• Computers and Concrete
• /
• 제24권6호
• /
• pp.499-511
• /
• 2019

In this paper, wave propagation of double-bonded Cooper-Naghdi micro sandwich cylindrical shells with porous core and carbon nanotube reinforced composite (CNTRC) face sheets are investigated subjected to multi-physical loadings with temperature dependent material properties. The governing equations of motion are derived by Hamilton's principle. Then, the influences of various parameters such as wave number, CNT volume fraction, temperature change, Skempton coefficient, material length scale parameter, porosity coefficient on the phase velocity of double-bonded micro sandwich shell are taken into account. It is seen that by increasing of Skempton coefficient, the phase velocity decreases for higher wave number and the results become approximately the constant. Also, by increasing of the material length scale parameter, the cut of frequency increases, because the stiffness of micro structure increases. The obtained results for this article can be used to detect, locate and quantify crack.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 춘계학술대회논문집
• /
• pp.301-306
• /
• 1996

Different patterns of dynamic trunk performance between normal subjects and low-back pain (LBP) patients have been investigated. Ten healthy subjects and ten LBP patients were recruited for this study. An experiment was designed to quantify the dynamic motion of the back and hip during repetitive flexion/extension of the trunk. The angular velocity, angular acceleration and the phase angle difference between the hip and back were recorded as dependent measures via electro- mechanical devices. Results showed the significant differences in the velocity and acceleration of the hip and back and the phase angle between normal subjects and LBP patients. The consistency of kinematic variables during motion cycles was also examined in terms of variance ratio (Hershler and Milner, 1978). Based on the results of the study, these quantifiable variables such as trunk kinematics and hip-spine coordination can be developed as a medical tool to identify LBP patients in addition to current imaging techniques.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.341-346
• /
• 2004

Motion of a bubble inside narrow tube is numerically studied. The numerical code assumes axi-symmetric incompressible flow field. The surface of the bubble is captured by VOF (Volume Of Fluid) method, and it is advected by MARS (Multiphase Advection and Reconstruction Scheme). Air bubble inside water is first studied, and it was found that a strong vortex, which is induced by the pressure difference caused by the surface tension, is formed at the rear part of the bubble. Then flow parameters are parametrically varied to understand the correlation between the bubble shape, the bubble velocity, and the flow parameters. The parametric study revealed that the aspect ratio of the bubble mainly depends on We number, and the oscillation of the bubble speeds is dependent on Re number.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.179-182
• /
• 2004

This study reports the extraction behavior of $\alpha$-lactalbumin using bis(2-ethylhexyl) sulfosuccinate sodium (AOT) reverse micelles. Forward extraction of $\alpha$-lactalbumin in the reverse micellar organic phase from aqueous feed solutions was strongly dependent on the AOT concentration and the complete forward extraction of 0.03 mM $\alpha$-lactalbumin was successfully achieved at an AOT concentration of ca. 100 mM. A similar dependency of the forward extraction on the AOT concentration was obtained in isooctane, n-hexane, and n-octane systems. In the backward extraction from the micellar organic phase, the recovery of the protein as high as ca. 90% was obtained with pH control and/or salt addition.

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.97-100
• /
• 1998

We have investigated the effects of crystalline activation on solid phase crystallization (SPC) of amorphous silicon (a-Si) thin films. Wet blasting and self ion implantation were employed as the activation treatments to induce macro or micro crystalline damages on deposited a-Si films. Low temperature and larger grain crystallization were obtained by the applied two-step activation. High degree of crystallinity was also observed on both furnace and rapid SPC. crystalline activations showed the promotion of nucleation on the activated regions and the retardation of growth in an amorphous matrix in SPC. The observed behavior of two-step SPC was strongly dependent on the applied activation and annealing processes. It was also found that the diversified effects by macro and micro activations on the SPC were virtually diminished as the annealing temperature increased.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.84-90
• /
• 1999

The shape of weld nuggest in arc spot welding of 304 stainless steel was found by searching thermal history of a weld joint through a three-dimensional finite element model. The problem consists of one in which the finite element mesh is growing continuously in time in order to accomodate metal transfer in arc spot welding using element rebirth technique. The analysis was performed on the basis of experimental results. The finite element program MARC, along with a few user subroutines, was employed to obtain the numerical results. Temperature-dependent thermal properties, stir effect in weld pool, effect of phase transformation, and the convective and radiative boundary conditions are included in the model. Numerically predicted shape of weld nuggest is compared with the experimentally observed shape.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.7-12
• /
• 2008

A far field solution of the slowly varying force on an offshore structure by gravity ocean waves was shown as a function of the reflection and transmission of the body disturbed waves. The solution was obtained from the conservation of the momentum flux, which simply describes various wave forces, while making it unnecessary to compute complicated integration over a control surface. The solution was based on the assumption that the frequency difference of the bichromatic incident waves is small and its second order term is negligible. The final solution is expressed in term of the reflection and transmission waves, i.e. their amplitudes and phase angles. Consequently, it shows that not only the amplitudes but also the phase differences make critical contributions to the slowly varying force. In a limiting case, the slowly varying force solution gives the one of the mean drift force, which is only dependent on the reflection wave amplitude. An approximation is also suggested in a case where only the mean drift force information is available.

• Bulletin of the Korean Chemical Society
• /
• 제21권11호
• /
• pp.1071-1076
• /
• 2000

Temperature dependent data of 13C spin-lattice relaxation times and NOE factors for methylene carbons at 50.3MHz and 125.5 MHz have been used to probe the local chain dynamics of poly(butylene terephthalate) (PBT) in solution phase. The interpretation of the relaxation data for methylene chain carbons in PBT was attempted on the basis of several proposed motional models, among which the DLM model was found to be superior. Analysis based on the DLM model indicated that the motion of the $OCH_2groups$ was more restricted compared with the central methylene carbon, which is consistent with conclusions from solid state experiments reported by other investigators. Librational amplitudes of terminal and central carbon of PBT were estimated to be $29.84^{\circ}$ and $32.01^{\circ}respectively.

• Earthquakes and Structures
• /
• 제10권3호
• /
• pp.681-697
• /
• 2016

The model of two-temperature magneto-thermoelasticity for a non-simple variable-thermal-conductivity infinitely-long solid cylinder is established. The present cylinder is made of an isotropic homogeneous thermoelastic material and its bounding plane is traction-free and subjected to a time-dependent temperature. An exact solution is firstly obtained in Laplace transform space to obtain the displacement, incremental temperature, and thermal stresses. The inversion of Laplace transforms has been carried out numerically since the response is of more interest in the transient state. A detailed analysis of the effects of phase-lags, an angular frequency of thermal vibration and the variability of thermal conductivity parameter on the field quantities is presented.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.1-11
• /
• 2000

This study investigates the problem of phase change from liquid to solid in the inviscid stagnation flow. The solution of dimensionless governing equations is determined by the three dimensionless parameters of (temperature ratio/conductivity ratio), Stefan number, and diffusi-vity ratio. The solution at the initial stage of freezing is obtained by expanding it in powers of time, and the final equilibrium state is determined from the steady-state governing equations. The equilibrium state is dependent on (temperature ratio/conductivity ratio), but is independent of Stefan number and diffusivity ratio. The effect of fluid flow on the pure conduction problem can be clearly seen from the solution of the initial stage and the final equilibrium state, and the characteristics of the solidification process for all the dimensionless parameters are elucidated.