• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1621-1626
• /
• 2003

This study deals with the heat transfer analysis on phase change optical disc with land/groove recording by means of numerical method. Finite difference time domain(FDTD) method was used to obtain the amount of absorption of light propagating inside disc and finite difference element(FEM) method was used to calculate the temperature distribution. The calculated results present the detailed information of recording characteristics on the phase change optical disc. The temperature profiles are quite different between the land track and the groove track. The recorded mark shape on land track is smaller and more elliptic than that on groove track. It is shown that the thermal problem to the neighboring track takes place due to secondary peaks. It is found that the different write strategy should be applied to land and groove recording, respectively.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.34-41
• /
• 2005

We report some recent results in the rewritable Blu-ray Disc with enhanced overwrite cyclability by using the growth dominant eutectic based Ge(Sb70Te30)+Sb recording layer, GeN interface layer and write strategy optimization. We have developed phase-change optical media with appropriate write strategy for 36(i.e., 1X)-72Mbps(i.e., 2X) dual speed Blu-ray Disc system and fur the future high speed optical data storage. For recording layer, eutectic-based Ge(Sb70Te30)+Sb material was used and Sb/Te ratio and Ge content were optimized to obtain proper erasability and archival stability of recorded amorphous marks. The recording layer is wrapped up in GeN interface layers to obtain overwrite cyclability and higher crystallization speed. In addition, we designed appropriate write strategy so called Time-Shifted Multipulse (TSMP) write strategy where starting position of multipulse parts are shined from reference clock. With this write strategy, the jitter characteristics of the disc was improved and we found that leading edge jitter was improved much more than trailing edge jitter in 1X-2X speed recording. Finally, we investigated the higher speed feasibility of 144Mbps(i.e., 4X) by adopting some elemental doping to the eutectic based Ag-In-Sb-Te recording layer and structural optimization of constitution layers in Blu-ray Disc. In the paper, we report the effect of Sn addition for the feasibility of higher speed recording. The addition of Sn shows increases of the crystallization speed of phase change recording layer.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.72-73
• /
• 2001

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.229-236
• /
• 1995

Multimedia has created a system environment that needs a combination of diverse peripherals, faster I/O, and easier configuration. The sheer volume of data one can expect with multimedia hardware and applications storage systems of higher capacity and faster data transfer rate. Unlike the magneto-optical(MO)disk technology which uses bias magnetic field in writing, both the reading and the writing in the phase change (PC) technology are performed only by laser light. In PC optical media, an active layer is reversibly converted between amorphous state and crystalline state by changing irradiation conditions of focused laser beam. Thus, as compared with MO disk, the PC disk has such great advantages that signals can be reproduced by change of reflectance of laser beams in the same manner as the compact disc. The reflectivity of a phase-change spot can be altered in a single pass under the head only through modulation of laser power. The principles and the current status of phase-change optical recording media combined with possible applications are discussed in the present article.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.196-200
• /
• 2006

We are developing a phase change etching technology using an inorganic photoresist of GeSbTe film which is the recording material of the phase change disc. A selective etching phenomenon between amorphous and crystalline states can be utilized with an alkaline etchant. Phase-change pits could be formed using this technique, in which the etching selectivity is strongly dependent on the concentration of the etchant. The degree of etching was investigated by the transmittance between crystalline and amorphous films after the wet-etching. The pits patterned on the disc could be observed by AFM after wet-etching.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.452-457
• /
• 2003

An add-on type output regulator is proposed in this paper. By an add-on controller we mean an additional controller which operates harmonically with a pre-designed one. The role of the add-on controller is to reject a sinusoidal disturbance of unknown magnitude and phase but with known frequency. Advantages of the proposed controller include that (1) it can be used only when the performance of disturbance rejection needs to be enhanced, (2) when it is turned on or off, unwanted transient can be avoided (i.e., bumpless transfer), (3) it is designed for perfect disturbance rejection not just for disturbance reduction, (4) ability for perfect rejection is preserved even with uncertain plant model. This design may be promising for optical disc drive (ODD) systems in which disc eccentricity results in a sinusoidal disturbance. For ODD systems, the sensitivity function obtained by the pre-designed controller, which may have been designed by the lead-lag, $H_{\infty}$, or DOB (disturbance observer) technique, does not change much with the add-on controller except at the frequency of the disturbance. Since the add-on controller does the job of rejecting major eccentricity disturbance, the gain of the pre-designed controller does not have to be too high.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.78-83
• /
• 2005

The Blu-ray disc as a next generation high density optical medium uses an objective lens of high numerical aperture(NA 0.85) and blue laser in order to increase the recording density. The double layer is also useful for doubling the density. The spherical aberration of Blu-ray disc is very sensitive to the thickness of the disk because of high numerical aperture. This paper suggests a method to compensate the spherical aberration caused by the change of disk thickness, by using the Liquid Crystal lens instead of the Liquid Crystal panel. It was possible to develop both the LC panel generating the optical phase difference and LC lens changing the optical power. In this paper, we analyzed the aberration performance and a position sensitivity of the two type LC elements when the samples deviate from the optical axis of the objective lens. The results of applying this analysis show that the LC lenses rather than the LC panels have a significant assembling tolerance. The theoretical characteristics of the two elements are calculated and compared with the measurement data.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권3호
• /
• pp.289-294
• /
• 1997

디지탈 비디오 디스크의 약어로 지칭되는 DVD는 현대 과학이 이루어낸 레이저 광에 의한 정보의 기록과 재생을 한층 승화시킨 차세대 package형 광 기록 매체이다. 앞으로 이 제품군은 기존에 분리되어 있던 가전과 컴퓨터의 응용분야를 이어주는 교량역할을 할 새로운 개념의 상품으로 기대된다. 본 고에서는 DVD의 기술적 배경 및 이의 구현을 위해 활용된 요소기술, 그리고 미래기술로의 흐름에 관해 소개고자 한다.

• 한국광학회지
• /
• 제10권6호
• /
• pp.443-447
• /
• 1999

본 연구에서는 shaded spodizer가 광학 디스크 시스템의 재생신호에 미치는 영향을 조사하기 위하여 동의 중앙에서 가장자리로 갈수록 진폭이 단조 감소하는 shaded spodizer와 진폭이 단조 증가하는 shaded spodizer를 스칼라 회절 이론을 사용하여 고려하였다. 또한 bump 형태 변화에 따른 재생 신호의 변화를 조사하기 위하여, 원통형, 준원추형, 그리고 원추형 bump를 고려하였으며, 이때 bump의 높이는 $\lambda/4$로서, 위상 높이가 $\pi$가 되도록 하였다. 동의 중앙에서 가장 자리로 갈수록 진폭이 단조 감소하는 shaded spodizer의 경우에는 bump 반경이 증가함에 따라 재생 신호가 증가하여 극대값을 가진 후 감소하는 경향이 나타났으며, 진폭이 단조 증가하는 shaded spodizer의 경우에는 bump 반경이 작은 영역과 큰 영역에서 극대값을 갖는 특성을 나타냈다. 도한 구면수차를 0.5λ 포함하는 광학 디스크 시스템의 경우 진폭이 단조 감소하는 shaded spodizer의 최대 재생 신호가 spodizer를 사용하지 않은 경우의 최대 재생 신호보다 크게 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.203-206
• /
• 2004

For the realization of PRAM, $Ge_2Sb_2Te_5$ (GST) has been employed for the phase transition between the crystal and amorphous states by electrical joule heating. Although there has been a vast amount of results concerning the GST in material aspect for the laser-induced optical storage disc applications, the process-related issues of GST for the PRAM applications have not been reported. In this work, the etching behaviors of GST were investigated when the processing conditions were varied in the high-density helicon plasma. The etching parameters of RF main power, RF bias power, and chamber pressure were fixed at 600 W, 150 W, and 5 mTorr, respectively. For the etching processes, gas mixtures of $Ar/Cl_2$, $Ar/CF_4$, and $Ar/CHF_3$ were employed, in which the etching rates and etching selectivities of GST thin film in given gas mixtures were evaluated. From obtained results, it is found that we can arbitrarily design the etching process according to given cell structures and material combinations for PRAM cell fabrications.