• Nuclear Engineering and Technology
• /
• v.38 no.2
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.335-342
• /
• 2015

Objective : The purposes of this study was to analyze the effects of the stirrup length fitted to the rider's lower limb length and it's impact on less skilled riders during trot in equestrian events. Methods : Participants selected as subjects consisted of less skilled riders(n=5, mean age: $40.02{\pm}10.75yrs$, mean heights: $169.77{\pm}2.08cm$, mean body weights: $67.65{\pm}7.76kg$, lower limb lengths: $97.26{\pm}2.35cm$, mean horse heights: $164.00{\pm}5.74cm$ with 2 type of stirrups lengths(lower limb ratio 74.04%, and 79.18%) during trot. The variables analyzed consisted of the displacement for Y axis and Z axis(head, and center of mass[COM]) with asymmetric index, trunk front-rear angle(consistency index), lower limb joint(Right hip, knee, and ankle), and average vertical forces of horse rider during 1 stride in trot. The 4 camcorder(HDR-HC7/HDV 1080i, Spony Corp, Japan) was used to capture horse riding motion at a rate of 60 frames/sec. Raw data was collected from Kwon3D XP motion analysis package ver 4.0 program(Visol, Korea) during trot. Results : The movements and asymmetric index didn't show significant difference at head and COM, Also, 74.04% stirrups lengths in trunk tilting angle showed significant difference with higher consistency than that of 79.18% stirrups lengths. Hip and knee joint angle showed significant difference with more extended posture than that of 74.04% stirrups lengths during trot. Ankle angle of 79.18% stirrups length showed more plantarflexion than that of 74.04% stirrups lengths. Average vertical force of rider showed significant difference with higher force at 79.18% stirrups lengths than that of 74.04% stirrups lengths during stance phase. Conclusion : When considering the above, 74.04% stirrups length could be effective in impulse reduction with consistent posture in rather less skilled horse riders.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.2
• /
• pp.10-17
• /
• 2010

Advanced oxidation processes (AOPs) have advantages to reduce the processing time and mineralize contaminants dissolved in groundwater. Recently, remediation techniques for organic contamination in groundwater have been studied, and technology using $UV/H_2O_2$ is generally accepted as one of the most powerful and reliable alternative for the remediation of groundwater contamination. In this study, $UV/H_2O_2$ technology, which generates hydroxyl radical ($\cdot$ OH) as known for strong non-selective oxidant, was used to degrade chlorinated solvents (TCE and PCE), and it was expanded to apply continuous stirred tank reactor (CSTR) system (i.e. combinations of three CSTR). The tested parameters for CSTR system were retention time and groundwater/$H_2O_2$ injection volume ratio. To find optimum parameters for CSTR system, various retention time (6 min ~ 90 min) and groundwater/$H_2O_2$ injection volume ratio (5/1 ~ 119/1) were tested. Other conditions for CSTR were adapted from the batch test results, which concentration of $H_2O_2$ and UV dose were 29.4 mM (0.1%) and 4.3 kWh/L, respectively. Based on the experimental results, the optimum parameters for CSTR system were 20 min for retention time and 119/1 for groundwater/$H_2O_2$ injection volume ratio. Applying these optimum conditions, chlorinated solvents (TCE and PCE) were removed at 99.9% and 99.6%. Moreover, the effluent concentrations of TCE and PCE are 0.036 mg/L and 0.087 mg/L, respectively, which are satisfied the regulatory level (TCE 0.3 mg/L, PCE 0.1 mg/L). Consequently, the CSTR system using $UV/H_2O_2$ technology can achieve high removal efficiency in the event of treatment of groundwater contaminated by chlorinated solvents (TCE and PCE).

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.58-58
• /
• 1999

The diamond films which can be applied to SOD (silicon-on-diamond) structure were deposited on Si(100) substrate using CO/H2 CH4/H2 source gases by microwave plasma chemical vapor deposition(MPCVD), and SOD structure have been fabricated by poly-silicon film deposited on the diamond/Si(100) structure y low pressure chemical vapor deposition(LPCVD). The phase of the diamond film, surface morpholog, and diamond/Si(100) interface were confirmed by X-ray diffraction(XRD), scanning electron microscopy(SEM), atomic force microscopy(AFM), and Raman spectroscopy. The dielectric constant, leakage current and resistivity as a function of temperature in films are investigated by C-V and I-V characteristics and four-point probe method. The high quality diamond films without amorphous carbon and non-diamond elements were formed on a Si(100), which could be obtained by CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5%, respectively. The (111) plane of diamond films was preferentially grown on the Si(100) substrate. The grain size of the films deposited by CO/H2 are gradually increased from 26nm to 36 nm as deposition times increased. The well developed cubo-octahedron 100 structure nd triangle shape 111 are mixed together and make smooth and even film surface. The surface roughness of the diamond films deposited by under the condition of CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5% were 1.86nm and 3.7 nm, respectively, and the diamond/Si(100) interface was uniform resistivity of the films deposited by CO/H2 concentration ratio of 15.3% are obtained 5.3, 1$\times$10-9 A/cm, 1 MV/cm2, and 7.2$\times$106 $\Omega$cm, respectively. In the case of the films deposited by CH4/H2 resistivity are 5.8, 1$\times$10-9 A/cm, 1 MV/cm, and 8.5$\times$106 $\Omega$cm, respectively. In this study, it is known that the diamond films deposited by using CO/H2 gas mixture as a carbon source are better thane these of CH4/H2 one.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.556-562
• /
• 2007

A total of 126 crossbred weanling pigs (average body weight of $6.3{\pm}0.3$ kg) were used to investigate the effect of chito-oligosaccharide (COS) on growth performance, nutrient digestibility, pH of gastro-intestinal tract (GI), intestinal and fecal microflora of young piglets. Pigs were allocated to three dietary treatments based on body weight and gender in a single factorial arrangement. Treatments were control (No COS), T1 (0.2% COS during starter (6-13 kg) and 0.1% COS during grower (13-30 kg) phases, and T2 (0.4% COS during starter (6-13 kg) and 0.3% COS during grower (13-30 kg) phases, respectively. Each treatment had 3 replicates and 14 pigs were raised in each pen. COS is a low molecular weight water-soluble chitosan that can be obtained from chitin of the crab shell after deacetylation with concentrated sodium hydroxide at high temperature and then further decomposition by chitosanase enzyme in the presence of ascorbic acid. For the starter and grower periods, there were no significant differences (p>0.05) in average daily gain (ADG) and feed to gain ratio among treatments. However, during the overall period (6-30 kg), T2 showed better (p<0.05) feed to gain ratio than other treatments. A digestibility study was conducted at the end of grower phase which showed improvement (p<0.05) in DM and crude fat digestibility in T2 over the control. At 25 kg body weight, 6 pigs per treatment (2 per replicate) were sacrificed to determine the effect of diets on pH and microbial count at different sections of the GI tract. The pH of the cecal contents in pigs fed 0.1% COS was higher (p<0.05) than in the other treatments. Total anaerobic bacterial number increased from cecum to rectum in all treatments. The weekly total bacterial counts showed higher (p<0.05) in feces of pigs fed COS than that of untreated pigs at the $8^{th}$ week. The number of fecal E. coli in untreated pigs at $4^{th}$ wk was 7.35 log CFU/g compared to 6.71 and 6.54 log CFU/g in 0.1 and 0.3% COS-treated pigs, respectively. Similarly, at $8^{th}$ wk, fecal clostridium spp. were lower in pigs fed 0.3% COS (5.43 log CFU/g) than in untreated pigs (6.26 log CFU/g). In conclusion, these results indicated that chito-oligosaccharide could improve feed efficiency in young pigs and inhibited the growth of harmful bacteria.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.4
• /
• pp.569-576
• /
• 2012

Two experiments were conducted to investigate the potential for Forsythia suspensa extract (FSE) to substitute for antibiotic in broiler chicken. First, a well-diffusion assay procedure and a 2-fold dilution method were used to determine the bacteriostatic activity of FSE on Escherichia coli K88, staphylococcus aureus, and salmonella was assayed. An inhibitory effect of FSE was observed on the growth of these bacteria. This effect seems to be dose depended, which disappeared after 25.00, 12.50, 1.56 mg/ml. Second, a 42-d trial with 252 broiler chickens (d 1, $38.7{\pm}1.1$ g BW) was conducted to evaluate the effect of dietary supplementation of FSE in broiler chicken. The feeding program consisted of a starter diet from d 1 to 21 and a finisher diet from d 22 to 42. Dietary treatments included were: i) NC: negative control fed a corn-soybean meal based diet; ii) PC: positive control group fed based diet with chlortetracycline; and iii) FC: a test group fed with 100 mg FSE/kg diet. In this study growth performance did not differ among treatments during the starter period. However, dietary supplemental chlortetracycline and FSE increased (p<0.05) average daily gain (ADG), average daily feed intake (ADFI) compared with NC during the finisher and overall phase. Apparent digestibility of calcium on d 21, digestibility of energy and calcium on d 42 of FC was greater (p<0.05) than NC. Moreover, cecal Escherichia coli counts for birds from FC were lower (p<0.05) than NC. Dietary FSE supplementation also improved (p<0.05) villus height and villus height to crypt depth ratios in both duodenum and ileum and decreased (p<0.05) crypt depth in the duodenum. Duodenum villus height and villus height to crypt depth ratio in both duodenum and ileum from the FC group were also greater (p<0.05). Serum growth hormone and IGF-1 were not influenced by different treatments. Apparently, FSE has the potential to substitute for antibiotic in broiler chicken.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5117-5121
• /
• 2014

Endocrine-disrupting chemicals (EDCs) have been reported to interfere with estrogen signaling. Exposure to these chemicals decreases the immune response and causes a wide range of diseases in animals and humans. Recently, many studies showed that licorice (Glycyrrhiza glabra) root extract (LRE) commonly called "gamcho" in Korea exhibits antioxidative, chemoprotective, and detoxifying properties. This study aimed to investigate the mechanism of action of LRE and to determine if and how LRE can alleviate the toxicity of EDCs. LRE was prepared by vacuum evaporation and freeze-drying after homogenization of licorice root powder that was soaked in 80% ethanol for 72 h. We used 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) as an EDC, which is known to induce tumors or cancers; MCF-7 breast cancer cells were used as a tumorigenic model. These were treated with TCDD and various concentrations of LRE (0, 50, 100, 200, $400{\mu}g/mL$) for 24, 48, and 72 h. As a result, TCDD stimulated MCF-7 cell proliferation, but LRE significantly inhibited TCDD-induced MCF-7 cell proliferation in a dose- and time-dependent manner. Expression of TCDD toxicity-related genes, i.e., aryl hydrocarbon receptor (AhR), AhR nuclear translocator, and cytochrome P450 1A1, were subsequently down-regulated by LRE in a dose-dependent manner. Analysis of cell cycle distribution after treatment of MCF-7 cells with TCDD and various concentrations of LRE showed that LRE inhibited the proliferation of MCF-7 cells via G2/M phase arrest. Reverse transcription-polymerase chain reaction and Western blot analyses also revealed that LRE dose-dependently increased the expression of the tumor suppressor genes p53 and p27 and down-regulated the expression of cell cycle-related genes. These data suggest that LRE can mitigate the tumorigenic effects of TCDD in breast cancer cells by suppression of AhR expression and cell cycle arrest. Thus, LRE can be used as a potential toxicity-alleviating agent against EDC-mediated disease.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.89-96
• /
• 2005

As the number of the municipalities which have finished the phase I of their GIS system development projects increases, it is very natural that GIS system operation and maintenance rather than development itself has been a more important concern for these municipalities. It seems to me that these phenomena will be amplified as time goes by, and this is the right time for a series of proper guidelines regarding the GIS system maintenance to be supplied to the related municipalities. The subject which is called as 'GIS maintenance' is surely a very comprehensive area. It has been also founded that the necessity is widely agreed among the concerned people working for the municipalities which have already finished their first GIS projects. Nevertheless, it has been investigated that the studies done up to now in this area is in a very infant state from the quality and also quantity points of views. This paper, therefore, makes one of the very initial trials for the systematical GIS maintenance. Among the areas of GIS maintenance, the GIS database maintenance has been selected as the first trial area because of its natural characteristics of the basic element composing IS(Information System). For this, the present conditions of a variety of municipalities have been investigated as far as GIS maintenance is concerned, and the results are analyzed to produce a series of useful outcomes in terms of facing problems and accompanied plans. For each problem, a solution is defined and for each solution a detailed action plan (item) is derived. For each of the two kinds of GIS data given which are the fundamental map and the underground facilities map, an effective GIS data maintenance plan is suggested for the concerned municipalities.

• Journal of Powder Materials
• /
• v.24 no.6
• /
• pp.437-443
• /
• 2017

SiC-based composite materials with light weight, high durability, and high-temperature stability have been actively studied for use in aerospace and defense applications. Moreover, environmental barrier coating (EBC) technologies using oxide-based ceramic materials have been studied to prevent chemical deterioration at a high temperature of $1300^{\circ}C$ or higher. In this study, an ytterbium silicate material, which has recently been actively studied as an environmental barrier coating because of its high-temperature chemical stability, is fabricated on a sintered SiC substrate. $Yb_2O_3$ and $SiO_2$ are used as the raw starting materials to form ytterbium disilicate ($Yb_2Si_2O_7$). Suspension plasma spraying is applied as the coating method. The effect of the mixing method on the particle size and distribution, which affect the coating formation behavior, is investigated using a scanning electron microscope (SEM), an energy dispersive spectrometer (EDS), and X-ray diffraction (XRD) analysis. It is found that the originally designed compounds are not effectively formed because of the refinement and vaporization of the raw material particles, i.e., $SiO_2$, and the formation of a porous coating structure. By changing the coating parameters such as the deposition distance, it is found that a denser coating structure can be formed at a closer deposition distance.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.172-182
• /
• 2002

Objectives: We did research in the cause of the Pitchers' injury and their recovery process to make a detailed injury list for the purpose of finding the cause of the Korean professional pitchers' injury and its classification. We drew the conclusion through the results as following. Methods: We posed a question to the 80 pitchers playing in the first team of the eight Korean professional baseball team and analyzed the 62 pieces of question paper except the paper having a mistake. We used SAS/PC statistical package in analyzing the data. Results: In the frequency of the pitchers' shoulder injury in the last three years, the injured of all the players were 61.3$\%$ and the injury free players were 28.7$\%$. The cause of the injury was 45.2$\%$ wrong pitching motion, which was the highest value. For the shape of a pain when injured, the reverberation ache feeling when he is hit in the weight commanded an absolute majority as 19.4$\%$. Those who had muscular pain were 17.7$\%$, which was felt mostly at the pitching motion. The most trouble name of the injured shoulder was bicepstendinitis as 16.1$\%$ while the injury of shoulder joint was the lowest as 1.6$\%$. As the most widely used treatment, 25.8 percent of all the players had taken an electronical thraphy after injury. 14.5 percent of the players who had an injury to the shoulder told that they have an operation and 85 percent of them didn't. As a sort of the operation, a repairing of labrum was 44.4 percent, which is the highest value and the 77.8 percent pitchers are performing a normal pitching through rehabilitation after the operation and 22.2 percent of them are undergoing rehabilitation training. Conclusion: The research have shown that the main cause of the injury, concerning the Korean professional pitchers throwing lots of ball in both matches and practices, is overuse syndrome, bad mechanism, muscle weakness and instability of balance. I think that the role of trainer, physical therapy, and team physician taking charge of the players' injury must learn physical test method by heart exactly to check up the state of the injury definitely at the initial phase. Moreover, when the cause of the injury part after a close examination is discovered, the scientific and good surgery is essential to the rehabilitation success and making a classification of shoulder instability is useful to make a operation plan as well as the players' rehabilitation, treatment.