• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.145-149
• /
• 1997

A laser mesurement system, a modified Michelson interferometer,which can accurately measure high speed length and position of servomechanisms by detecting a phase shift in the measurement beam using an optical interference was developed. A frequency stabilized laser source and a 20 fold frequency interpolation and digitizing circuit were applied to the system. The refractive index of the ambient air was calibrated through the Edlen's formula. The system achieved a resolution of .lambda./40,16nm, a maximum allowable measurement speed of 600 mm/sec, and a length measurement range of 1500mm. Performance of the system was evaluated on the machining center in short and long length measurements

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.1
• /
• pp.1-10
• /
• 2010

In the present paper, a numerical method based on the constraint interpolation profile (CIP) method is applied for simulating two-dimensional violent sloshing problems. The free surface boundary value problem is considered as a multiphase problem which includes water and air. A stationary Cartesian grid system is adopted, and an interface capturing method is used to trace the shape of free surface profile. The CIP combined unified procedure (CCUP) scheme is applied for flow solver, and the tangent of hyperbola for interface capturing (THINC) scheme is used for interface capturing. Numerical simulations have been carried out for partially-filled 2D tanks under forced sway and roll motions at various filling depths and frequencies. The computational results are compared with experiments and/or the other numerical results to validate the present numerical method.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.1
• /
• pp.63-73
• /
• 1990

Low cost automatic welding machine is developed for the purpose of welding process automation of automobile parts with two dimensional welding joints. Developed gantry type machine is equipped with X, Y and roll axis stepping motors, and dirive units units are designed by two phase on drive scheme using shift registers. Control system is constructed by single board microcomputer of Z80A CPU, and also it is equipped with parallel input output ports and counter-timer chips. Linear and circular interpolation of welding head movement is accomplished by employing software digital differential analyzers. It has been shown that contour error of develped system is withi ${\pm}1.0mm$, meaning that the machine is suitable for CO2 arc welding process of automoble parts and is expected it's application to industry.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.772-773
• /
• 2015

This paper presents a dynamic model of 2-D magnetostriction in electrical steel sheet (ESS) under rotating flux magnetization conditions and its implementation in finite element method (FEM). For an arbitrary waveform of magnetic flux density (B), the corresponding magnetostriction waveform can be predicted by the model. In order to apply the model to FEM easily, the model is based on trilinear interpolation method. As an example, the model is applied to a three-phase transformer constructed by highly grain-oriented electrical steel sheets and the numerical results by the magnetostriction model are discussed.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.523-528
• /
• 2000

In this paper, the new type biped walking robot which is composed of the minimum number or links just for walking and its appropriate gaits are proposed. The proposed new gaits for this robot are four-crossing, crawling, standing and turning gait. In designing the biped robot we propose the Performance Index which means the needed torque per a moving distance and generate foot trajectories by $3^{rd}$ order spline Interpolation. Among those, numerically we find the optimal conditions which minimize the Performance Index. Dynamically stable walking of the biped robot is realized by satisfying the stability condition of ZMP(zero moment point), which is related to maintaining the ZMP within the region of the supporting foot during the s1n91e leg support phase. We determine the region of mass center from the stability condition of ZMP and plan references which track the mass conte. trajectory of constant velocity. Finally we implement the gaits statically tracking the planned trajectories using PD control method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.41-44
• /
• 2001

본 논문에서는 음성합성 과정에서 음성유닛을 연결할 때 모음의 결합부분에서 포만트의 불일치로 일어나는 부자연스러운 합성음이 발생되는 문제점을 개선하기 위해서 앞에 오는 음성 유닛과 뒤에 오는 합성 유닛의 포만트 변경에 관한 방법을 제안한다. 요즘에 연구되는 코퍼스 방식에선 에너지와 피치와 음순지속시간 등을 기준으로 유닛을 선택한 후 연결하지만, 스펙트럼의 불일치가 이루어진다. 이런 스펙트럼의 불일치는 음질의 저하를 유도한다. 그래서 앞 음성유닛의 연결부분의 일정부분과 뒤 음성 유닛의 연결부분의 일정부분의 포만트를 천이시켜 일치시켜줌으로써 음질을 향상시켰다. 음성신호를 FFT한 후 magnitude와 phase를 분리한 후 앞 음성의 연결부분의 magnitude와 뒷 음성의 연결부분의 magnitude를 기준으로 linear interpolation한 값을 목표치로 이동하고 다시 합하여 원 신호를 복원하는 방식으로 포만트를 변경시켰다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.269-272
• /
• 2005

For the three decades, the mold-filling of injection molding process was modeled as Hele-Shaw model. However, this model can not consider the 3D effect. In this paper, numerical simulations of three dimensional mold-filling during the filling phase were performed. The governing equations were discretized by segregated finite element method, which used equal order interpolation for pressure and velocity fields. The iterative linear equation solver (JCG, SOR) was employed for the solution of the momentum and pressure equations. Volume of Fluid (VOF) was employed for the melt front advancement. To check the validity of the numerical results, the results were compared with the experimental ones. The agreements between the experiment and the numerical results were found to be satisfactory.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.520-527
• /
• 2016

A new dual-loop digital delay-locked loop (DLL) using a hybrid (binary + sequential) search algorithm is presented to achieve both wide-range operation and high delay resolution. A new phase-interpolation range selector (PIRS) and a variable successive approximation register (VSAR) algorithm are adopted to resolve the boundary switching and harmonic locking problems of conventional digital DLLs. The proposed digital DLL, implemented in a $0.18-{\mu}m$ CMOS process, occupies an active area of $0.19mm^2$ and operates over a wide frequency range of 0.15-1.5 GHz. The DLL dissipates a power of 11.3 mW from a 1.8 V supply at 1 GHz. The measured peak-to-peak output clock jitter is 24 ps (effective pk-pk jitter = 16.5 ps) with an input clock jitter of 7.5 ps at 1.5 GHz. The delay resolution is only 2.2 ps.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.11
• /
• pp.194-197
• /
• 1993

A technique for fast image reduction or expansion, in which the reduction(expansion) factor is either any integer or any rational number M/L Is represented. The multiresolution is modeled as an interpolation and filtering followed by a decimation. The model enables frequency domain analysts of the muitiresolution representations as well as convenient design of the Kernels(filters). Using any rin linear phase(Type I) filters a fine to coarse multiresolution structure can be generated.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.151-156
• /
• 1997

A laser measurement system, a modified Michelson interferometer, which can accurately measure high speed length and displacement of servomechanisms by detecting a phase shift in the measurement beam using an optical interference was developed. A frequency stabilized laser source and a 20 fold frequency interpolation and digitizing circuit were applied to the system. The refra- ctive index of the ambient air was calibrated through the Edlens formula. The system achieved a resolution of /40, 16nm, a maximum allow-able measurement speed of 600nm/sec, and a length measure- ment range of 1500 mm. Performance of the system was evaluated on the machining center in short and long length measurements.