• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.188-193
• /
• 2022

The Korean mint (Agastache rugosa Kuntze) is used as a leaf vegetable. Therefore, it is important to improve the quality and quantity of leaves by maintaining vegetative growth. When the development of a plant is switched from vegetative to reproductive growth, leaf development may be lowered, leading to a decrease in marketability. Therefore, this study was conducted to investigate the effect of the photoperiod on the flowering characteristics and inflorescence development of the Korean mint to select an appropriate photoperiod for leaf production. The seeds were sown in 105-cell trays on 29 November 2021, and planted in each pot on 27 December 2021, when four main leaves appeared. After planting, the light/dark period was adjusted to 10/14hrs, 12/12hrs, 14/10hrs, 16/8hrs. After 19 days of planting, the first flowering occurred in 10/14hrs, which had a short photoperiod, and the 12/12hrs had 20 days for flowering, and other treatments had 21 days. In addition, it was confirmed that the Korean mint has the characteristics of facultative quantitative short-day plant, through the increase in the development of inflorescences as the light period is shorter than the dark period. As for the growth of Korean mint, the longer the photoperiod, the higher values were shown with leaf length, number of leaves, fresh weight, dry weight, and leaf area of the shoot. Therefore, it is considered that 14 h or more light period is suitable for increasing the productivity of Korean mint as a leafy vegetable.

• Composites Research
• /
• v.36 no.1
• /
• pp.16-24
• /
• 2023

This paper presents a multi-scale progressive fatigue damage model incorporating the model for interfacial debonding between fibers and matrix. The micromechanics model for the progressive interface debonding was adopted, which defined the four different interface phases: (1) perfectly bonded fibers; (2) mild imperfect interface; (3) severe imperfect interface; and (4) completely debonded fibers. As the number of cycles increases, the progressive transition from the perfectly bonded state to the completely debonded fiber state occurs. Eshelby's tensor for each imperfect state is calculated by the linear spring model for a damaged interface, and effective elastic properties are obtained using the multi-phase homogenization method. The fatigue damage evolution formulas for fiber, matrix and interface were proposed to demonstrate the fatigue behavior of CFRP laminates under cyclic loading. The material parameters for the fiber/matrix fatigue damage were characterized using the chaotic firefly algorithm. The model was implemented into the UMAT subroutine of ABAQUS, and successfully validated with flat-bar UD laminate specimens ([0]₈,[90]₈, [30]₁₆) of AS4/3501-6 graphite/epoxy composite.

• Clean Technology
• /
• v.29 no.3
• /
• pp.163-171
• /
• 2023

Hydrogen has been gaining a lot of attention as a possible clean energy source that can aid in reaching carbon neutrality. Currently, hydrogen production has relied on the steam reforming of fossil fuels. However, due to the carbon dioxide emissions caused by this process, hydrogen production based on the steam reforming of bio-oil derived from biomass has been proposed as an alternative approach. In order to use this alternative approach efficiently, one of the key issues that must be overcome is that the complexity of bio-oil, which has a large molecular weight and diverse functional groups of hydrocarbons, promotes the catalytic deactivation of nickel-based catalysts. In this review, research efforts to improve nickel-based catalysts for the steam reforming of bio-oil have been discussed in terms of the active phase, support, and promoters. The active phases are involved in activating C-C and C-H bonds of high-molecular-weight hydrocarbons, and noble and transition metals can be utilized. In terms of the support and promoters, the catalytic deactivation of Ni-based catalysts can be inhibited by utilizing reactive lattice oxygen for support or by suppressing the acidity. The development of active and stable Ni-based reforming catalysts plays a critical role in clean hydrogen production based on bio-oils.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.285-290
• /
• 2023

Poly-lactic acid (PLA) is the most promising polymer in additive manufacturing as an alternative to acrylonitrile butadiene styrene (ABS). Since it is produced from renewable resources such as corn starch and sugar beets, it is also biocompatible and biodegradable. However, PLA has a couple of issues that limit its use. First, it has a comparatively low glass transition temperature of around 60 ℃, such that it exhibits low thermal resistance. Second, PLA has low impact strength because it is brittle. Due to these problems, scientists have found methods to improve the crystallinity and ductility of PLA. Polyethylene glycol (PEG) is one of the most studied plasticizers for PLA to give it chain mobility. However, the blend of PLA and PEG becomes unstable, and phase separation occurs even at room temperature as PEG is self-crystallized. Thus, it is necessary to investigate the optimal mixing ratio of PLA-PEG at the molecular scale. In this study, molecular dynamics will be conducted with various ratios of L-type PLA (PLLA) or DL-type PLA-PEG (PDLA-PEG) systems by using BIOVIA Materials Studio.

• Women's Health Nursing
• /
• v.29 no.2
• /
• pp.137-145
• /
• 2023

Purpose: This non-randomized study was performed to evaluate the effects of music therapy on labor pain, the childbirth experience, and self-esteem in women during vaginal delivery. Methods: In total, 136 primiparous women over 37 weeks of gestation receiving epidural analgesia during vaginal delivery were recruited via convenience sampling. To minimize diffusion effects, data from the control group (n=71) were collected first (April 2020 to March 2021), followed by data from the music group (n=65; April 2021 to May 2022). Participants in the music group listened to classical music during labor, while the control group was offered usual care (no music). Labor pain was measured using a numeric rating scale (NRS), and self-esteem and childbirth experience were collected using self-report questionnaires. Data were analyzed using the independent t-test, chi-square test and Cronbach's α coefficients. Results: The overall pain level (NRS) at baseline was 0 in both groups. Mothers in the music therapy group had lower levels of latent pain (t=1.95, p=.005), active pain (t=3.69, p<.001) and transition-phase pain (t=7.07, p<.001) than the control group. A significant difference was observed between the two groups, and the music therapy group expressed more positive perceptions of the childbirth experience (t=-1.36, p=.018). For self-esteem, the experimental group's score was slightly higher, but without a statistically significant difference from the control group. Conclusion: Using music therapy during labor decreased labor pain and improved the childbirth experience. Music therapy can be clinically recommended as a non-pharmacological, safe, and easy method for nursing care in labor.

• Elastomers and Composites
• /
• v.37 no.4
• /
• pp.244-257
• /
• 2002

A thermotropic liquid crystalline polymer(TLCP) which has flexible butylene/hexylene spacers in the main chain and a triad aromatic ester type mesogenic unit containing a naphthyl group was prepared by solution polycondensation. The in-situ composites based on poly(ethylene 2,6-naphthalate) (PEN) and a thermotropic liquid crystalline polymer(TLCP) were prepared and melt spun at different TLCP contents and different draw ratios to produce monofilaments. Blends of the TLCP with PEN were investigated in terms of thermal, mechanical properties and morphology. The TLCP synthesized showed nematic mesophasic behavior and its transition temperature to isotropic melt from mesophase was 249℃. The blends showed well dispersed TLCP phases in the PEN matrix without macroscopic phase separation. Inclusion of TLCP in the blends decreased the cold crystallization temperature of PEN in the blend, therefore, the TLCP acts as a nucleating agent in the blend and showed good interfacial adhesion between the dispersed LCP phases and PEN matrix with domain sizes 40~50 nm in diameter and well developed fibrillation in the monofilaments. The TLCP acted effectively as a reinforcing material in the PEN matrix at the 10wt% level, it led to an increase of initial modulus up to 270% and tensile strength by 235%, while the elongation rate increasing with higher draw ratios.

• Biomolecules & Therapeutics
• /
• v.32 no.1
• /
• pp.123-135
• /
• 2024

Although gemcitabine-based regimens are widely used as an effective treatment for pancreatic cancer, acquired resistance to gemcitabine has become an increasingly common problem. Therefore, a novel therapeutic strategy to treat gemcitabine-resistant pancreatic cancer is urgently required. Piceamycin has been reported to exhibit antiproliferative activity against various cancer cells; however, its underlying molecular mechanism for anticancer activity in pancreatic cancer cells remains unexplored. Therefore, the present study evaluated the antiproliferation activity of piceamycin in a gemcitabine-resistant pancreatic cancer cell line and patient-derived pancreatic cancer organoids. Piceamycin effectively inhibited the proliferation and suppressed the expression of alpha-actinin-4, a gene that plays a pivotal role in tumorigenesis and metastasis of various cancers, in gemcitabine-resistant cells. Long-term exposure to piceamycin induced cell cycle arrest at the G₀/G₁ phase and caused apoptosis. Piceamycin also inhibited the invasion and migration of gemcitabine-resistant cells by modulating focal adhesion and epithelial-mesenchymal transition biomarkers. Moreover, the combination of piceamycin and gemcitabine exhibited a synergistic antiproliferative activity in gemcitabine-resistant cells. Piceamycin also effectively inhibited patient-derived pancreatic cancer organoid growth and induced apoptosis in the organoids. Taken together, these findings demonstrate that piceamycin may be an effective agent for overcoming gemcitabine resistance in pancreatic cancer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.297-303
• /
• 2024

In this study, KTN heterolayer thin films were fabricated by alternately stacking films of K(Ta_0.70Nb_0.30)O₃ and K(Ta_0.55Nb_0.45)O₃ synthesized using the sol-gel method. The sintering temperature and time were 750℃ and 1 hour, respectively. All specimens exhibited a polycrystalline pseudo-cubic crystal structure, with a lattice constant of approximately 0.398 nm. The average grain size was around 130~150 nm, indicating relatively uniform sizes regardless of the number of coatings. The average thickness of a single-coated film was approximately 70 nm. The phase transition temperature of the KTN heterolayer films was found to be approximately 8~12℃. Moreover, the 6-coated KTN heterolayer film displayed an excellent dielectric constant of about 11,000. As the number of coatings increased, and consequently the film thickness, the remanent polarization increased, while the coercive field decreased. The 6-coated KTN heterolayer film exhibited a remanent polarization and coercive field of 11.4 μC/cm² and 69.3 kV/cm at room temperature, respectively. ΔT showed the highest value at a temperature slightly above the Curie temperature, and for the 6-coated KTN heterolayer film, the ΔT and ΔT/ΔE were approximately 1.93 K and 0.128×10^-6 K·m/V around 40℃, respectively.

• Research in Community and Public Health Nursing
• /
• v.13 no.2
• /
• pp.205-215
• /
• 2002

Objectives: This study was designed to develop and evaluate a stage matched exercise intervention program to effectively increase exercise behaviors in urban elders. Methods: The study included three phases: preliminary descriptive data collection, program development, and program evaluation. The data for the preliminary descriptive phase were collected between May and June 2001. The study participants were 89 urban elders who responded a questionnaire that included general characteristics, exercise related experiences, stage, and process of change in exercise behaviors. Data were analyzed using descriptive statistics, $x^2$-test, and content analysis. Development of the program was based on the preliminary data. and a literature review, and was guided by the tran theoretical model. It consisted of strategies to facilitate the process of changes used in each stage. Evaluation of the program was achieved from October to December 2001, using a case study method, in which eight urban female elders participated. Interviews were conducted on a weekly basis in the form of either an individual interview, or group discussion. Each elder subject received education in accordance with the program strategies and education materials. In the case that a subject's stage of change moved into another one, the scores for the process of change were re-measured. The data were analyzed using the content analysis technique. Results: The results were as follows: 1. Elders who participated in the preliminary data collection phase were over 75 years of age, and the majority of them were women. They had a higher educational level, and fewer number of illnesses than the subjects in other studies. Their stage of change was divided into pre-contemplation and maintenance. The social liberation scores were the highest across all stages of change. There was no difference between men and women on scores for processes of change in each stage. 2. The stage matched exercise intervention program that was developed in this study consisted of one counseling type program and three distinguished educational booklet materials. 3. The results of the case studies are as follows: 1) The study participants were 8 women between 75 and 87 years of age. At the first interviews, all of them were in the pre-contemplation stage. All of them reached the action stage before the 7th week. The scores for processes of change that were the focus in each stage increased more than the scores for other processes of change. During the early stages of change, experimental processes increased more than behavioral processes. However. this pattern was reversed during later stages of change. 2) Characteristics of the subjects in each stage were identical as presented at the tran theoretical model. The intervention strategies were effective in the transition occurred in any stage. 3) Barriers for exercise included unwillingness to exercise, fatigue, shortness of breath, and pain. Ways to overcome these barriers were 'learning an alternative exercise method that can be done at home', 'self-promising/ exercise-promising', and 'use of cues to exercise'. 4) The factors that affected the application of the program were consideration of age and personal preference in selecting an exercise pattern, individualized intervention, and use of education materials appropriate to elders. Women over 80 years of age preferred muscle strengthening and stretching exercise, because they can be easily done at home. They also preferred individualized interventions, materials that were easy to read, and education contents appropriate for elders. Conclusion: In conclusion, the stage matched exercise intervention program that considered the characteristics of the elders was effective to facilitate exercise behaviors of the elders.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.