• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.157-163
• /
• 2024

We developed a 3-channel fiber laser with a common seed and a phase control system for laser beam combining through a diffractive optical element. Beam combining was performed by adjusting the angles of the beams incident on the diffractive optical elements, and the phase of each beam was controlled to maximize the intensity of the combined laser beam. The power of the 3-channel laser before passing through the diffractive optical elements is about 65 mW. The power of the combined beam varied between 2.9 mW and 48.3 mW depending on the phase change of each channel. Through phase control, the output of the combined beam can be maintained at 42 mW for more than 91.8% of the total time. It is expected that higher combining efficiency can be achieved by improving the transmittance of the diffractive optical elements and the performance of the phase control system.

• Journal of the Korean Vacuum Society
• /
• v.14 no.3
• /
• pp.143-146
• /
• 2005

A new method of x-ray photon correlation spectroscopy (XPCS) using coherent x-rays is developed recently for probing the dynamics of surface height fluctuations as a function of lateral length scale. This emerging technique applies the principles of dynamic light scattering in the x-ray regime. The short wavelength and slow time scales characteristic of XPCS extend the phase space accessible to scattering studies beyond some restrictions by light and neutron. In this paper, we demonstrate XPCS to study the dynamics of surface fluctuations in thin supported polymer films. We present experimental verification of the theoretical predictions for the wave vector and temperature dependence of the capillary wave relaxation times for the supported polymer films at melt for the film thicknesses thicker than 4 times of the radius of gyration of polymer. We observed a deviation from the conventional capillary wave predictions in thinner films. The analysis will be discussed in terms of surface tension, viscosity and effective interactions with the substrate.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.1
• /
• pp.20-25
• /
• 2008

Structural studies have been performed on precipitation hardening and microstructural variations found in Ti-Al-Cr ternary $L1_0$- and $L1_2$-phase alloys using transmission electron microscopy. Both the $L1_0$ and $L1_2$ phase alloys harden by aging at 973 K after solution annealing at higher temperatures. The amount of age hardening of the $L1_2$ phase alloy is larger than that of the $L1_0$ phase alloy. The phase separation between $L1_0$ and $L1_2$ phase have not been observed by aging at 973 K. But $Al_2Ti$ was formed in each matrix alloy during aging. The crystal structure of the $Al_2Ti$ phase is a $Ga_2Zr$ type in the $L1_0$ and a $Ga_2Hf$ type in the $L1_2$ phase, respectively. At the beginning of aging the fine coherent cuboidal $Al_2Ti$-phase are formed in the $L1_0$ phase. By further aging, two variants of $Al_2Ti$ precipitates grow along the two {110} habit planes. On the other hand, in the $L1_2$ phase, the $Al_2Ti$ phase forms on the {100} planes of the $L1_2$ matrix lattice. After prolonged aging the precipitates are rearranged along a preferential direction of the matrix lattice and form a domain consisting of only one variant. It is suggested that the precipitation of $Al_2Ti$ in each matrix alloy occurs to form a morphology which efficiently relaxes the elastic strain between precipitate and matrix lattices.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.533-544
• /
• 2006

The amplitude and phase lag of surface deformation were determined for a compliant coating under the action of turbulent pressure fluctuations. For this purpose, pressure fluctuations were measured experimentally. The amplitude and duration of coherent wave train of pressure fluctuations were investigated using digital filtration. The transient response was calculated for stabilization of forced oscillations of the coating in approximation of local deformation. The response of coating was analyzed with considerations of its inertial properties and limited duration of coherent harmonics action of pressure fluctuations. It is shown that a compliant coating interacts not with the whole spectrum of pressure fluctuations, but only with a frequency range near the first resonance. According to the analysis, with increasing elasticity modulus of the coating material E, deformation amplitude decreases as 1/E, and dimensionless velocity of the coating surface decreases as $1/\sqrt{E}$. For sufficiently hard coatings, deformation amplitude becomes smaller than the thickness of viscous sublayer, while surface velocity remains comparable to vertical velocity fluctuations of the flow.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.7
• /
• pp.1127-1140
• /
• 1997

With the study for identifying the transmission characteristics of vibration and noise generated by operating engine system of a vehicle, recently many engineers have studied actively the reduction of vibration and noise inducing uncomfortableness to the passenger. In this study, output noise was analyzed by multi-dimensional spectral analysis and vector synthesis method. The multi-dimensional analysis method is very effective in case of identification of primary source, but this method has little effect on suggestion for interior noised reduction. For compensation of this, vector synthesis method was used to obtain effective method for interior noise reduction, after identifying primary source for output noise. In this paper, partial coherence function of each input was calculated to know which input was most coherent to output noise, then with simulation of changes for input magnitude and phase by vector synthesis diagram, the trends of synthesized output vector was obtained. As a result, the change of synthesized output vector could be estimated.

• Journal of the korean society of oceanography
• /
• v.38 no.3
• /
• pp.122-134
• /
• 2003

Low-pass filtered time series of wind, coastal temperature, sea level and current were analyzed to understand the coastal upwelling processes in the southeast coast of Korea. Southerly winds favorable for coastal upwelling were dominant in summer of 1997. Total period of four major wind events amounts to 58 days during one hundred days from June to early September. Coastal temperature is most sensitive to variations of wind. The time lag between the onset of southerly (northerly) winds and decrease (increase) of temperature is 3-18 hours. In the frequency domain the coherent bands have periods of 2.4 and 4.0-5.4 days with respective phase lags of 17 and 27-37 hours. Despite the sensitive response, the magnitude of temperature change is not quantitatively proportional to the intensity or duration of the wind, because it depends on the degree of baroclinic tilting of isotherms built dynamically by the strong Tsushima Warm Current (TWC). Current is particularly strong near the coast and has a large vertical shear during the upwelling periods, which is associated with the baroclinic tilting. Both of current and sea level are poorly coherent with wind or temperature except for the period of 4 days.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.73-73
• /
• 2010

The purpose of this study is to analyze illustrations, contents, and experiment in 6 kinds of science textbook from the 9th grade covering the phase change of the Moon (on the phase change of the Moon in six 9th grade science textbook) and to suggest coherent and effective contents and frame of the science textbook. Hence, the researcher decided the study problem. The study problems are as follows; 'Are the illustrations in the science textbook presented to help understand the phase change of the Moon depending on the position of the observer?', 'Does the contents of the book clearly mention the phase change of the Moon?', 'Can students understand the phase change of the Moon through the experiments in the science textbook?', 'Do illustrations, contents, and experiment of the science textbook consistently explain phase change of the Moon?'. 10 persons (9graduate students including the researcher) took part in this study. All things unanimously agreed upon by all participants were reflected in the results. The results are as follows. First, the universe observer's view point is mixed with the earth observer's view in illustration of these science textbook regarding the phase change of the Moon. Moreover, illustrations of some textbooks are presented with such words as 'sunrise', 'midnight' and consequently contain too much contents. Second, the contents of the science textbook concerning the phase change of the Moon is not described clearly. In addition, they don't give clear and detailed explanations for the reason of the phase change of the Moon. Third, all of the textbooks, except one textbook, describe the experiment regarding the phase change of the Moon with the earth observer's view point but don't specifically mention that the view point is that of the earth observer's view point. Fourth, illustrations, contents, and experiments in the science textbook don't coherently explain the phase change of the Moon. In addition, it is confirmed through the process of the result analysis that the described contents in the science curriculum is not well constructed or logical.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1161-1168
• /
• 2010

The FHSS(Frequency Hopping Spread Spectrum), in which a transmitter changes its carrier frequency according to a certain hopping pattern, is widely used in the military communication system, since it is highly resistant to deliberate Jamming. However, the difference of BER performance of satellite communication system which using the different modulation scheme and Jamming model was not studied. Thus, in this paper, we consider PBNJ(Partial-Band Noise Jamming) and WPBJ(Worst case Partial-Band noise Jamming) as Jamming models, and evaluate BER(Bit Error Rate) performances of NC-MFSK(Non-Coherent M-ary Frequency-Shift Keying), SDPSK(Symmetric Differential Phase-Shift Keying), and GMSK(Gaussian filtered Minimum-Shift Keying) modulation schemes. Based on the results, we suggest the best transmission method for each condition.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.18-23
• /
• 2007

In this Paper, we consider multiple input multiple output Feher-patented quadrature phase shift keying (MIMO-FQPSK) system supporting high spectral efficiency and throughput. Based on the fact that the complex baseband signal sampled at every bit duration has only eight phase values and its signal can be considered as 8-phase-shift keying signal, FQPSK demodulation with maximum likelihood sequence estimation(MLSE) is considered and it is extended to MIMO system. The performance of MIMO-FQPSK receiver is analyzed by computer simulation and by considering the union upper bounds for zrero forcing detection and minimum mean square error detection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.824-831
• /
• 2013

The delta driven GMSK is a modulation scheme to generate the gaussian pulse by the bipolar delta signal and to modulate the phase function with the differential gaussian pulse between $+T_b/2$ and $-T_b/2$. The demodulation of delta driven GMSK differs from conventional GMSK schemes. This paper proposed a demodulation with the differential phase detector at the end of each bit interval. A designed detector then finds the one of the possible region by hard decision, in which the phase difference lies. Finally the binary data can be recovered by state transition process. Through the BER simulation for AWGN channel, it was found that the proposed demodulation effected by the run length of binary data. The simulated BER degradation of about 2[dB] was analyzed, as compared to the theoretical coherent demodulation with $BT_b$=0.3.