(Phase Modulation On Pulse), 펄스 내 주파수 변조(Frequency Modulation On Pulse) 등 다양한 신호특성에 대한 측정, 분석능력을 갖는다. 이러한 신호원들은 기본으로 실험실 환경에서 모의발생 되어야 하고 전파가 다수 존재하는 복잡한 전파환경 또한 모의되어야 한다. 본 논문에서는 효과적인 전파신호원의 모의발생, 운용시나리오에 따른 정밀고주파시험신호 모의방법에 관한 연구 결과를 서술한다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.433-445
• /
• 2014

Single phase voltage source converter (VSC) is an important power electronic converter (PEC), including single-phase voltage source inverter (VSI), single-phase voltage source rectifier (VSR), single-phase active power filter (APF) and single-phase grid-connection inverter (GCI). As the fundamental part of large scale PECs, single-phase VSC has a wide range of applications. In the paper, as first, on the basis of the concept of the discontinuous pulse-width modulation (DPWM) for three-phase VSC, a new DPWM of single-phase VSR is presented by means of zero-sequence component injection. Then, the transformation from stationary frame (abc) to rotating frame (dq) is designed after reconstructing the other orthogonal current by means of one order all-pass filter. Finally, the presented DPWM based single-phase VSR is established analyzed and simulated by means of MATLAB/SIMULINK. In addition, the DPWMs presented by D. Grahame Holmes and Thomas Lipo are discussed and simulated in brief. Obviously, the presented DPWM can also be used for single-phase VSI, GCI and APF. The simulation results show the validation of the above modulation algorithm, and the DPWM based single-phase VSR has reduced power loss and increased efficiency.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1119-1129
• /
• 2014

This study proposes a novel five-level three-phase hybrid-clamped converter composed of only six switches and one flying capacitor (FC) per phase. The capacitor-voltage-drift phenomenon of the converter under the classical sinusoidal pulse width modulation (SPWM) strategy is comprehensively analyzed. The average current, which flows into the FC, is a function of power factor and modulation index and does not remain at zero. Thus, a specific modulation strategy based on space vector modulation (SVM) is developed to balance the voltage of DC-link and FCs by injecting a common-mode voltage. This strategy applies the five-segment method to synthesize the voltage vector, such that switching losses are reduced while optional vector sequences are increased. The best vector sequence is then selected on the basis of the minimized cost function to suppress the divergence of the capacitor voltage. This study further proposes a startup method that charges the DC-link and FCs without any additional circuits. Simulation and experimental results verify the validity of the proposed converter, modulation strategy, and precharge method.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.739-750
• /
• 2004

In case while M(modulation index) is more than 0.7, the spectrum of motor voltage and current of a conventional two-phase SRP-PWM scheme are not reduced considerably. To solve the problems of a conventional two-phase SRP-PWM, this paper proposes a two-phase SRP-PWM(DZSRP-PWM) with double zero vector mode which zero vector is selected as V(111) in case of M >0.7, and zero vector is selected as V(000) if M < 0.7. For the validity of the proposed method, the PSIM simulations and experiments were achieved. And the simulation and experiment results show that the voltage and current harmonics all over the modulation index are spread to a wide band area.