• Journal of Plant Biotechnology
• /
• v.32 no.2
• /
• pp.105-109
• /
• 2005

To enhance salidroside productivity from a cell suspension cultures of Rhodiola sachalinensis, various combinations of auxin (NAA) and cytokinins (BA, Kinetin) concentration and addition of $GA_3$, TDZ, zeatin, spermine and spermidine at a hormone combination to be established were examined. NAA/BA combination is superior to NAA/kinetin combination in biomass and salidroside content. Maximum salidroside production ($64.6{\pm}8.9\;mg/L$ medium) was obtained from $2B_5$ medium with 1 mg/L NAA and 5 mg/L BA. The adding of $GA_3$ ($0.01\;mg/L{\sim}5\;mg/L$) was beneficial for salidroside accumulation and the highest productivity of salidroside, $90.3{\pm}8.34\;mg/L$, was obtained from $2B_5$ medium supplemented with 1 mg/L NAA, 5 mg/L BA and 0.1 mg/L $GA_3$. On TDZ, zeatin, spermine and spermidine, expectant results were not obtained except a little affirmative effect of spermidine ($69{\pm}2.88$ at 1 mg/L).

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.79-88
• /
• 2018

This study presents an evaluation method to estimate the damage scale of chemical storage tank of petrochemical plant due to the earthquake that is likely to occur among NaTech damage types. Based on this, the risk for damage reduction of chemical storage tanks was evaluated. As a result of the study, the risk of the storage tank increased greatly considering the earthquake, and the risk was greatly reduced as a result of evaluating the proposed measures to mitigate the damage impact on the earthquake. This study is expected to contribute to the research on the reduction of NaTech damages such as typhoons and thunderstorms as well as earthquakes, and to establish an emergency response plan. In the future, it is necessary to systematically study and institutionalize the risk reduction measures considering earthquakes.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.166-171
• /
• 2004

Since early 1950's fracture mechanics has brought significant impact on structural integrity assessment in a wide range of industries such as power, transportation, civil and petrochemical industries, especially in nuclear power plant industries. For the last two decades, significant efforts have been devoted in developing defect assessment procedures, from which various fitness-for-purpose or fitness-for-service codes have been developed. From another aspect, recent advances in IT (Information Technologies) bring rapid changes in various engineering fields. IT enables people to share information through network and thus provides concurrent working environment without limitations of working places. For this reason, a network system based on internet or intranet bas been appeared in various fields of business. Evaluating the integrity of structures is one of the most critical issues in nuclear industry. In order to evaluate the integrity of structures, a complicated and collaborative procedure is required including regular in-service inspection, fracture mechanics analysis, etc. And thus, experts in different fields have to cooperate to resolve the integrity problem. In this paper, an internet-based cooperative system for integrity evaluation system which adapts IT into a structural integrity evaluation procedure for reactor pressure vessel is introduced. The proposed system uses Virtual Reality (VR) technique, Virtual Network Computing (VNC) and agent programs. This system is able to support 3-dimensional virtual reality environment and to provide experts to cooperate by accessing related data through internet.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.449-458
• /
• 2007

In this paper, we reconstructed the cross-sectional images of two phantoms simulating a petrochemical process from gamma radiation measurements. Three different weight functions for EM image reconstruction algorithm were built and compared with histograms representing the variance of the homogeneity of the phantom material, The radiation source, $^{137}Cs$, collimated by a lead with 5 mm diameter aperture and the measurement was made with a lead shielded 1inch NaI detector. As a result, the method taking into account the beam area in each pixel for a weight function showed the best resolution among the three methods.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.17-24
• /
• 2009

For the biosurfactant production process at first Candida bombicola, Sphingomonas yanoikuyae, Sphingomonas chungbukensis and Myxococcus flavescens were studied. As the most productive microorganisms C. bombicola, S. yanoikuyae and S. chungbukensis were selected. During many petrochemical industrial processes variable volatile organic componds are produced and they can cause an unpleasent and unhealthy atmosphere. Usually the volatile organic compounds are treated with chemical detergents. The chemical detergents cannot be easily degradable and can be accumulated in the nature. In this study we tried to develop a production process for the biosurfactants, which can substitute some chemical detergents in some chemical processes, with microorganisms. At second the treatment of the volatile organic compounds with the biosurfactants were tested and compared with the treatment with chemical detergent. The production productivities of the biosurfactant with microorganisms were compared. The growth patterns and kinetics of the microbial cells and the surface tension values of the biosurfactants were studied. The changes of the surface tension in variable pH conditions and sodium chloride concentrations were also studied. The volatile organic carbons were treated in a small plant scale. As the result of this study, it indicated that the specific growth rate of S. chungbukensis was the fastest by 0.144 ($hr^{-1}$). For surface tension, C. bombicola (38.1 dyne/cm) had the lowest value, and solubility of the volatile organic carbon was similar in C. bombicola and S. chungbukensis. (Toluene: about 0.1 Unit, Chloroform: about 0.6${\sim}$0.7 Unit, Benzene: about 0.5${\sim}$0.8 Unit). The biosurfactant, which were produced by C. bombicola, was selected for the further study for the volatile organic carbon treatment. With the biosurfactans from C. bombicola could remove the volatile organic carbon about 80% and this removal rate can be comparable with chemical detergent.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.20-30
• /
• 2010

In this paper, a new tomographic scan method with fixed installed detectors and rotating source from gamma projector was presented to diagnose the industrial plants which were impossible to be examined by conventional tomographic systems. Weight matrix calculation method which was suitable for volumetric detector and statistical iterative reconstruction method were applied for reconstructing the simulation and experimental data. Monte Carlo simulations had been performed for two kinds of phantoms. Lab scale experiment with a same condition as one of phantoms, had been carried out. Simulation results showed that reconstruction from photopeak counting measurement gave the better results than from the gross counting measurement although photopeak counting measurement had large statistical errors. Experimental data showed the similar result as Monte Carlo simulation. Those results appeared to be promising for industrial tomographic applications, especially for petrochemical industries.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.55-60
• /
• 2012

The energy conservation and exergy loss of a fully thermally coupled distillation commercialized as the divided wall column are compared with those of a conventional two-column system for ternary separation. The used example for the comparison is the benzene-toluene-m-xylene separation process widely used in a petrochemical plant. The design procedure of the fully thermally coupled distillation column is explained, and the energy requirement is compared using the HYSYS. When the same numbers of trays are utilized, the fully thermally coupled distillation column uses 28.2% less energy and 10.4% more exergy loss. The increase of the exergy loss is due to the additional mixing from the bidirectional inter-linking and the temperature elevation in the reboiler from the increased pressure at the bottom of the main column.

• Safety and Health at Work
• /
• v.9 no.3
• /
• pp.296-307
• /
• 2018

Background: Safety culture, acting as the oil necessary in an efficient safety management system, has its own weaknesses in the current conceptualization and utilization in practice. As a new approach, resilience safety culture (RSC) has been proposed to reduce these weaknesses and improve safety culture; however, it requires a valid and reliable instrument to be measured. This study aimed at evaluating the reliability and validity of such an instrument in measuring the RSC in sociotechnical systems. Methods: The researchers designed an instrument based on resilience engineering principles and safety culture as the first instrument to measure the RSC. The RSC instrument was distributed among 354 staff members from 12 units of an anonymous petrochemical plant through hand delivery. Content validity, confirmatory, and exploratory factor analysis were used to examine the construct validity, and Cronbach alpha and test-retest were employed to examine the reliability of the instrument. Results: The results of the content validity index and content validity ratio were calculated as 0.97 and 0.83, respectively. The explanatory factor analysis showed 14 factors with 68.29% total variance and 0.88 Kaiser-Meyer-Olkin index. The results were also confirmed with confirmatory factor analysis (relative Chi-square = 2453.49, Root Mean Square Error of Approximation = 0.04). The reliability of the RSC instrument, as measured by internal consistency, was found to be satisfactory (Cronbach ${\alpha}=0.94$). The results of test-retest reliability was r = 0.85, p < 0.001. Conclusion: The results of the study suggest that the measure shows acceptable validity and reliability.

• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.15-23
• /
• 2012

Indirect Test Method is often used instead of direct test method in test method for extinguishing performance of $CO_2$ extinguishing facility because of high cost, environment problems and difficulties of procedure. But in the danger facilities for a unit of nation, such as a petrochemical plant, a nuclear power plant, or etc. is better to verify the performance of the extinguishment through direct discharge test. In $CO_2$ extinguishing system for total flooding system installed in dangerous facilities in Korea, each protected area in surface fire and deep-seated fire had selected and verified of extinguishing performance of $CO_2$ extinguishing facilities. To get recognized as extinguishing performance, discharged $CO_2$ concentration to protected area should be equivalence with design concentration standards (NFSC and NFPA). The Design Concentration means that $CO_2$ extinguishing agent is considerate of concentration for percentage of allowance (20 %) from extinguishing concentration which available to control of flame. As test result, surface fire and deep seated fire in protected area is obtained $CO_2$ design concentration and maintained design concentration more than 20 minutes as deep-seated fire. Through this study, we introduced direct discharging test method and decision method. And furthermore, especially in the dangerous facilities as a unit of Nation, we suggested necessity about reliability of extinguishing facilities to use direct test method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.377-383
• /
• 2005

Because explosive fluid is used at high temperature or under high pressure in petrochemistry and refined oil equipment, the interest about safety of equipments is intensive. Specially, the safety of high pressure reactor vessel is required among them. The material selected in this study is 2.25Cr-1Mo steel that is widely used for high pressure reactor vessel material of petrochemical plant. Eight kinds of artificially aged specimens were prepared by differing from aging periods under three different temperatures. The material was iso-thermally heat treated at higher temperatures than $391^{\circ}C$ that is the operating temperature of high pressure reactor vessel. Vickers hardness properties and electrical resistivity properties about artificially aged material as well as un-aged material were measured, and master curves were made out from the correlation with larson-Miller parameter. And electrical resistivity properties as well as Victors hardness properties measured at high pressure reactor vessel of the field were compared with master curves made out in a laboratory. Degradation evaluation possibility in the field of high pressure reactor vessel by using electrical resistivity method was examined. Electrical resistivity property measured in the field is similar with that of artificially aged material in similar aging level.