• 한국통신학회논문지
• /
• 제35권9A호
• /
• pp.896-905
• /
• 2010

In this paper, we present a new sensing method based on phase entropy. Entropy is a measurement which quantifies the information content contained in a signal. For the PSK modulation, the information is encoded in the phase of the transmitted signal. By focusing on phase, more information is collected during sensing, which suggests a superior performance. The sensing based on Phase entropy is not limited to PSK signal. We generalize it to PAM signal as well. It is more advantageous to detect the phase. The simulation results have confirmed the excellent performance of this novel sensing algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.2891-2903
• /
• 2020

Phase-generated carrier (PGC) demodulation algorithm is the main demodulation methods in Fiber-optic interferometric sensors (FOISs). The conventional PGC demodulation algorithms are influenced by the carrier phase delay between the interference signal and the carrier signal. In this paper, an automatic carrier phase delay synchronization (CPDS) algorithm based on orthogonal phase-locked technique is proposed. The proposed algorithm can calculate the carrier phase delay value. Then the carrier phase delay can be compensated by adjusting the initial phase of the fundamental carrier and the second-harmonic carrier. The simulation results demonstrate the influence of the carrier phase delay on the demodulation performance. PGC-Arctan demodulation system based on CPDS algorithm is implemented on SoC. The experimental results show that the proposed algorithm is able to obtain and eliminate the carrier phase delay. In comparison to the conventional demodulation algorithm, the signal-to-noise and distortion ratio (SINAD) of the proposed algorithm increases 55.99dB.

• 한국컴퓨터정보학회논문지
• /
• 제21권11호
• /
• pp.79-83
• /
• 2016

In this paper, we define four levels of analysis, design, implementation, and testing of the configuration of the development phase by S/W development life cycle. In particular, it dealt with the stage of the analysis phase to prepare an information system developed intensively. Details of the derivation of the information security requirements, it can be seen that comes from the perspective of confidentiality, integrity, availability and accountability, etc. It dealt with from the first manifestations of the projects planning to final planning to establish information security in activities of the Information Security requirements. As an example exhibited by assessing the information security analysis phase activities of S corporations, it can be seen that the improved sales rise in information security activities.

• Journal of information and communication convergence engineering
• /
• 제13권4호
• /
• pp.280-285
• /
• 2015

Double random phase encryption (DRPE) is one of the well-known optical encryption techniques, and many techniques with DRPE have been developed for information security. However, most of these techniques may not solve the fundamental security problem caused by using fixed phase masks for DRPE. Therefore, in this paper, we propose a key phase mask updating scheme for DRPE to improve its security, where a spatial light modulator (SLM) is used to implement key phase mask updating. In the proposed scheme, updated key data are obtained by using previous image data and the first phase mask used in encryption. The SLM with the updated key is used as the second phase mask for encryption. We provide a detailed description of the method of encryption and decryption for a DRPE system using the proposed key updating scheme, and simulation results are also shown to verify that the proposed key updating scheme can enhance the security of the original DRPE.

• Current Optics and Photonics
• /
• 제6권6호
• /
• pp.634-641
• /
• 2022

A frequency stable and tunable optoelectronic oscillator (OEO) incorporating an optical phase shifter and a phase-shifted fiber Bragg grating (PS-FBG) is designed and analyzed. The frequency tunability of the OEO can be realized by using a tunable microwave photonic bandpass filter consisting of a PS-FBG, a phase modulator. The optical phase compensation loop is used to compensate for the phase variations of the RF signal from the OEO by adjusting an optical phase shifter. Simulation results demonstrate that the output RF signals of the OEO can be tuned in a frequency range of 118 MHz to 24.092 GHz. When the ambient temperature fluctuates within ±3.9 ℃, the frequency drifts of the output RF signals are less than 68 Hz, the side-mode suppression ratios are more than 69.39 dB, and the phase noise is less than -92.49 dBc/Hz at a 10 kHz offset frequency.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.373-374
• /
• 2008

This paper proposes an architecture for high-speed data processing of the DF-DPD. The DF-DPD have the architecture feedbacking the detected phase to reduce the noise of the previous symbol as phase reference. However, the feedback of the detected phase results in lower data processing speed than that of the conventional differential phase detection. In this paper, an architecture is proposed for high-speed data processing of the differential phase detectors with decision feedback in the DF-DPD.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권6호
• /
• pp.629-633
• /
• 2015

An active balun using current steering for phase correction is presented. The proposed active balun is constructed with two different unit balun structures based on current steering to reduce phase and amplitude errors. This type of topology can be compared with the conventional phase and amplitude correction techniques which do not incorporate the current steering. Designed and fabricated active balun in $0.18{\mu}m$ CMOS process operates over 0.95 - 1.45 GHz band, showing input reflection coefficient under -15 dB, phase error of $11^{\circ}$ and gain error of 0.5 dB. Gain is measured to be 0.3 dB maximum and power consumption of 7.2 mW is measured.

• 한국산업정보학회논문지
• /
• 제23권4호
• /
• pp.13-22
• /
• 2018

본 논문에서는 스크램블 연산(Scramble Operation) 및 위상 천이 디지털 홀로그래피(PSDH; Phase Shift Digital Holography) 기반 영상 이중 암호화 방법을 제안한다. 암호화하고자 하는 영상을 스크램블 연산을 통해 디지털적으로 1차 암호화를 수행한 후, 위상 변조하고, 위상을 천이시킨 기준파와의 간섭을 통해 2차 암호화 정보를 얻는다. 복호화 과정은 암호화 과정의 역순으로 진행된다. 두 개의 암호화된 영상들을 적절하게 산술 처리하는 위상 천이 디지털 홀로그래피 기술을 통해 디지털적으로 1차 복호화하고, 위상 복조를 한 후, 스크램블 연산 시에 사용한 암호화 키 정보를 이용하여 원래의 영상을 복원한다. 제안된 암호화 방법은 스크램블 연산에 사용된 두 개의 키 정보와 위상 천이 디지털홀로그래피 기술에서 사용된 거리 정보, 광원의 파장 등의 정보를 모두 정확하게 알아야만 원래의 영상을 복원할 수 있다.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2001년도 춘계학술대회논문집:21세기 신지식정보의 창출
• /
• pp.64-76
• /
• 2001

In this paper, A simple image hologram encryption and decryption technique based on the principle of interference are proposed. The technique using the photorefractive material for getting a stable interference pattern is also proposed. And combine these two techniques, I would like to implement a stable optical information security system. In the encrypting process, I would generate binary phase hologram which can reconstruct original image perfectly, and regard this hologram as original image to be encrypted image. And then the hologram is encrypted as randomly generated binary phase image. Reference image is also generated from the encrypted image by applying interference rule. In the decrypting process, I can get a interference intensity by interfering the reference image and the encrypted image in the interferometer. and transform inferference intensity information into phase information. I recover original image by inverse Fourier transforming the phase information. In this process, the intensity information generated by interference of two images is very sensitive to external vibrations. So, I would like to get a stable interference using the characteristic of SPPCM(self pumped phase conjugate mirror) in photorefractive materials, especially BaTiO₃.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.183-184
• /
• 2017

Some of the information created during the design phase of an New NPP life cycle is useful only for the execution of the construction phase; however, much of the information greatly impacts the longer-term operational phase. To most make use of design and construction information produced by data based design system during the construction and operation phase, This research is identified controlled data and drawn design information of controlled equipment from documents generated during the life-cycle stages. This study aimed to analyze related documents to assure traceability of controlled equipment from design phase through O&M and then suggested DB(Data Base) based control method on technical information of major equipment throughout nuclear power plant lifecycle.