• 제목/요약/키워드: Phase screen

검색결과 216건 처리시간 0.032초

방사형집수정의 수평집수관에서 지질특성과 취수량의 상관관계 분석 (Analysis of the Correlation between Geological Characteristics and Water Withdrawals in the Laterals of Radial Collector Well)

  • 김태형;정재훈;김민;오세형;이재성
    • 지질공학
    • /
    • 제24권2호
    • /
    • pp.201-215
    • /
    • 2014
  • 본 연구에서는 창원시 강변여과수 개발사업(2단계)에서 얻어진 자료들을 이용하여 대수층의 수리전도도와 방사형집수정의 수평집수관에서 산출되는 유량과의 상관관계를 규명하고자 하였다. 연구지역인 낙동강 중하류 모래자갈층에서 수평적으로 채취한 미고결 퇴적물의 시료를 이용하여 경험식에 의한 수리전도도를 산정하였다. 여러 경험식을 이용하여 연구지역에서 수리전도도를 산정한 결과, Beyer식에 의한 수리전도도가 가장 적합한 것으로 판정되었다. 산정된 수리전도도는 0.083 ~ 0.264 cm/s의 범위, 평균 0.159 cm/s로 나타내고 있어 연구지역의 대수층 특성은 모래자갈층에 투수성이 양호한 것으로 나타났다. 산정된 수리전도도와 실측자료에 의한 스크린 내 지하수의 유입속도 및 유량과의 상관관계를 분석하고자 회귀분석을 실시하였다. 회귀분석 결과, 수리전도도와 지하수의 유입속도 및 유량은 약 72 %의 높은 상관관계를 가지는 것으로 나타났고, 각 변수들 간에 실측자료와의 검증에서도 약 72 %가 일치하는 것으로 분석되어 선형 회귀식은 높은 적합성을 나타내었다. 본 연구의 결과로서 선형 회귀식을 이용하여 수리전도도에 의한 방사형집수정의 수평집수관에서 산출되는 유량의 추정이 가능하고, 연구지역과 유사한 대수층에서 적용이 가능할 것이라고 사료된다.

웹기반 GIS 플랫폼 상 가시화 처리를 위한 대용량 BIM 데이터의 경량화 알고리즘 제시 (A Study on Light-weight Algorithm of Large scale BIM data for Visualization on Web based GIS Platform)

  • 김지은;홍창희
    • Spatial Information Research
    • /
    • 제23권1호
    • /
    • pp.41-48
    • /
    • 2015
  • BIM 기술은 기존 2D 기반 도면처리에서 나아가 3D 모델링을 통한 시설물의 전 생애주기에 발생하는 데이터를 포함한다. 이러한 특성상 하나의 건물은 그 데이터의 방대한 양으로 엄청난 크기의 파일을 생산한다. 대표 표준포맷인 IFC가 그 예로, 객체 기반의 형상정보 및 속성정보를 기반으로 상당한 데이터를 포함한 대용량 처리에 대한 이슈가 종종 발생하고 있다. 이는 렌더링 속도를 증가시키고, 그래픽 카드 용량을 많이 차지하기 때문에, 화면 가시화 측면에서 비효율적이다. 대용량 데이터의 경량화 문제는 프로그램의 프로세스와 품질 측면에서 필수적으로 해결되어야 한다. 본 연구는 국내 및 해외 연구사례에서 경량화에 관련된 다양한 시도를 확인하였다. 이를 기반으로 대용량 BIM 데이터를 효과적으로 컨트롤하고 가시화하기 위해, BIM 특성을 고려하여 최대한 활용할 수 있는 데이터의 경량화 기법을 제안하고 검증하였다. 이는 웹 기반 GIS 플랫폼 상에서 대용량 시설물 데이터를 운용하는데, 최적의 시설물 유형을 분석하고 객체 기반의 IFC 특성을 최대한 활용하여 사용자 측면에서 화면전환의 품질을 확보하고 프로세스 측면에서 효과적인 메모리 운영을 확인하였다.

HPTLC와 GC/MS를 이용한 의약품의 데이타베이스화 및 생체시료에의 응용 (Constructing Database for Drugs and its Application to Biological Sample by HPTLC and GC/MS)

  • 유영찬;박성우;임미애;백승경;박세연;이주선;노동석
    • 분석과학
    • /
    • 제13권2호
    • /
    • pp.136-150
    • /
    • 2000
  • 생체시료에서 미지 의약품의 검출을 위하여, 민감하고 선택적인 박층크로마토그래피인 자동화 점적기 및 자외선 스펙트럼 검출기를 장착한 고성능박층크로마토그라피(HPTLC)를 시도하였다. 205종의 의약품에 대한 Rf값과 자외선흡수스펙트럼(scan 200-360 nm)을 이용하여 HPTLC 데이터베이스를 구축하였으며, 또한 96종의 의약품에 대하여는 리도카인에 대한 상대적 머무름시간(relative retention time; RRT) 및 질량스펙트럼을 이용하여 GC/MS 데이터베이스를 구축하였다. 생체시료중 의약품성분은 고상추출법(Clean Screen ZSDAU020)으로 추출한 후, 이들 시료들을 HPTLC 및 GC/MS 데이터베이스에 적용시켜 검색한 결과 90% 이상의 매우 양호한 일치율로 검색할 수 있었으며, 이들 의약품들을 GC/MS로 확인하였다. 결론적으로, 우리가 구축한 HPTLC 및 GC/MS 데이터베이스체계는 생체시료에서 미지의 의약품성분을 검색하는데 매우 유용한 방법으로 사료된다.

  • PDF

기술과 교육에서 TRIZ(창의적 문제해결 이론)의 적용 방안 탐색 (Exploring Strategies for Applying TRIZ to Technology Education)

  • 문대영
    • 대한공업교육학회지
    • /
    • 제31권2호
    • /
    • pp.155-176
    • /
    • 2006
  • 이 연구는 기술과 교육에서 TRIZ의 도입 가능성과 적용 방안을 찾기 위해 수행되었다. TRIZ가 갖는 강력한 잠재력을 과연 초 중등 기술과 교육에 도입할 수 있는지, 어떻게 적용할 수 있는지에 대한 총체적인 탐색을 통해 기술과 교육에서 추구하는 기술적 창의력과 기술적 문제 해결력을 학교 현장에 구체적으로 구현하기 위한 이론적 근거를 제시하고자 하였다. 연구의 목적을 달성하기 위해서 Contradiction, 40 Principles, 76 Standard solutions, Multi screen method, Effects, The law of technology evolution, ARIZ 등의 TRIZ 개념과 핵심 원리를 파악하였다. 또한, 이를 바탕으로 하여 초 중등 기술과 교육에서 TRIZ의 도입 가능성과 적용 방안을 탐색하고, 타당성을 검토하였다. 이 연구에서는 초 중등 기술과 교육에서 모순, 40가지 원리, 76가지 표준해, 다차원 분석, 자연 효과, 기술 진화 법칙, ARIZ 등과 같은 TRIZ의 기본 개념을 어떻게 적용할 수 있을까에 대한 방안을 각각 제시하고 이들에 대하여 타당성 검토를 실시하였으며, 그 결과 '40가지 원리'만 초 중등 기술 교육에 적용하기에 적합한 것으로 판정되었다. 또한, 40가지 원리 중에서 초등 기술 교육에서는 분할 나누기, 추출 제거, 국부적 특성, 비대칭, 병합 동시 수행, 다용도 범용성, 균형 유지, 반대 조치, 매개체 사용, 자체 해결, 값 싼 물체로 대체 일회용, 유연하고 얇은 막 사용, 색상 변화, 동질성, 폐기와 재생, 복합 재료 등과 같은 15가지 원리가 적합하며, 중등 기술 교육에서는 분할 나누기, 추출 제거, 국부적 특성, 비대칭, 병합 동시 수행, 다용도 범용성, 균형 유지, 사전 반대 조치, 사전 조치, 사전 예방, 반대 조치, 자유도 증가, 조금 덜 또는 조금 더, 유용한 조치의 지속, 해로운 것을 이로운 것으로 전환, 매개체 사용, 자체 해결, 값 싼 물체로 대체 일회용), 유연하고 얇은 막 사용, 색상 변화, 동질성, 폐기와 재생, 특성 변화, 상태 전이, 열팽창, 복합 재료 등과 같은 26가지 원리가 적합함을 확인할 수 있었다.

부산지역 의료기관의 흉부촬영 조건과 피폭선량에 관한 조사연구 (A Study on Radiographical Conditions and Exposure Doses During Chest Radiography at Medical Facilities in Pusan)

  • 전성오;조영하
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제20권2호
    • /
    • pp.49-55
    • /
    • 1997
  • This study was carried out to investigate radiographical and operating conditions of X-ray units and exposure doses to patients during chest radiography, so that the results could provide basic data used for reducing the exposure dose and for providing the diagnostic information with better quality. The conditions and exposure doses of 100 X-ray units mainly used for chest radiography were examined and also 100 radiological technologists mainly handling those apparatus at 76 medical facilities in Pusan were surveyed using a questionnaire from October 1 to December 31 in 1995. The following results were obtained from the study : 1. It was found that most units were capable of taking a high tube voltage radiography by showing 67% of the units equipped with the maximum tube voltage of 150 kV, 94% with more than 500 mA for the rating capacity and 85% with the full wave type of a signal phase. 2. For actual chest radiographical conditions, however, 80% of the units were operated at $60{\sim}100\;kVp$ and only 14% at 100 kVp and over for the high tube voltage. 3. The average exposure time was less than 0.1 second, and eighty four percent of the units adapted the X-ray tube currents ranging from 200 to 300 mA, 80% the focus-film distances between 180 and 210 cm, and 63% the focus sizes of more than 2.0 mm. 4. Most units(98%) employed additional filters made of aluminum, 75% the thickness of filters less than 2.0 mm, and only 2 units the compound filters. 5. Ortho chromatic system was only adopted in 13% of screen film system for the units, and 73% used the grid ratio at 8 : 1 for the low tube voltage during chest radiography. 6. The average exposure dose of all X-ray units during chest radiography was $371\;{\mu}Sv$ with a difference of about 16 times between the minimum to the maximum, and $386\;{\mu}Sv$ both at hospitals and at health centers, followed by $380\;{\mu}Sv$ at general hospitals and $263\;{\mu}Sv$ at university hospitals without showing any statistically significant differences. In conclusion, since patients during chest radiography at medical facilities in Pusan exposed to high levels of radiation, it is recommended that appropriate added filters and grids necessary for the high tube voltage radiography and high-speed screen systems should be adopted and used as soon as possible in order to reduce exposure dose to the patients.

  • PDF

촉매가 첨가된 SnO2 후막형 가스센서의 특성 연구 (Characteristics of SnO2 Thick Film Gas Sensors Doped with Catalyst)

  • 이돈규;유윤식;이지영;유일
    • 한국전기전자재료학회논문지
    • /
    • 제23권8호
    • /
    • pp.622-626
    • /
    • 2010
  • Cu doped $SnO_2$ thick films for gas sensors were fabricated by screen printing method on alumina substrates and annealed at $500^{\circ}C$ in air, respectively. Structural properties of $SnO_2$ by X-ray diffraction showed (110), (101) and (211) dominant tetragonal phase. The effects of catalyst Cu in $SnO_2$-based gas sensors were investigated. Sensitivity of $SnO_2$:Cu sensors to 2,000 ppm $CO_2$ gas and 50 ppm $H_2S$ gas was investigated for various Cu concentration. The highest sensitivity to $CO_2$ gas and $H_2S$ gas of Cu doped $SnO_2$ gas sensors was observed at the 8 wt% and 12 wt% Cu concentration, respectively. The improved sensitivity in the Cu doped $SnO_2$ gas sensors was explained by decrease of electron depletion region in Cu and $SnO_2$ junction, and increase of reactive oxygen and surface area in the $SnO_2$.

중.저온 고체산화물 연료전지용 고전도성 공기극 소재 합성 및 전기화학적 특성 평가 (Synthesis characterization of a high conductivity LSCF cathode materials and electrochemical studies for IT-SOFC)

  • 김효신;이종호;김호성;이윤성
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.139-139
    • /
    • 2010
  • LSM is widely used as a cathode material in SOFC, because of its high electrochemical activity, good stability and compatibility with YSZ electrolyte at high temperature. However, LSM in traditional cathode materials will not generate a satisfactory performance at intermediate temperature. In order to reduce the polarization resistance of cell with the operating temperature of SOFC system, the cathode material of LSCF is one of the most suitable electrode materials because of its high mixed ionic and electronic conductivity. In this report, cathode material, $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ powder for intermediate temperature SOFC was synthesized by Pechini method using the starting materials such as nitrate of La, Sr, Co and Fe including ethylene glycol, etc. As a result, the synthesized powder that calcined above $700^{\circ}C$ exhibits successfully perovskite structure, indicating phase-pure of LSCF. Moreover, the particle size, surface area, crystal structure and morphology of the synthesized oxide powders were characterized by SEM, XRD, and BET, etc. In order to evaluate the electrochemical performance for the synthesized powder, slury mixture using the synthesized cathode material was coated by screen-printing process on the anode-supported electrolyte which was prepared by a tape casting method and co-sintering. Finally, electrochemical studies of the SOFC unit cell, including measurements such as power density and impedance, were performed.

  • PDF

The Analysis of the Airplane Flutter on Low Band Television Broadcasting Signal

  • Wonggeeratikun, A.;Noppanakeepong, S.;Leelaruji, N.;Hemmakorn, N.;Moriya, Y.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.1648-1653
    • /
    • 2003
  • The paper studies effect of quasi-periodic or airplane flutter phenomenon on television broadcasting signal. Airplane flutter is a very important problem. It causes the receiving antenna to receive both direct signal by the Tx (Transmitter antenna) and reflected signal scattered by the airplane with phase delay. The sum of two signals results in fading, sometime collapse and distortion of picture on TV screen. We performed measurement and modeling this phenomenon on TV signal when the airplane flew across and range Tx and Rx (Receiver antenna). The frequency 60.75MHz (Aural frequency of CH3) is used under tests. A single scatter multipath model is introduced. It is used to duplicate some of the measured data and show the dependence of power variation on the airplane fluttering. The fluctuation of the airplane flutter phenomenon was calculated to be around 2-4dB. The Yaki antenna is used for improving airplane flutter problem because it can make high gain and high directivity.

  • PDF

Maximizing TPBs through Ni-self-exsolution on GDC based composite anode in solid oxide fuel cells

  • 탄제완;이대희;김보경;김주선;문주호
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.402.1-402.1
    • /
    • 2016
  • The performance of solid oxide fuel cells (SOFCs) is directly related to the electrocatalytic activity of composite electrodes in which triple phase boundaries (TPBs) of metallic catalyst, oxygen ion conducting support, and gas should be three-dimensionally maximized. The distribution morphology of catalytic nanoparticle dispersed on external surfaces is of key importance for maximized TPBs. Herein in situ grown nickel nanoparticle onto the surface of fluorite oxide is demonstrated employing gadolium-nickel co-doped ceria ($Gd0.2-xNixCe0.8O2-{\delta}$, GNDC) by reductive annealing. GNDC powders were synthesized via a Pechini-type sol-gel process while maximum doping ratio of Ni into the cerium oxide was defined by X-ray diffraction. Subsequently, NiO-GNDC composite were screen printed on the both sides of yttrium-stabilized zirconia (YSZ) pellet to fabricate the symmetrical half cells. Electrochemical impedance spectroscopy (EIS) showed that the polarization resistance was decreased when it was compared to conventional Ni-GDC anode and this effect became greater at lower temperature. Ex situ microstructural analysis using scanning electron microscopy after the reductive annealing exhibited the exsolution of Ni nanoparticles on the fluorite phases. The influence of Ni contents in GNDC on polarization characteristics of anodes were examined by EIS under H2/H2O atmosphere. Finally, the addition of optimized GNDC into the anode functional layer (AFL) dramatically enhanced cell performance of anode-supported coin cells.

  • PDF

레거시로부터 CBD로의 재공학을 위한 메타 모델 설계 기법 (A Design Technique of Meta-Model for Reengineering from Legacy to CBD)

  • 김철진;조은숙
    • 한국멀티미디어학회논문지
    • /
    • 제8권3호
    • /
    • pp.398-412
    • /
    • 2005
  • 레거시 시스템을 새로운 하드웨어 플랫폼과 새로운 소프트웨어 개발 패러다임에 맞도록 이주하려는데 대한 관심이 증가하고 있다. 그 이유는 레거시 시스템의 유지보수에 많은 비용이 들고 기존 시스템에 대한 문서 정보가 부족하다는데 있다. 레거시 시스템을 새로운 시스템을 변환하기 위해 스크린 스크래핑, 래핑, 부분 변환, 재개발 등등의 여러 다양한 접근법들과 도구, 그리고 방법론들이 제시되어왔다. 그러나 이러한 접근법들은 대부분이 코드 변환 혹은 일부 모델 변환 수준이기 때문에 아키텍처나 요구사항 수준에서의 변환까지는 체계적으로 제시하지 못하였다. 따라서, 본 논문에서는 이러한 한계점을 극복하기 위하여 아키텍처와 요구사항 단계까지 적용할 수 있는 3차원 공간 개념을 적용한 메타 모델 기반의 접근법을 제시하고자한다. 이러한 통합 모델은 재 공학에 있어서 역 공학 단계인 코드에서 아키텍처 그리고 순 공학 단계인 아키텍처에서 코드로의 자연스러운 변환 혹은 협력 진화(Co-evoluton)를 유도한다.

  • PDF