• 한국환경과학회지
• /
• 제24권2호
• /
• pp.237-244
• /
• 2015

This objectives of research are to figure out combustion characteristics with increasing temperature with petrochemical sludge by adding wasted organic matters which are waste electric wire, anthracite coal and sawdust, and to exam heating value and ignition temperature for using refused derived fuels(RDFs). After analyzing TGA/DTG, petrochemical sludge shows a rapid weight reduction by vaporing of inner moisture after $170^{\circ}C$. Gross weight reduction rate, ignition temperature and combustion rates represent 68.6%, $221.9^{\circ}C$ and 54.1%, respectively. In order to assess the validity of the RDFs, the petrochemical sludge by adding wasted organic matters which are waste electric wire, anthracite coal and waste sawdust. The materials are mixed with 7:3(petrochemical sludge : organic matters)(wt%), and it analyzes after below 10% of moisture content. The ignition temperatures and combustion rates of the waste electric wire, anthracite coal and waste sawdust are $410.6^{\circ}C$, $596.1^{\circ}C$ and $284.1^{\circ}C$, and 85.6%, 30.7% and 88.8% respectively. In heating values, petrochemical sludge is 3,600 kcal/kg. And the heating values of mixed sludge (adding 30% of the waste electric wire, anthracite coal and waste sawdust) each increase up to 4,600 kcal/kg, 4,100 kcal/kg and 4,300 kcal/kg. It improves the ignition temperatures and combustion rates by mixing petrochemical sludge and organic matters. It is considered that the production of RDFs is sufficiently possible by using of petrochemical sludge by mixing wasted organic matters.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.59-65
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for petrochemical basic compound manufacturing (PBCM) and plastics and synthetic resins manufacturing (PSRM) industry. Wastewater discharged from the each category contains high concentration of COD and toluene. Eighteen sites were surveyed and wastewater qualities were analyzed. Six and two different technologies were applied to the PBCM and PSRM industry for the end-of-pipe treatment process, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options: typical activated-sludge process + sand filtration + activated carbon adsorption (PBCM) and wet oxidation + chemical precipitation + typical activated-sludge process + chemical precipitation (PSRM) were selected as the BAT for each industry.

• 한국환경과학회지
• /
• 제9권4호
• /
• pp.351-367
• /
• 2000

Air-lift biofilm reactor should be an admirable process substituting conventional activated sludge process, because of its small area requirement as well as high volumetric loading capacity and stability against loading and chemical shocks. However most of the past research on the performance of ABR was focused on the sewage treatment. This research studied the applicability of ABR to treat high strength wastewater. A bench-scale ABR was operated to treat high strength synthetic wastewater, tannery wastewater and petrochemical wastewater, and its applicability was conclusive In case of synthetic wastewater, ABR showed good performance in which the substarate removal efficiency was higher that 80% even under short HRT(1.4 hr) and high volumetric loading rate(9.3 kgCODcr/$m^3$.day). When ABR was applied to treat tannery wastewater, it was suggested that the maximum volumetric loading rate and F/M ratio should be 7.7kgCODcr/$m^3$.day, 0.76 $day^{-1}$, respectively. And high substrate removal efficiency over than 90 % was observed with 4,000 mgCODcr/L of petrochemical wastewater. Even though effluent concentration was quite high, ABR should be applicable to treat the high strength wastewater, because of its high loading capacity.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.669-678
• /
• 2009

The reduction of excess activated sludge from petrochemical plant was investigated by the electro fenton (E-Fenton) process using electrogenerated hydroxyl radicals which lead to mineralization of activated sludge to $CO_2$, water and inorganic ions. Factors affecting the disintegration efficiency of excess activated sludge in E-Fenton process were examined in terms of five criteria: pH, $H_2O_2/Fe^{2+}$ molar ratio, current density, initial MLSS (mixed liquid suspended solids) concentration, $H_2O_2$ feeding mode. TSS total suspended solid and $TCOD_{cr}$ reduction rate increased with the increasing $H_2O_2/Fe^{2+}$ molar ratio and current density until 42 and $6.7 mA/cm^2$, respectively but further increase of $H_2O_2/Fe^{2+}$ molar ratio and current density would reduce the reduction rate. On the other hand, as expected, increasing pH and initial MLSS concentration of activated sludge decreas TSS and $TCOD_{cr}$ reduction rate. The E-Fenton process was gradually increased during first 30 minutes and then linearly proceed till 120 minutes. The optimal E-Fenton condition showed TSS reduction rate of 62~63% and $TCOD_{cr}$ (total chemical oxygen demand) reduction rate of 55~56%. Molar ratio $H_2O_2/Fe^{2+} = 42$ was determined as optimal E-Fenton condition with initial $Fe^{2+}$ dose of 5.4 mM and current density of $6.7{\sim}13.3 mA/cm^2$, initial MLSS of 7,600 mg/L and pH 2 were chosen as the most efficient E-Fenton condition.

• 한국환경과학회지
• /
• 제19권9호
• /
• pp.1119-1127
• /
• 2010

The behavior of copper throughout the whole process of wastewater treatment plant that uses the activated sludge process to treat the wastewater of petrochemical industry that contains low concentration of copper was investigated. Total inflow rate of wastewater that flows into the aeration tank was $697\;m^3$/day with 0.369 mg/L of copper concentration, that is, total copper influx was 257.2 g/day. The ranges of copper concentrations of the influent to the aeration tank and effluent from the one were 0.315 ~ 0.398 mg/L and 0.159 ~ 0.192 mg/L, respectively. The average removal rate of copper in the aeration tank was 50.8 %. The bioconcentration factor (BCF) of copper by microbes in the aeration tank was 3,320. The accumulated removal rate of copper throughout the activated sludge process was 71.3%, showing a high removal ratio by physical and chemical reactions in addition to biosorption by microbes. The concentration of copper in the solid dehydrated by filter press ranged from 74.8 mg/kg to 77.2 mg/kg and the concentration of copper by elution test of waste was 2.690 ~ 2.920 mg/L. It was judged that the copper concentration in dehydrated solid by bioconcentration could be managed with the control of that in the influent.

• 청정기술
• /
• 제15권3호
• /
• pp.154-164
• /
• 2009

2007년을 기준으로 울산에 위치한 사업장으로부터 발생된 유기성 폐수슬러지의 94%가 해양처분되었다. 유기성 슬러지의 해양처분은 2012년에는 완전 금지될 예정이다. 그러나 아직까지 울산에 위치한 사업장으로 부터의 유기성 슬러지는 소각 이외에 다른 대안이 없는 실정이며, 현재 울산석유화학산업단지의 사업장들은 슬러지의 육상처리 및 처분기술의 확보가 매우 중요한 과제이다. 본 연구에서는 울산의 석유화학사업장 슬러지와 하수처리 슬러지를 연료로 활용하기 위해 건조슬러지와 탄화슬러지의 재료적 측면에 대한 평가를 실시하였다. 연구결과 저위발열량 3,000 kcal/kg이상을 초과하는 테레프탈산, BTX, 프로필렌, 화학섬유 등을 생산하는 사업장으로부터의 건조슬러지와 탄화슬러지는 연료로서의 가능성이 높지만 건조할 경우 2,100 kcal/kg 이하, 탄화할 경우 1,100 kcal/kg 이하인 좀 더 무기성분이 많은 펄프, 제지, 메틸아민, 아마이드 등을 생산하는 사업장의 폐수슬러지는 연료로서의 가치가 적은 것으로 나타났다. 연구결과 대부분의 슬러지들이 에너지 측면에 있어서 탄화보다는 건조가 더 좋은 결과를 보여주었다.

• 한국환경보건학회지
• /
• 제20권3호
• /
• pp.1-12
• /
• 1994

Wastewaters being treated and final effluents were collected from 3 wastewater treatment plants of petrochemical industries, from August 31 to October 4, 1993 in an interval of 10 days, and further analysed by GC/FID to investigate discharge situation and removal efficiency on polycyclic aromatic hydrocarbons. The results were as follows: 1. The PAHs 294.57 $\mu$g/l were discharged in primary treatment effluent of plant A to manufacture vinyl acetate resin and acryl, and removed 54.51% by aeration and totally 84.71%. 2. The PAHs of the highest concentration were discharged in primary treatment effluent of plant B to manufacture PS resin and ABS resin, but removed 91.65% by activated sludge process and 98.19% by activated carbon to discharge PAHs of the lowest concentration comparing to another treatment operations. 3. The PAHs 99.96 $\mu$g/l of the lowest concentration were discharged in wastewater of plant C to manufacture epoxy resin, and removed 80.48% by activated sludge process. 4. B treatment system including activated carbon showed up the best removal efficiency of PAHs. Activated carbon therefore, seems to be effective as tertiary treatment. 5. Correlation coefficient of components to total PAHs was generally low, and correlation coefficients of phenanthrene, pyrene and acenaphthylene to total PAHs were each 0.98, 0.97 and 0.80, respectively. Correlation coefficient of the sum of phenanthrene, pyrene and acenaphthylene to total PAHs was 0.99, so that the sum of phenanthrene, pyrene and acenaphthylene was available as index to estimated total PAHs. 6. Phenanthrene and Chrysene were very well treated biologically and acenaphthylene and fluoranthene were untreated biologically. 7. Considering EPA standards, it seems that the concentration of phenanthrene, pyrene, fluoranthene, and benzo(k)fluoranthene is high level.

• 유기물자원화
• /
• 제11권2호
• /
• pp.66-73
• /
• 2003

석유화학공장폐수 슬러지를 폐석고와 시멘트, fly ash 및 고화제 등을 배합하여 성형하면 시멘트벽돌 및 보통시멘트의 압축강도 기준을 초과함으로 제조된 고화체는 벽돌, 블록, 경량골재, 노반재 등으로 활용이 가능할 것으로 판단되었다. 실험 결과 다음의 결과를 얻었다. 시멘트량을 전체 중량비의 20%인 1.29kg에서 fly ash/슬러지의 배합비의 모든 조건과 시멘트량을 전체 중량비의 15%인 0.9kg에서 fly ash/슬러지의 배합비가 0.31~0.45일 때, 시멘트벽돌 및 보통시멘트의 압축강도 기준을 초과하였다. 제조된 고화체(제품)의 유해성 평가를 위해서 침출수 중의 $Cr^{+6}$, Cu, Zn, Cd, Pb의 용출농도를 실시한 결과 모든 대상시료의 중금속 농도는 배출허용기준치 이내를 유지하여 유해물질로 인한 문제는 없을 것으로 판단되었다. 고화체를 시멘트벽돌 및 보통시멘트에 준해서 활용이 가능한 제조조건에서 제조원가를 조사하였다. 조사결과 자원화시설의 고화체 제조능력을 연간 약 18,000톤을 기준으로 할 때, 총괄원가 및 톤당제조원가는 각각 678,664천원 및 37,704원으로 조사되었다.

• 생명과학회지
• /
• 제23권10호
• /
• pp.1273-1279
• /
• 2013

방향족화합물들로 오염되어있는 토양 및 산업폐수를 포함한 각종 시료로부터 phenol에 분해활성이 높은 56균주를 순수분리 하였으며, 이들 분리 균주 중 균체생육과 phenol 분해활성이 가장 높은 균주인 GN13을 선별하였다. 분리균주 GN13은 형태학적, 생리학적 및 생화학적 특성을 조사한 결과 Neisseria 속 세균과 유사한 것으로 판명되어 최종적으로 Neisseria sp. GN13으로 명명하였다. 분리균주 Neisseria sp. GN13의 균체생육 및 phenol 분해를 위한 최적온도와 최적 pH는 각각 $32^{\circ}C$와 7.0였다. 유일 탄소원으로 phenol 1,000 mg/l를 포함하여 최적화된 배지를 사용한 jar-fermentor 배지에서 배양 30시간에 균체생육이 최대에 이르렀으며 배양 27시간째 거의 모든 phenol이 분해되었으며, catechol deoxygenase 활성측정에 의하여 Neisseria sp. GN13은 meta-와 ortho-pathway를 통하여 catechol 분해가 일어났다. Neisseria sp. GN13은 phenol 함유 인공폐수에서의 phenol 분해율은 배양 30시간 만에 97%의 phenol이 분해되는 것으로 나타났으며, 인공폐수에 대한 Neisseria sp. GN13과 활성슬러지 처리구에서의 TOC 제거효율은 각각 83%와 78%였다. 석유화학폐수에 대한 Neisseria sp. GN13의 COD 제거율은 활성슬러지만을 포함한 대조구보다 약 1.3배 높은 효율을 나타내었다. 이러한 결과로 미루어 분리균주 Neisseria sp. GN13은 phenol을 함유하고 있는 여러 폐수에 효과적으로 적용될 수 있을 것으로 생각된다.

• 대한환경공학회지
• /
• 제22권5호
• /
• pp.837-847
• /
• 2000

고농도의 유기물과 질소성분을 포함하는 맥주공장과 석유화학 산업폐수를 처리하기 위하여 실험실 규모의 혐기/호기 순산소-생물막 공정 (POB)이 이용되었다. 그리고 A/O POB process와 장기폭기법의 경제성분석도 수행되었다. TOC 농도기준으로 70에서 150 mg TOC/L 범위의 맥주공장폐수가 유입되었을 때 TOC 제거율은 각각 92% 이상으로 좋은 효율을 보였다. 석유화학폐수의 경우 초기 TOC제거율은 52%로 매우 낮았지만 32일 이후에는 86%의 TOC 제거율을 나타내었으며, TKN의 제거율은 유입부하가 증가함에도 불구하고 27일 이후에 71%의 제거율로 유지되었다. 순산소 생물막공법은 초기 건설비인 순산소 발생장치 (PSA)와 메디아 설치비가 소요되기 때문에 장기폭기법에 비하여 약 2.9배 정도 높았다. 이에 반해서 순산소 생물막공법은 극히 적은 잉여슬러지 발생량과 슬러지의 재순환의 불필요, 낮은 에너지 소요량 등의 많은 장점들로 인하여 운전비와 유지비가 약 2.5배 정도 장기폭기법 보다 적었다. 그러므로 장기적인 측면에서 보면 순산소 생물막공법이 높은 처리효율을 가지면서도 장기폭기법보다 경제적인 것으로 생각된다.