• 소성∙가공
• /
• 제12권4호
• /
• pp.284-289
• /
• 2003

The effects of nitrogen on the deformation behavior of duplex stainless steel have been studied. The variation of strength was correlated with the characteristic microstructures pertaining to nitrogen. Analysis based on Hall-fetch relation confirmed that nitrogen enhances phase-boundary strengthening effect. The evolution of dislocation structure, slip traces and misorientation distribution during deformation were also characterized to elucidate the effect of nitrogen on inelastic deformation mechanism. It has been verified in this study that the higher nitrogen content provides a dual-phase microstructure with smaller strength difference between austenite and ferrite resulting into the earlier transfer of inelastic deformation from austenite to ferrite.

• 공업화학
• /
• 제8권4호
• /
• pp.617-623
• /
• 1997

폴리솔베이트-핵산올-물의 3성분계의 상거동에 관한 메카니즘을 조사한 것으로, 등방성인 미셀영역에서 비등방성인 모자이크 액정상을 편광현미경에 의해 관찰하였다. 액정상 및 다른 상들은 약 20~70 wt% 범위에서 관측되었으며, 이 영역에서는 보다 안정한 유화계나 분산계의 포뮬레이션에 대한 기본적인 데이터를 제공할 수 있다. 알킬기의 탄소수 증가에 따라 3상 영역이 감소한 반면에, 2상 영역이 증가되었으며 비등방성 액정상은 관찰되지 않았다.

• 한국재료학회지
• /
• 제26권4호
• /
• pp.200-206
• /
• 2016

This study was carried out to investigate the effect of W substitution on the precipitation behavior of ${\chi}$ and ${\sigma}$ phases in super duplex stainless steel. The ${\chi}$ phase was precipitated at the interface of ferrite / austenite phases and inside the ferrite phase at the initial stage of aging. With an increase in the aging time, the volume fraction of the ${\chi}$ phase increased, and then decreased with the transformation from the ${\chi}$ phase to the ${\sigma}$ phase. The ${\sigma}$ phase was precipitated later than the ${\chi}$ phase, and the volume fraction of x phase increased with the increase in the aging time. The ferrite phase was decomposed into the new austenite (${\gamma}2$) and ${\sigma}$ phases by aging treatment. The decomposition of the ferrite phase into the ${\gamma}2$ and ${\sigma}$ phases was retarded by W substitution for Mo. The volume fraction of the ${\chi}$ phase increased and that of the ${\sigma}$ phase decreased due to W substitution. The ${\chi}$ and ${\sigma}$ phases were intermetallic compounds, which had lower nickel concentration, and higher chromium, molybdenum, and tungsten concentrations. The ${\chi}$ phase has higher molybdenum and tungsten concentrations than those of the ${\sigma}$ phase. The amounts of chromium and nickel in the ${\chi}$ and ${\sigma}$ phases did not change, but these phases have higher concentrations of molybdenum and tungsten due to W substitution for Mo.

• Steel and Composite Structures
• /
• 제36권5호
• /
• pp.521-531
• /
• 2020

The behavior variation of concrete dam is investigated, based on a new method for analyzing the data model of concrete dam in service process for the limitation of wavelet transform for solving concrete dam service process model. The study takes into account the time and position of behavior change during the process of concrete dam service. There is no dependence on the effect quantity for overcoming the shortcomings of the traditional identification method. The panel data model is firstly proposed for analyzing the behavior change of composite concrete dam. The change-point theory is used to identify whether the behavior of concrete dams changes during service. The phase space reconstruction technique is used to reconstruct the phase plane of the trend effect component. The time dimension method is used to solve the construction of multi-transformation model of composite panel data. An existing 76.3-m-high dam is used to investigate some key issues on the behavior change. Emphasis is placed on conversion time and location for three time periods consistent with the practical analysis report for evaluating the validity of the analysis method of the behavior variation of concrete dams presented in this paper.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.313-316
• /
• 2011

초음속 유동과 2상 유동이 공존하는 화염유도로 내 유동해석을 위한 사전 해석검증의 일환으로, 초음속 단상 노즐 플룸의 2차원 축대칭 해석과 물 분사가 포함된 3차원 2상 아음속 유동을 해석하였다. 단상초음속 노즐 플룸의 경우 충격파 셀 구조를 통해 물리적으로 위배되는 현상은 발견되지 않았다. 물분사가 포함된 3차원 2상 아음속 유동의 경우, 액적의 거동과 기화 과정을 정성적으로 볼 수 있었으며 물 분사시 고온공기의 냉각 모사가 가능함을 확인할 수 있었다. 이들 기초 검증 결과들은 추후 초음속 2상 물분사 플룸 유동에 적용되어 3차원 화염유도로 해석에 응용될 예정이다.

• 농약과학회지
• /
• 제12권4호
• /
• pp.397-402
• /
• 2008

Emamectin benzoate와 pyridaben에 대한 담배가루이의 잔효성과 섭식행동의 상관관계를 조사하였다. EPG의 파형은 non-probe time과 phloem phase time과 같은 파형을 신호개시 후 3시간 동안 기록하여 분석하였다. EPG 파형 중 non-probe time과 phloem phase time의 두 파형과 emamectin benzoate와 Pyridaben의 두 약제 간 잔효성의 상관관계 분석에서 모두 상관관계가 있는 것으로 나타났다. 잔효성은 두 약제 모두 2일까지는 50%로 비슷하였으나, 그 이후로는 pyridaben보다 emamectin benzoate가 급격히 감소하였다. EPG를 이용한 두 약제의 잔효성에 따른 구침을 찌른 시간과 체관부 섭식행동은 9일 이후부터 증가하는 경향을 보였으며, emamectin benzoate가 pyridaben보다 증가하는 속도가 빨랐다.

• 한국분말재료학회지
• /
• 제14권2호
• /
• pp.123-126
• /
• 2007

In this work, the dispersion behavior of $Y_2O_3$ particles in binary aluminum (Al)-copper (Cu) cast alloy was investigated with respect to Cu contents of 20 (hypoeutertic), 33 (eutectic) and 40 (hypereutectic) wt.%. In cases of hypo and hypereutectic compositions, SEM images revealed that the primary Al and ${\theta}$ phases were grown up at the beginning, respectively, and thereafter the eutectic phase was solidified. In addition, it was found that some of $Y_2O_3$ particles can be dispersed into the primary Al phase, but none of them are is observed inside the primary 6 phase. This different dispersion behavior of $Y_2O_3$ particles is probably due to the difference in the val- ues of specific gravity between $Y_2O_3$ particles and primary phases. At eutectic composition, $Y_2O_3$ particles were well dispersed in the matrix since there is few primary phases acting as an impediment site for particle dispersion during solidification. Based on the experimental results, it is concluded that $Y_2O_3$ particles are mostly dispersed into the eutectic phase in binary Al-Cu alloy system.

• Nuclear Engineering and Technology
• /
• 제41권10호
• /
• pp.1263-1274
• /
• 2009

Several experimental tests to simulate a reflood phase of a cold-leg LBLOCA of the APR1400 have been performed using the ATLAS facility. This paper describes the related experimental results with respect to the thermal-hydraulic behavior in the core and the system-core interactions during the reflood phase of the cold-leg LBLOCA conditions. The present descriptions will be focused on the LB-CL-09, LB-CL-11, LB-CL-14, and LB-CL-15 tests performed using the ATLAS. The LB-CL-09 is an integral effect test with conservative boundary condition; the LB-CL-11 and -14 are integral effect tests with realistic boundary conditions, and the LB-CL-15 is a separated effect test. The objectives of these tests are to investigate the thermal-hydraulic behavior during an entire reflood phase and to provide reliable experimental data for validating the LBLOCA analysis methodology for the APR1400. The initial and boundary conditions were obtained by applying scaling ratios to the MARS simulation results for the LBLOCA scenario of the APR1400. The ECC water flow rate from the safety injection tanks and the decay heat were simulated from the start of the reflood phase. The simulated core power was controlled to be 1.2 times that of the ANS-73 decay heat curve for LB-CL-09 and 1.02 times that of the ANS-79 decay curve for LB-CL-11, -14, and -15. The simulated ECC water flow rate from the high pressure safety injection pump was 0.32 kg/s. The present experimental data showed that the cladding temperature behavior is closely related to the collapsed water level in the core and the downcomer.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.364-371
• /
• 2007

본 연구에서는 연속상의 종류가 AOT 계면활성제 시스템의 water-in-oil(W/O) 마이크로에멀젼을 이용한 할로겐화은 나노입자 제조에 미치는 영향에 관하여 살펴보았다. 이를 위하여 계면활성제, 연속상 오일, 무기염 수용액으로 이루어진 삼성분 시스템에 대하여 탄화수소의 연속상 종류를 변화하면서 상평형 실험을 수행한 결과, 탄화수소의 사슬 길이가 증가함에 따라 계면활성제 시스템의 친수성이 증가하여 단일상으로 존재하는 W/O 마이크로에멀젼 영역은 증가하였다. 상평형 실험결과에 의하여 결정된 단일상의 영역 내에서 W/O 마이크로에멀젼을 이용하여 할로겐화은 나노입자를 제조한 결과, 10 nm 전후의 구형에 가까운 비교적 균일한 입자가 형성되었다. 사용한 연속상 탄화수소의 사슬 길이가 증가할수록 마이크로에멀젼의 film rigidity를 감소시킴에 따라 마이크로에멀젼 사이의 교환 속도가 빨라져서 생성된 할로겐화은 나노입자의 크기는 작아지고 반면에 개수는 증가하였다. 또한 동일한 시스템에서 무기염 수용액의 조성을 증가시킴에 따라 생성된 나노입자의 크기는 증가함을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.13-18
• /
• 2006

Ti-8Ta-3Nb, as a new biomaterial, was prepared by cast and swaging process. Their deformation behavior of Ti-8Ta-3Nb alloy has been characterized on the basis of its flow stress variation obtained from the true strain rate compression testing in the temperature of $700-900^{\circ}C$ and strain rate of $0.001-10\;s^{-1}$. At the strain rates lower than $0.1\;s^{-1}$ and the all temperature ranges which consist of two phase ${\alpha}+{\beta}$ as well as single ${\beta}$ phase fields, the flow curves show a small degree of flow softening behavior. In contrast, the shapes of the flow curves at other strain rates indicate unstable behavior. The shapes of the flow curves were similar in both as-cast and swaged specimen as well as in both ${\alpha}+{\beta}$ phase and ${\beta}$ phase. The flow stress data did not obey the kinetic rate equation over the entire regime of testing but a good fit has been obtained in the intermediate range of temperatures ($750-850^{\circ}C$). In this range, a stress exponent value of about 7.7 in as-cast specimens and about 6.2 in swaged specimens with an apparent activation energy of about 300 kJ/mol and about 206 kJ/mol respectively have been evaluated.