• 대한한방부인과학회지
• /
• 제19권1호
• /
• pp.261-271
• /
• 2006

Purpose : Dysmenorrhea which repeat every menstrual phase give complaints like pain, vomiting, nasal bleeding and etc. But in many textbooks pathogenesis and treatment process of dysmenorrhea obscure. So the purpose of this study is to identify the conception, pathogenesis and treatment process of dysmenorrhea. Methods : After catching the limitations of preexistence theory about dysmenorrhea, I show a meaningful argument of dysmenorrhea. Results : The conception, pathogenesis and treatment process of dysmenorrhea are like this. Dysmenorrhea which occurs for menstrual phase can make deficiency of blood. There are intimate relations between uterine function and the five Zang-organs, especially heart, spleen and liver, so menstruation induces the weakness of those organs. And the insufficiency of kidney and conception-thorough vessel which have control over the uterine function can make dysmenorrhea. Conclusion : The deficiency of kidney which is responsible for holding Qi breaks down the balance of Zang-organs Yin-Yang, then dysmenorrhea appears through Zang-organs weakness of heart, spleen and liver. For the treatment of dysmenorrhea, we should consider preferentially the deficiency of kidney, afterward Bianzheng Lunzhi of the Zang-fu organs.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1176-1189
• /
• 2016

In this paper, a novel quasi-direct power control (Q-DPC) scheme based on a resonant frequency adaptive proportional-resonant (PR) current controller with a variable frequency resonant phase locked loop (RPLL) is proposed, which can achieve a fast power response with a unity power factor. It can also adapt to variations of the generator frequency in T-type Three-level shaft synchronous generator (SSG) converters. The PR controller under the static α-β frame is designed to track ac signals and to avert the strong cross coupling under the rotating d-q frame. The fundamental frequency can be precisely acquired by a RPLL from the generator terminal voltage which is distorted by harmonics. Thus, the resonant frequency of the PR controller can be confirmed exactly with optimized performance. Based on an instantaneous power balance, the load power feed-forward is added to the power command to improve the anti-disturbance performance of the dc-link. Simulations based on MATLAB/Simulink and experimental results obtained from a 75kW prototype validate the correctness and effectiveness of the proposed control scheme.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.169-174
• /
• 2017

In this work, lithium ferrite ($Li_{0.5}Fe_{2.5}O_4$) nanoparticles were prepared via mechanochemical processing and subsequent heat treatment at a relatively low ($600^{\circ}C$) calcining temperature. The raw materials used were high purity $Fe_2O_3$ and $Li_2CO_3$ that were milled for between 2 and 20 h. The milled powders were then calcined at temperatures of 500 and $600^{\circ}C$ for 5 h in air. XRD results show that optimum conditions to obtain single phase lithium ferrite nanoparticles with a mean crystallite size of about 23 nm, using Scherrer's formula, are 10 h milling and calcination at $600^{\circ}C$. Saturation magnetization and coercivity of the single phase Li ferrite nanoparticles are 44.6 emu/g and 100 Oe respectively, which are both smaller than those of the bulk Li ferrite. The Curie temperature of the single sample was determined by a Faraday balance, which is $578^{\circ}C$ and smaller than that of bulk Li ferrite.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.695-703
• /
• 2014

In this paper, a fault detection scheme for DC-link voltage sensor and its fault tolerant control strategy for three-phase AC/DC/AC PWM converters are proposed, where the Luenberger observer is applied to estimate the DC-link voltage. The Luenberger observer is based on a converter model, which is derived from the voltage equations of a grid-side converter and the power balance on a DC link. A fault of the voltage sensor is detected by comparing the measured value of the DC-link voltage with the estimated one. When a sensor fault is detected, a fault tolerant control strategy is performed, where the estimated DC-link voltage is used for the feedback control. The estimation error from the observer is about 1.5 V, which is sufficiently accurate for feedback control. In addition, it is shown that the observer performance is robust to parameter variations of the converter. The validity of the proposed method has been verified by simulation and experimental results.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.150.2-150.2
• /
• 2013

We elucidate the mechanism of the self-assembled organic layer formation at the organic/metal interface of hexaaza-triphenylene-hexacarbonitrile (HATCN)/Au(111) by first-principles calculations and Lowtemperature scanning tunneling microscope (STM). In this work, we used HATCN to deposit organic material which is well known as an efficient OLED charge generation material. Low-temperature STM measurements revealed that self-assembled hexagonal porous structure is formed at terraces of Au(111). We also found that the hexagonal porous structure has chirality and forms only small (<1000 $nm^2$) phaseseparated chiral domains that can easily change their chiral phase in subsequence STM images at 80 K. To explain the mechanism of these observation, we calculated the molecular-molecular and molecule-surface interaction energies by using density functional theory method. We found that the change of their chiral phase resulted from the competition between the two energies. These results have not only verified our experimental observations, but also revealed the delicate balance between different interactions that caused the self-assembed structures at the surface.

• 한국주조공학회지
• /
• 제42권6호
• /
• pp.392-397
• /
• 2022

In order to compliant the stringent exhaust emission regulations, higher fuel efficiency and cleaner exhaust gas in combustion engines have been required. To improve combustion efficiency, an exhaust gas temperature is increasing, therefore higher temperature resistance is required for components in exhaust system, especially turbine wheel in turbocharger. IN100 looks quite attractive candidate as it has high temperature properties with low density, however it has low castability due to poor ductility at high temperature. In this study, the balance of Al and Ti composition was optimized from the base alloy IN100 to improve the high temperature ductility by expanding the γ single phase region below the solidification temperature, while obtaining the high temperature strength by maintaining the volume fraction of γ' phase equivalent to IN100 around 1000℃. Furthermore, the high temperature creep rupture life increased by adding a small amount of Ta. The alloy developed in this study has high castability, low density and high specific strength at high temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.255-256
• /
• 2006

In this paper, we investigated the. characteristics of fault current limiting according to fault angle in the integrated three-phase flux-lock type SFCL in fault types such as the single-line-to-ground fault, the double-line-to-ground fault and the three-line-to-ground fault. When the SFCL is operating under normal condition, the magnetic flux generated between primary and secondary coils of each single phase is canceled out perfectly, so that the impedance of the SFCL is also not generated and the power system can be operated normally without any loss, However, if a fault occurs even in any phase out of three phases, quench happened in SFCL elements and the current flowing secondary coil is restricted abruptly. Finally, the balance of magnetic flux in whole SFCL system is destroyed, and the fault currents in every phase could be limited at the same time irrespective of the fault types. As a result, the developed SFCL in this study were operated normally as expected and the purpose of the integration of 3 phase current limiting was also achieved successfully. However, the fault current limiting characteristics of the SFCL was dependant on the quench characteristics of HTSC elements in each phase, and it was expected that the improvement of the SFCL could be possible through the introduction of HTSC elements which have better critical characteristics.

• Journal of Animal Science and Technology
• /
• 제64권5호
• /
• pp.871-884
• /
• 2022

Two experiments were conducted to evaluate the effects of calcium (Ca) levels in weanling pigs (Landrace × Yorkshire × Duroc). In experiment 1, one hundred and eighty weanling pigs were randomly allotted to one of the three treatments. The treatments were low (Ca 0.60% in phase 1 and 0.50% in phase 2), standard (Ca 0.72% in phase 1 and 0.66% in phase 2), and high (Ca 0.84% in phase 1 and 0.72% in phase 2). In experiment 2, hundred and forty weanling pigs were randomly assigned to one of four treatments differing in Ca levels (high and low) and sources (CaCl₂ and CaCO₃) in a 2 × 2 factorial arrangement. There were 10 pigs per replicate in both experiments, with 6 replicates in each treatment, and they were conducted in two phases (phase 1, days 0-14; phase 2, days 15-28). In experiment 1, body weight (BW), average daily gain (ADG), and growth to feed ratio (G/F) increased as the Ca level decreased (p < 0.05). P digestibility was higher in the low-Ca diet group than in the high-Ca diet group (p <0.05). In experiment 2, the final BW, ADG, and G/F increased in the CaCl₂ diet group compared with the case in the CaCO₃ diet group (p < 0.05). The digestibility of crude protein (CP), Ca, and P was higher in the CaCl₂ diet group than in the CaCO₃ diet group (p < 0.05). Cl^- levels were higher in the CaCl₂ diet group than in the CaCO₃ diet group (p < 0.05). The bicarbonate (HCO_3-), base excess (BE), and electrolyte balance (EB) levels were lower in the CaCl₂ diet group than in the CaCO₃ diet group (p < 0.05). Hematocrit increased as the Ca level decreased (p < 0.05). The HCO_3- interacted with the Ca sources and thus, affected the Ca levels (p < 0.05). Bone ash, Ca, and P were downregulated in the low-Ca diet group compared with the case in the high-Ca diet group. Overall, the low dietary Ca supplementation led to greater growth performance. Furthermore, CaCl₂ appeared to be a better Ca source than CaCO₃ because of the greater digestibility of CP, Ca, and P, and improved EB.

• 한국실내디자인학회논문집
• /
• 제26권3호
• /
• pp.81-90
• /
• 2017

Subsidiary welfare facilities in an apartment complex are one of the most important factors for consumers when they buy an apartment due to an increase of consumers' consciousness level, increase of leisure time, and increase of cultural life. This study aims to analyze layout types and characteristics of subsidiary welfare facilities at the apartment complexes in the second phase new towns, investigate the current situation and find out the improvement direction. For this purpose, this author investigated three "second phase new towns" which were designated as a new town at similar time, and selected a total of 15 apartment complexes by selecting 5 complexes in each of the three new towns. Literature survey, case visit, photo shoot, user observation survey were used as study methods. The results of the study are as follows. First, it was found that a mixed type was the most common type of plane layout types in the subsidiary welfare facilities. This type improves accessibility and equity of the residents as the facilities are appropriately placed based on the functions and the user characteristics. Second, it can be considered that a distributed type for senior citizen centers and daycare centers may give independence to specific users, but it may give a sense of alienation to the elderly. Moreover, it does not have enough community so that it is necessary to make proper supplementation. Third, there were two lay out types. The first one is that the subsidiary welfare facilities are placed with step difference and the second one is that they are placed in sunken places using the underground space. Fourth, all layout types of outdoor facilities are distributed types, and it is considered that measurements for a proper balance of accessibility and equity are required.

• 대한전자공학회논문지TC
• /
• 제47권11호
• /
• pp.69-76
• /
• 2010

본 논문에서는 X-Band 모노펄스 레이더 RF 프론트 엔드에서 국부발진 신호를 동일 진폭, 동일 위상으로 분배하는 도파관 천이 구조를 갖는 4-Way 윌킨슨 분배기 설계에 대해 연구하였다. X-Band에서 동작하는 모노펄스 레이더 프론트 엔드는 합, 방위각 및 고각 신호를 하강변환 하는 3개의 도파관 수신믹서와 체계 연동시 X-Band 시험신호를 발생하는 SSB 도파관 믹서로 구성된다. 프론트 엔드를 구성하는 각 믹서에 국부발진(LO : Local oscillator) 신호를 입력하기 위해서는 저 손실 특성을 가지면서 동일 전력 레벨과 동 위상으로 LO 전력을 분배하는 4-Way 분배기가 요구된다. 본 논문에서는 저 손실, 동위상으로 LO 신호를 분배하기 위해 도파관 천이 구조를 갖는 4-Way 윌킨슨 분배기를 설계/제작 하였다. 제작된 윌킨슨 전력 분배기는 X-Band에서 삽입손실이 평균 6.8dB, VSWR은 1.06~1.28였으며, 이때 각 단자 출력 위상차는 최대 4.5도 이내를 유지하였다.