• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.107-118
• /
• 1998

Two-phase neuro-system identification method is presented. The 1$^{st}$-phase identification uses conventional neural network mapping for modeling an input-output system. The 2$^{nd}$ -phase modeling is also performed sequentially using the 1$^{st}$-phase modeling errors. In the 2$^{nd}$ a phase modeling, newly generated input signals, which are obtained by summing the 1st-phase modeling error and artificially generated uniform series, are utilized as system's I-O mapping elements. The 1$^{st}$-phase identification is interpreted as a “Real Model” system identification because it uses system's real data(i.e., observations and control inputs) while the 2$^{nd}$ -phase identification as a “Artificial Model” identification because of using artificial data. Experimental results are given to verify that the two-phase neuro-system identification could reduce the overall modeling errors.rrors.

• 산업기술연구
• /
• 제27권A호
• /
• pp.149-155
• /
• 2007

The counter emf(electromotive forces) of a permanent magnet multi-phase brushless motor is generally a non-sinusoidal wave or a non-ideal trapezoid. So, conventional modeling using a sinusoidal wave or an ideal trapezoid counter emf can result in errors. In order to reduce modeling errors for simulation and analysis the properties of a multi-phase brushless AC motor, this paper proposes a phase variable model that is a mixed modeling technique using both Finite Element Analysis(FEA) based circuits and motor voltage equations. The phase model parameters including the counter emf voltage waveform are obtained by using of FEA, and the mixed modeling technique based on circuits and equations is used to implement a simulation model for multi-phase brushless AC motors with any counter emf voltage waveforms. Adequacy of the proposed model is established from the simulation and experimental results for a seven-phase brushless motor.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1086-1095
• /
• 2013

The main issue of parallel three-phase boost converters is reduction of the low- and high frequency circulating currents. Most present technologies concentrate on low frequency circulating current because the circulating current controller cannot mitigate the high frequency circulating current. In this paper, analytical approach of three-phase coupled inductor applied to parallel system becomes an important objective to effectively reduce the low- and high frequency circulating currents. The characteristics of three-phase coupled inductor based on a structure and voltage equations are mathematically derived. The modified voltage equations are then applied to parallel three-phase boost converters to develop averaged models in stationary coordinates and rotating coordinates. Based on the averaged modeling approach, design of the circulating current controller is presented. Simulation and experimental results demonstrate the effectiveness of the analysis and modeling for the parallel three-phase boost converters using three-phase coupled inductor.

• 한국주조공학회지
• /
• 제20권2호
• /
• pp.129-140
• /
• 2000

This study aims at the phase-field modeling of the phase transformation in graphitization of the cast iron. As the first step, we constructed a phase-field model including the phases with negligible solubility. Under the dilute regular solution approximation, a simplified version of the phase-field model was obtained, which can be used for the phase transformation related with the stoichiometric phases. The results from the numerical calculation of the phase-field model was in good agreement with the exact analytic solution. The compositional shift due to Gibbs-Thomson effect can be reproduced within 0.5% error in the numerical calculation. The interface velocity, whereas, in numerical calculation of phase-field model appeared to be 15% larger than that from the analytic solution. This error is due to the shift of the interface position in phase-field model from the position with ${\phi}=0.5$.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.577-583
• /
• 2022

위상고정루프에 대해 선형 위상-도메인 모델링을 진행하여 시스템의 안정성을 고려한 각 블록의 설계 매개 변수들을 설정한 이후 빠른 동작 특성을 확인하기 위해 Verilog-HDL 기반의 모델링을 수행할 수 있다. 이때 단순한 동작 특성뿐 아니라 위상잡음 및 비선형 특성까지 모델링에 반영할 수 있는데, 본 논문에서는 디지털-시간 변환기(DTC)의 비선형 특성 및 디지털 조정 발진기(DCO)의 위상잡음 모델링을 추가로 소개한다. 동작 모델을 사용하여 시스템 레벨의 설계를 마치면 시간-도메인 영역에서 과도 응답 시뮬레이션을 진행하여 설계 타당성을 확인할 수 있으며, 출력 신호 결과를 위상잡음 그래프로 나타내어 이를 이상적인 위상잡음 그래프와 비교함으로써 동작과 성능에 대한 검증이 가능함을 나타내었다. 시간-도메인 영역에서 시뮬레이션 소요시간 비교를 위해 TSMC 0.18-㎛ 공정을 사용한 아날로그 위상고정루프의 설계 결과와 비교하였으며, 6 us의 과도 응답 해석을 진행했을 때 1.43초로 트랜지스터 레벨의 아날로그 설계 방식(692초) 대비 484배 빠른 시뮬레이션 시간을 나타내었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.180-185
• /
• 2000

본 논문에서는 주파수합성기에서 가장 큰 노이즈 Source인 VCO 및 각 단에서 발생하는 Phase Noise의 offset 주파수에 따른 변화를 예측하기위해 2303,15MHz의 주파수합성기를 설계하고 Lascari의 방법을 이용해 분석하였다. 그리고 VCO에서 발생되는 여러 중첩 형태로 된 Phase Noise중 저주파대역에서 문제가 되는 1/f Noise룰 3차 System에서 분석하였다. 3차 System에서는 해석이 복잡하므로 수학적인 분석을 통하여 1/f Noise를 예측한다는 것이 어렵지만 pseudo-damping factor의 도입으로 3차 시스템에서의 1/f Noise variance의 해석이 용이하도록 시도하였고 이를 2차 시스템과 비교하여 분석하였다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.768-775
• /
• 2022

Current MEP designs are mostly applied by 2D-based design methods and tend to focus on simple modeling or geometry information expression such as converting 2D-written drawings into 3D modeling without taking advantage of the strength of BIM application. To increase the demand for BIM-based MEP design, geometric information, and property information of each member of the 3D model must be conveniently linked from the phase of the Design Development (DD) to the phase of Construction Document (CD). To conveniently implement a detailed model at each phase, the detailed level of each member of the 3D model must be specific, and an automatic generation of objects at each phase and automatic detailing module for each LOD are required. However, South Korea's guidelines have comprehensive standards for the degree of MEP modeling details for each design phase, and the application of each design phase is ambiguous. Furthermore, in practice, detailed levels of each phase are input manually. Therefore, this paper summarized the detailed standards of MEP modeling for each design phase through interviews with MEP design companies and related literature research. In addition, items that enable auto-detailing with DYNAMO were selected using the checklist for each design phase, and the types of detailed methods were presented. Auto-detailing items considering the detailed level of each phase were classified by members. If a DYNAMO algorithm is produced that automates selected auto-detailing items in this paper, the time and costs required for modeling construction will be reduced, and the demand for MEP design will increase.

• Nuclear Engineering and Technology
• /
• 제56권8호
• /
• pp.3435-3449
• /
• 2024

Considering that system analysis codes are used for the evaluation of the performance of Passive Safety Systems (PSSs), it is important to investigate the capability of the system analysis code to reliably predict the heat transfer and natural circulation flow, which are the main phenomena governing the performance of a PSS. Since MARS-KS has been widely validated for heat transfer models, this study focuses on evaluating its capability to predict the single and two-phase pressure drops and natural circulation flow. The straight pipe simulation results indicate that the pressure drop predictions are reliable within ±5 % error margin for the single-phase flow and the errors of pressure drop up to - 30 % for the two-phase flow. Through single-phase natural circulation flow analysis, it is concluded that the use of the appropriate K-factor modeling based on the flow regimes is important since the natural circulation flow rate in MARS-KS is mainly affected by the form loss factor modeling. With two-phase natural circulation flow analysis, this study emphasizes the behavior of the system could change significantly depending on the two-phase wall friction and pressure loss modeling. With the analysis results, modeling considerations for the PSS performance evaluation with the system analysis codes are proposed.

• East Asian mathematical journal
• /
• 제36권2호
• /
• pp.147-172
• /
• 2020

The purpose of this study is to provide to understand correctly for teachers and pre-service teachers who have the wrong conception of mathematical modeling. We present the differences modeling problems and general application problems to identify between general application and modeling problems. We propose the entire process from modeling tasks development to solve the problems of mathematical modeling. Additionally, the entire process of the possible solutions was concluded for the presented modeling problems. We proposed what students and teachers should perform at each stage of each phase of the modeling cycle. The concrete tasks were suggested for teachers and students at each phase of modeling cycles, with the specific role of the teacher in the overall process for students' modeling activities.

• Korea-Australia Rheology Journal
• /
• 제21권3호
• /
• pp.161-173
• /
• 2009

This study analyzes especially drag and lift models recently developed for fluid-solid, fluid-fluid or liquid-liquid two-phase flows to understand their applicability on the computational fluid dynamics, CFD modeling of pulsatile blood flow. Virtual mass effect and the effect of red blood cells, RBCs aggregation on CFD modeling of blood flow are also shortly reviewed to recognize future tendencies in this field. Recent studies on two-phase flows are found as very useful to develop more powerful drag-lift models that reflect the effects of blood cell's shape, deformation, concentration, and aggregation.