• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1190-1196
• /
• 2002

Microwave dielectric properties and multilayer characteristics $(1-x)BiNbO_4-xCaNb_2O_6$ (0${\le}$x${\le}$1.0) ceramics were investigated as a function of $CaNb_2O_6$ content. In the composition range of 0.25${\le}$x${\le}$0.75, the mixture phases of $BiNbO_4$ with stibotantalate structure and $CaNb_2O_6$ with columbite structure were detected and secondary phase or phase transition were not detected. Dielectric constant (K) of $(1-x)BiNbO_4-xCaNb_2O_6$ ceramics was largely dependent on the existing phase and could be estimated by the dielectric mixing rule calculated from maxwell equation. Typically, dielectric constant (K) of 26, quality factor (Qf) of 4300 GHz and Temperature Coefficient of resonant Frequency (TCF) of -18 ppm/${\circ}C$ were obtained for $0.5BiNbO_4-0.5CaNb_2O_6$ specimens with 0.8 wt% $CuV_2O_6$ sintered at 1000${\circ}C$ for 3h. The deviation of X-Y shrinkage and camber value of the multilayers obtained from $0.5BiNbO_4-0.5CaNb_2O_6$ green sheet sintered at 850∼950${\circ}C$ for 20 min. were smaller than those of $BiNbO_4$ multilayers.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.238-244
• /
• 2008

The essential oil was obtained from the aerial part of Caryopteris incana Miq. by steam distillation, samples were collected by headspace (HS) and solid-phase microextraction (SPME) methods, and the compositions of the essential oil were analyzed by gas chromatography-mass spectrometry (GCMS). The fragrance of the essential oil was fougere and woody. There were sixty-nine constituents in the essential oil: 28 carbohydrates, 22 alcohols, 7 acetates, 7 ketones, 3 aldehydes, and 2 others. Major constituents were 4,6,6-trimethyl [1S-($1{\alpha},2{\beta},5{\alpha}$)]-bicyclo[3.1.1]hept-3-en-2-ol (11.8%), taucadinol (9.4%), myrtenyl acetate (9.2%), pinocarvone (7.0%), 1-hydroxy-1,7-dimethyl-4-isopropyl-2,7-cyclodecadiene (6.3%), ${\delta}$-3-carene (6.2%). By SPME extraction, forty-nine constituents were identified: 22 hydrocarbons, 16 alcohols, 6 acetates, 3 ketones, and 2 ethers. Major constituents of the SPME-extracted sample were ${\delta}$-3-carene (12.6%), (-)-myrtenyl acetate (11.2%), 6,6-dimethyl-2-methylene-bicycol [3.1.1] heptan-3-o1 (10.9%), pinocarvone (9.3%). By HS extraction, ten constituents were identified: 5 hydrocarbons, 2 amines, 1 alcohol, and 2 others. Major constituents of the HS-extracted sample were (Z)-2-fluoro-2-butene (34.9%), ${\delta}$-3-carene (6.9%), 6-(4-chlorophenul)tetrahydro-2-methyl-2H-1,2-oxazine (5.9%). The $IC_{50}$ value (0.011 ${\mu}g/mg$) in MTT assay using HaCaT keratinocyte cell line was lower than those of commercially-selling rosemary and tea tree, suggesting more toxicological studies are needed for commercial use of the essential oil of Caryopteris incana Miq.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.997-1006
• /
• 2009

Organic removal efficiency and methane production rate, a feasibility of power generation from biogas, and the optimum conditions for membrane operation were evaluated for the pilot scale (5 tons/day) two-phase anaerobic digestion coupled with ultra filtration (TPADUF) system fed with garbage leachate. The TPADUF system is consisted of a thermophilic acidogenic reactor, a mesophilic methanogenic reactor, and an UF membrane. When garbage leachate with 150 g/L of TCOD was fed to the TPADUF up to organic loading rate (OLR) of 11.1 g COD/L/d, the effluent TCOD was lower than 6 g/L and the average removal efficiencies of TCOD and SCOD were higher than 95%. The methane composition of the gas was 65%, and the methane yield was 39 $m^3/m^3$ garbage leachatefed, 260 $m^3$/tons $COD_{added}$, or 270 $m^3$/tons $COD_{removed}$, even there was some gas leak. The power production per consumed gas was 0.96 kWh/$m^3$ gas or 1.49 kWh/$m^3$ methane. This lower power production efficiency mainly due to the small capacity of gas engine (15 kW class). The membrane was operated at the average flux of 10 L/$m^2$/hr. When the flux decreased, washing with water and chemical (NaOCl) was conducted to restore the flux. In the TPADUF system, optimum pH could be maintained without alkali addition by recycling the membrane concentrate or mixed liquor of the methanogenic digester to the acidogenic reactor. Also, partial production of methane in the acidogenic reactor had a positive effect on lowering the OLR of the methanogenic reactor.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.14-14
• /
• 2011

W (tungsten)-alloys will be the most promising plasma facing armor materials in highly loaded plasma interactive components of the next step fusion reactors due to its high melting point, high sputtering resistance and low deuterium/tritium retention. The bonding technology of tungsten to Cu alloy was one of the key issues. In this paper, W/CuCrZr diffusion bonding has been performed successfully by inserting pure metal interlay. The joint microstructure, interfacial elements migration and phase composition were analyzed by SEM, EDS, XRD, and the joint shear strength and micro-hardness were investigated. The mock-ups were fabricated successfully with diffusion bonding and the cladding technology respectively, and the high heat flux test and thermal fatigue test were carried out under actively cooling condition. When Ni foil was used for the bonding of tungsten to CuCrZr, two reaction layers, Ni4W and Ni(W) layer, appeared between the tungsten and Ni interlayer with the optimized condition. Even though Ni4W is hard and brittle, and the strength of the joint was oppositely increased (217 MPa) due primarily to extremely small thicknesses (2~3 ${\mu}m$). When Ti foil was selected as the interlayer, the Ti foil diffused quickly with Cu and was transformed into liquid phase at $1,000^{\circ}C$. Almost all of the liquid was extruded out of the interface zone under bonding pressure, and an extremely thin residual layer (1~2 ${\mu}m$) of the liquid phase was retained between the tungsten and CuCrZr, which shear strength exceeded 160 MPa. When Ni/Ti/Ni multiple interlayers were used for bonding of tungsten to CuCrZr, a large number of intermetallic compound ($Ni_4W/NiTi_2/NiTi/Ni_3T$) were formed for the interdiffusion among W, Ni and Ti. Therefore, the shear strength of the joint was low and just about 85 MPa. The residual stresses in the clad samples with flat, arc, rectangle and trapezoid interface were estimated by Finite Element Analysis. The simulation results show that the flat clad sample was subjected maximum residual stress at the edge of the interface, which could be cracked at the edge and propagated along the interface. As for the rectangle and trapezoid interface, the residual stresses of the interface were lower than that of the flat interface, and the interface of the arc clad sample have lowest residual stress and all of the residual stress with arc interface were divided into different grooved zones, so the probabilities of cracking and propagation were lower than other interfaces. The residual stresses of the mock-ups under high heat flux of 10 $MW/m^2$ were estimated by Finite Element Analysis. The tungsten of the flat interfaces was subjected to tensile stresses (positive $S_x$), and the CuCrZr was subjected to compressive stresses (negative $S_x$). If the interface have a little microcrack, the tungsten of joint was more liable to propagate than the CuCrZr due to the brittle of the tungsten. However, when the flat interface was substituted by arc interfaces, the periodical residual stresses in the joining region were either released or formed a stress field prohibiting the growth or nucleation of the interfacial cracks. Thermal fatigue tests were performed on the mock-ups of flat and arc interface under the heat flux of 10 $MW/m^2$ with the cooling water velocity of 10 m/s. After thermal cycle experiments, a large number of microcracks appeared at the tungsten substrate due to large radial tensile stress on the flat mock-up. The defects would largely affect the heat transfer capability and the structure reliability of the mock-up. As for the arc mock-up, even though some microcracks were found at the interface of the regions, all microcracks with arc interface were divided into different arc-grooved zones, so the propagation of microcracks is difficult.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.2
• /
• pp.71-77
• /
• 2001

We investigated photoluminescence, long-phosphorescent and crystalline properties with various $Dy_2$$O_3$ compositions (0.0~9.5mol%) in $SrAl_2$$O_4$ : $Eu^{2+}$,$Dy^{3+}$ phosphor powders prepared by the solid state reaction. The highest emission wavelength (520nm) of photoluminescence spectra was not affected by the Dy doping concentrations. The$SrAl_2$$O_4$single phase which was determined by X-ray diffraction and photoluminescence was appeared for the concentrations of $Dy_2$$O_3$$\leq$1.0 mol%. After removal of the pulsed Xe-lamp excitation (360nm), also, excellent long phosphorescent properties of the phosphors were obtained with the concentrations of $Dy_2$$O_3$$\leq$1.0mol%, although the decay time for all phosphors decrease exponentially.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.1001-1008
• /
• 2005

This study examined the effect of corn processing with varying rumen undegradable protein (RUP) on feed intake, milk yield, its composition and, blood characteristics in Holstein cows during the transitional period (21 days pre partum to 21 days post partum). Twenty Holstein cows were randomly assigned to four diets (five cows/diet), ground corn with 30 % RUP (GCR30), ground corn with 40 % RUP (GCR40), flaked corn with 30 % RUP (FCR30), and flaked corn with 40 % RUP (FCR40). The processed corn with varying RUP was fed in total mixed rations (TMR) to cows. Dry matter intake (DMI) was higher with 40 % RUP diet than with 30 % RUP diet, resulting in higher protein and energy intake by cows during pre and post partum (p＜0.05). However, it was not affected by corn processing during pre and post partum. Similarly milk yield was higher with 40 % RUP diet than with 30 % RUP diet. and milk yield was affected by corn processing at RUP 30 % level. Corn processing did not affected the milk fat and protein contents in dairy cows. The concentration of blood non esterified fatty acid (NEFA) were effected by RUP level with flaked corn, however, it was non-significant with RUP levels when given with ground corn. It is concluded that increasing RUP from 30 % to 40 % in iso-nitrogenous diet could increase milk yield in dairy cows during the transitional phase.

• Journal of KIISE:Software and Applications
• /
• v.37 no.6
• /
• pp.430-445
• /
• 2010

Effective service description and modeling methodologies are essential for dynamic service composition to provide autonomous services for users in ubiquitous computing environments. In our previous research, we proposed a 'u-Service' as an abstract and structured concept for operations of devices in ubiquitous environments. In addition, we established the mechanism to structure u-Services as an ontology and the description specification to represent attributes of u-Services. However, it did not provide enough methods or standards to analyze and evaluate the effectiveness of the u-Service ontology in the design time. Since existing quality models for software products or computing systems cannot consider characteristics of ubiquitous services, they are not suitable for ubiquitous service ontology. Therefore, in this paper, we propose a quality evaluation model to design and modeling a good ubiquitous service ontology, based on our u-Service ontology building process. We extract modeling goals and evaluation indicators according to characteristics of ubiquitous service ontology, and establish quality metrics to quantify each quality sub-characteristics. The experiment result of the proposed quality evaluation model for u-Service ontologies which are constructed for our previous works shows that we can analyze the design of ubiquitous service ontology from various angles, and indicate recommendations for improvement.

• Food Science and Preservation
• /
• v.17 no.3
• /
• pp.376-383
• /
• 2010

Including crude fat content, triacylglycerol species, tocopherols and phytosterols were analyzed in 8 kinds of nuts (sunflower seed, cashew nut, walnut, pistachio, pumpkin seed, ginkgo, hazel nut and pecan). The extracted crude fats showed 0.63~39.60 wt%, among which hazel nut showed the highest amount of fat content. Oleic acid (C18:1) was major fatty acids at sn-2 position in cashew nut, pistachio, hazel nut, and pecan while sunflower seed, walnut, and pumpkin seed showed linoleic acid (C18:2) as a major fatty acids at sn-2 position. Especially, ginkgo contained 10.72 wt% of vaccenic acid (C18:1-n7) at sn-2 position. The TAG species of 8 kinds of nuts were analyzed by reverse-phase HPLC, from which PN value ranged 40~52. Among the analyzed nuts, higher content of tocopherols were observed in ginkgo (48.57 mg/100 g), sunflower seed (38.35 mg/100 g), and pumpkin seed(31.43 mg/100 g). Total phytosterols were observed with the range of 88.60~947.20 mg/100 g.

• Journal of Periodontal and Implant Science
• /
• v.42 no.3
• /
• pp.81-87
• /
• 2012

Purpose: The characteristics of oxidized titanium (Ti) surfaces varied according to treatment conditions such as duration time and temperature. Thermal oxidation can change Ti surface characteristics, which affect many cellular responses such as cell adhesion, proliferation, and differentiation. Thus, this study was conducted to evaluate the surface characteristics and cell response of thermally treated Ti surfaces. Methods: The samples were divided into 4 groups. Control: machined smooth titanium (Ti-S) was untreated. Group I: Ti-S was treated in a furnace at $300^{\circ}C$ for 30 minutes. Group II: Ti-S was treated at $500^{\circ}C$ for 30 minutes. Group III: Ti-S was treated at $750^{\circ}C$ for 30 minutes. A scanning electron microscope, atomic force microscope, and X-ray diffraction were used to assess surface characteristics and chemical composition. The water contact angle and surface energy were measured to assess physical properties. Results: The titanium dioxide ($TiO_2$) thickness increased as the treatment temperature increased. Additional peaks belonging to rutile $TiO_2$ were only found in group III. The contact angle in group III was significantly lower than any of the other groups. The surface energy significantly increased as the treatment temperature increased, especially in group III. In the 3-(4,5-Dimethylthiazol- 2-yl)-2,5-diphenyltetrazolium bromide assay, after 24 hours of incubation, the assessment of cell viability showed that the optical density of the control had a higher tendency than any other group, but there was no significant difference. However, the alkaline phosphatase activity increased as the temperature increased, especially in group III. Conclusions: Consequently, the surface characteristics and biocompatibility increased as the temperature increased. This indicates that surface modification by thermal treatment could be another useful method for medical and dental implants.

• Journal of Adhesion and Interface
• /
• v.11 no.4
• /
• pp.155-161
• /
• 2010

A series of ethylene vinyl acetate (EVA) based hot melt adhesives containing different types and compositions of tackifier resins were prepared to investigate their rheological behavior and T-peel adhesion strength on polyurethane (PU) elastomeric sheets. C5 aliphatic hydrocarbon resin (C5 resin), C9 aromatic hydrocarbon resin (C9 resin), hydrogenated dicyclopentadiene resin ($H_2$-DCPD resin), and dicyclopentadiene and acrylic monomer copolymer resin (DCPD-acrylic resin) were used as the tackifiers for the hot melt adhesives. To determine the polarity of the tackifiers, their oxygen contents were analyzed, and the DCPDacrylic resin was found to contain an oxygen content higher than the other tackifiers. Only the DCPD-acrylic resin showed complete miscibility with EVA and the homogeneous phase of the hot melt adhesive blends at all compositions. The T-peel adhesion strength between the hot melt adhesives and polyurethane elastomeric sheets was mainly affected by the polarity of the tackifier resins in the hot melt adhesives, rather than by the storage moduli, G', of the hot melt adhesives themselves.