• 한국음향학회지
• /
• 제27권7호
• /
• pp.342-349
• /
• 2008

수중통신 시 다중 음파 경로의 생성은 명확한 메시지전송을 어렵게하는 원인중 하나이다. 본 논문에서는 이러한 문제점의 해결을 위하여 각기 다른 경로에 따라 형성된 다중 경로간의 지연 시간을 계산하여 변조주파수변환구간을 생성하는 방법을 제안하였다. 송신단에서는 생성된 변조주파수변환구간의 크기에 따라 메시지를 분할하여 두 개의 주파수를 사용하여 QPSK(Quadrature Phase Shift Keying)방식을 교대로 호핑하여 메시지를 전송 하였다. 이에 대응하여 수신단에서는 수신된 메시지를 알고리즘 설계 시 구축한 프로토콜에 의하여 복조하여 원신호로 복원하는 적응 BISMO 알고리즘을 제안 하였고 모의실험을 통하여 적응적 변조주파수변환구간, 추정 오류율을 계산하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.926-929
• /
• 2005

Recently, laser interferometer is widely used as a measuring system in many fields because of its high resolution and its ability to measure a board area in real-time ail at once. In conventional laser interferometer, for examples Out of plane ESPI, In plane ESPI, Shearography and Holography, it uses PZT or other components as a phase shift instrumentation to extract 3-D deformation data, vibration mode and others. However, in most cases PZT has some disadvantages, which include noli-linear errors and limited time of use. In present study, a new type of laser interferometer using a laser diode(LD) is proposed. Using Laser Diode Sinusoidal Phase Modulating(LD-SPM) interferometer, the phase modulation can be directly modulated by controlling the LD injection current thereby eliminating the need for PZT components.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.111-117
• /
• 2003

In the design of the split type free displacer Stilting cryocooler the motion of the displacer is very important to decide the cooling capacity, which depends upon the working gas pressure, the swept volume in the compression space and the expansion space, operating frequency, the phase shift between piston and displacer, etc. In this study, Stirling cryocooler actuated by the electric farce of the dual linear motor is designed and manufactured. Cool down characteristics of the cold end with laser displacement sensor in the expander of the Stilting cryocooler is evaluated. The charging pressure was 15kg$_{f}$/$\textrm{cm}^2$ and operating frequency was 50Hz. Input power and the lowest temperature were about 32W and 67K, respectively. And, displacement of the piston is measured by LVDTs (Linear Variable Differential Transformers), displacement of thedisplacer is measured by laser optic method, and phase shift between piston and displacer is discussed. As the peak-to-peak pressure of the compressor was increased, peak-to-peak displacement of the displacer was increased. The peak-to-peak displacement of the displacer increases in the range of 0 - 64.5Hz(resonant frequency of the displacer), but decreases steeply when the operating frequency is bigger than the resonant frequency. Finally when the phase shift between displacements of the Piston and displacer is 45。, operating frequency is optimum and is decided by resonant frequency of the expander, mass and cross section area of the displacer and constant by friction and flow resistance.e.

• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.295-308
• /
• 2018

The excavation of twin tunnels is a process that destabilizes the ground. The stability of the tunnel lining, the control of ground displacements around the tunnel resulting from each excavation and the interaction between them must be controlled. This paper provides a new approach for replacing the costly 3D analyses with the equivalent 2D analyses that closely reflects the in-situ measurements when excavating twin tunnels. The modeling was performed in two dimensions using the FLAC2D finite difference code. The three-dimensional effect of excavation is taken into account through the deconfinement rate ${\lambda}$ of the soil surrounding the excavation by applying the convergence-confinement method. A comparison between settlements derived by the proposed 2D analysis and the settlements measured in a real project in Algeria shows an acceptable agreement. Also, this paper reports the investigation into the changes in deformations on tunnel linings and surface settlements which may be expected if the twin tunnels of T4 El-Harouche Skikda were constructed with a tunneling machine. Special attention was paid to the influence of the excavation phase shift distance between the two mechanized tunnel faces. It is revealed that the ground movements and the lining deformations during tunnel excavation depend on the distance between the tunnels' axis and the excavation phase shift.

• 전력전자학회논문지
• /
• 제27권3호
• /
• pp.256-264
• /
• 2022

The frequency power control method (FCM) which has a wide operating frequency range is adopted for induction heating (IH) cooktops. When FCM is applied to the full-bridge series resonant converter (FB-SRC) based IH system, high-frequency switching of the inverter is required compared to the half-bridge SRC (HB-SRC)-based IH system. Therefore, the switching loss of the inverter increases, and applying FCM under the condition that the inverter operating frequency range is limited is difficult. Therefore, this paper proposes a control strategy with the phase shift power control method considering that limited frequency conditions are presented. Loss analysis following the control method is performed through simulation and mathematical analysis. In addition, the validity of the proposed control strategy is verified by analyzing the heating performance following the control method through the test results of the 3,200[W] prototype.

• Journal of electromagnetic engineering and science
• /
• 제5권1호
• /
• pp.26-30
• /
• 2005

It is important to know phase offsets of PN(Pseudo Noise) sequences in spread spectrum communications since the acquisition is equivalent to making a phase offset between a receiving PN sequence and a PN sequence of local PN generator be identical. In this paper, a phase offset enumeration method for PN sequences with error detection, and its application to the synchronization are proposed. The phase offset enumeration for an n-tuple PN sequence and its error detection are performed when one period of the sequence is received. Once the phase offset of the receiving sequence is calculated, we can easily accomplish the synchronization by initializing shift registers of a local PN generator according to the phase offset value. The mean acquisition time performance of the proposed scheme was derived analytically. Since this synchronization scheme can be realized by using simple circuit and acquires very rapid acquisition in high SNR but shows performance degradation in low SNR, it can be especially useful in indoor and office environments.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.530-539
• /
• 2013

In large vessels, proper water level must be maintained with a balance for right and left equilibrium by absorbing or draining sea water in ballast water tank. However, this ship's ballast-water can be drained marine organisms to local sea area by world trade and this can be a source of ecological disturb. In order to solve these problems, marine organisms must be removed in accordance with the international covenant for the emission of microorganisms. By this reason, the seawater electrolysis rectifier of low-voltage high-current rectifiers with excellent ability for microbial treatment is required. In this paper, PSFB converter will be discussed for the seawater electrolysis rectifier. Furthermore, a new output control method with the power limit operation under the limited maximum voltage condition is proposed for this rectifier. The simulation for the proposed current control method for PSFB Converter is shown using MATLAB/SIMULINK. Finally the usefulness of the proposed control method is presented by the experimental results.

• 대한전자공학회논문지SP
• /
• 제47권1호
• /
• pp.103-119
• /
• 2010

본 논문에서는 원 영상에서 특정한 국부 영역을 선택하고 선택된 국부 영역에 반복적인 위상 상관도를 수행함으로써 잡음을 가지고 있는 영상에서 정확한 부화소(subpixel) 이동량을 추정하는 방법을 제안한다. 기존의 방법은 영상 전체를 이용해 위상 상관도를 수행 한 후 포물선, sinc 같은 함수 보간을 통해 간접적으로 부화소 이동량을 추정하였다. 이 같은 추정방법은 정확하나 백색 가우시안 잡음(additive white gaussian noise)이나 에일리어싱(aliasing)과 같은 잡음이 영상에 존재하면 정확한 부화소 이동량 추정이 어렵다. 그래서 영상 전체를 이용하기 보다는 잡음이 적은 국부 영역을 선택하여 이를 이용해 위상 상관도를 수행하고 부화소 이동량을 계산할 때 기존의 함수의 보간을 사용하기 않고 반복적으로 위상 상관도를 수행함으로써 잡음에 강한 부화소 이동량을 추정 방법을 제안하였다. 또한 위상 상관도 함수의 분석을 통해 위상 상관도 반복횟수를 줄이는 방법도 제안하였다. 실험을 통해 제안한 방법과 기존의 방법으로 추정한 부화소 이동량의 오차를 비교하고 초해상도 영상을 만들어 봄으로써 제안한 방법이 잡음이 있는 조건에서 더 정확한 부화소 이동량 추정성능을 보여줌을 알 수 있었다.

• 한국항행학회논문지
• /
• 제10권3호
• /
• pp.235-249
• /
• 2006

본 논문에서는 디지털 통신 시스템의 국부발진기의 다양한 주파수 오프셋에서 QPSK(Quadrature Phase Shift Keying), MQAM(M-ary Quadrature Amplitude Modulation), OFDM(Orthogonal Frequency Division Multiplex)-MQAM, OFDM-QPSK, 8-VSB(Vestigial Side Bands) 변조방식에 대한 SER(Symbol Error Rate)의 변화와 위상잡음으로 인해 SER에 미치는 영향을 일반화하여 도출하고 시뮬레이션을 통하여 위상잡음이 없는 이상적인 경우와 비교하였다. 또한 상기 변조방식에 대하여 심벌레이트와 변조 대역폭간의 비 그리고 국부발진기의 다양한 오프셋에서도 SER을 분석하였다. 본 연구를 통하여 위상잡음에 대해 가장 민감한 변조방식은 OFDM-MQAM으로, 상대적으로 민감도가 가장 낮은 변조는 8-VSB임을 확인하였다.

• 한국전자파학회논문지
• /
• 제14권5호
• /
• pp.521-526
• /
• 2003

본 논문에서는 Ka-band에 대한 반사형 아날로그 위상변화기의 설계 및 제작결과를 기술하였다. 큰 위상 변화를 가지기 위해서 병렬의 GaAs hyperabrupt junction 바랙터 다이오드와 리액턴스 정합 방법을 사용하였으며 이론적인 설계공식도 도출하였다. Ka-band에서는 조립과정도 중요하며 조립과정중 발생할 수 있는 기생성분을 최소화하기 위한 조립절차도 포함하였다. 제작결과는 Ka-Band에서 기존 것보다 큰 220$^{\circ}$$\pm$7$^{\circ}$ 가변의 위상변화와 삽입손실이 5 dB$\pm$1 dB를 가진 우수한 성능의 측정된 결과를 얻었다.