• 자원환경지질
• /
• 제23권3호
• /
• pp.329-342
• /
• 1990

The purpose of this study is to clarify the nature of the differentiation and petrogenesis of igneous rocks in comparison with experimental results based on petrological and geochemical criteria. Study area is composed of the Precambrian granitic gneiss complex, Triassic meladiorite and biotite granodiorite, Jurassic biotite granite, and Cretaceous quartz porphyry. According to the data of EPMA, the clinopyroxene and orthopyroxene of meladiorite come under salite and hypersthene, respectively. Such results suggests that meladiorite is incipient differentiated products of basic magma under slow cooling condition. The petrochemical data of variation diagram of major element oxides vs. silica and of trace element oxide vs. silica, AMF triangle diagram and trace elements suggests that igneous rocks of study area are plutonic rocks belong to calc alkali rock series of the source of comagma intruded-emplaced in the order of meladiorite, biotite granodiorite and biotite granite by fractional crystallization of magma.

• Geomechanics and Engineering
• /
• 제6권5호
• /
• pp.487-502
• /
• 2014

A three dimensional finite element model was used to simulate rapid impact compaction (RIC) in loose granular soils using ABAQUS software for one impact point. The behavior of soil under impact loading was expressed using a cap-plasticity model. Numerical modeling was done for a site in Assalouyeh petrochemical complex in southern Iran to verify the results. In-situ settlements per blow were compared to those in the numerical model. Measurements of improvement by depth were obtained from the in-situ standard penetration, plate loading, and large density tests and were compared with the numerical model results. Contours of the equal relative density clearly showed the efficiency of RIC laterally and at depth. Plastic volumetric strains below the anvil and the effect of RIC set indicated that a set of 10 mm can be considered to be a threshold value for soil improvement using this method. The results showed that RIC strongly improved the soil up to 2 m in depth and commonly influenced the soil up to depths of 4 m.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.525-534
• /
• 2015

A new structural dynamic fuzzy reliability analysis under stochastic loads which are applied several times is proposed in this paper. The fuzzy reliability prediction models based on time responses with and without strength degeneration are established using the stress-strength interference theory. The random loads are applied several times and fuzzy structural strength is analyzed. The efficiency of the proposed method is demonstrated numerically through an example. The results have shown that the proposed method is practicable, feasible and gives a reasonably accurate prediction. The analysis shows that the probabilistic reliability is a special case of fuzzy reliability and fuzzy reliability of structural strength without degeneration is also a special case of fuzzy reliability with structural strength degeneration.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.249-256
• /
• 2017

The history of polyurethane is relatively shorter compared to that of the other polymers, though its importance has grown rapidly. Due to its unique properties, polyurethanes are widely applied in various fields. In particular, the automotive industry is one of the important application fields. To date, polyols and isocyanates used in the polyurethane industry are generally of petrochemical origin. Recently, owing to the oil crisis, legislation, and growing awareness towards environmental preservation, the demand for more sustainable and eco-friendly raw materials has increased. In this paper, the latest research and development trends in polyurethane applications were reviewed, with a focus on the automobile industry in areas such as seat comfort, noise reduction, light weight, biomass-based polyurethane, and recycling.

• 한국환경과학회지
• /
• 제3권4호
• /
• pp.373-380
• /
• 1994

Volatile organic compounds in the ambient air were gathered irregularly by normal temperature concentrating method at Odea-ri and Oceon-ri Ulsan-gun in the neighbourhood of Ulsan Petrochemical Industrial Complex and analyzed with gas chromatograph. Several hydrocarbons in common aklospheric air or emitted fugitively from the chemical plants were identified and quantified by comparison with the retention times of standard compounds. The results from several field surveys in 1992 show that the concentrations of styrene at residential area of Odea-ri and Ocheon-ri were less than 0.4 ppm, but once a while greater within the chemical plants area. When it smelled unpleasantly in these area, the concentration of hydrocarbons were also high. It was concluded that the close and long-term investigation about other odorous components but hydrocarbons will be necessary to ascertain the cause of unpleasant odor of these area.

• 기계저널
• /
• 제34권11호
• /
• pp.859-866
• /
• 1994

석유화학플랜트에서 운용되는 반응로, 저장탱크, 열교환기 등의 압력용기 그리고 배관 등의 시 설물은 장기간 사용함에 따라 고온, 고압, 부식성 분위기, 열응력, 피로 등 여러 가지 요인으로 경년열화되어 노후화 된다. 일반적으로 이들 설비들에서 작용하는 유체나 가스의 누출은 화재나 폭발과 같은 재해 뿐만아니라 주위 환경을 오염시켜 공해를 유발하게 되며, 이들 시설물에 대한 신뢰성 및 안전성 확보는 국가기간 산업에서 매우 중요하며 이와 관련된 장치의 설계, 시공 뿐만 아니라 시험검사 및 평가기술 측면에서도 중요시되고 있다. 플랜트 시설물에 대한 가동중 주기적인 안전진단은 현상의 파악 뿐만 아니라 인명과 재산의 손실을 미연에 예방하고 경제적 이고 효율적인 운영계획 수립에 필수적인 것이다. 이 글에서는 국내 석유화학플랜트의 검사현 황을 알아보고 앞으로 플랜트의 효율적 운영 및 안전 운전을 위한 가동중검사 기술 및 개선대 책에 대하여 기술하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.938-945
• /
• 2004

Intrinsic safety is generally considered the safest method of operating electrical instrumention in potentially explosive atmospheres. The method of intrinsic safety limits the energy passing into the hazardus area. The energy limitation is provided by the use of safety barriers which are mounted in the safe area. Because of the energy limitation, regardless of the fault in the hazardous area, sufficient energy cannot be released to ignite the explosive atmosphere. The following industries are known to have hazardous locations: chemical. munitions, petrochemical, auto(paint spray booths), grain, waste water, printing, distillers, pharmaceutical. breweries, cosmetics, and utilities. In this paper, a isolator type barrier for ship(LNG, LPG, etc,) and test equipment confidence are proposed. The test equipments are designed for mechanical electrical life time test and vibration. All of test results satisfy the goal and the studied barrier shows the improved confidence.

• 자원환경지질
• /
• 제19권2호
• /
• pp.123-131
• /
• 1986

This study is focused on petrochemistry and petrogenesis of alkali granite which exposed at northern area of the Uljin mine in NE Korea. The rock is corresponded to the range of alkali feldspar granite and alkali feldspar quartz syenite on IUGS classification and contains characteristic Fe-rich biotite (annite) and sodic alkali amphibole (arfvedsonite). The alkali granite is the hypersolvus one-feldspar granite which is characterized by the absence of plagiclase except as a component of perthite and its normatve An contents are less than 5wt%. The bulk compositions of the alkali granite show reverse trends compared to Daly's. Tuttle and Bowen (1958) experimentally support that properties of the hypersolvus granite indicate that they have crystallized at high temperatures from a magma.

• 기계저널
• /
• 제34권11호
• /
• pp.867-876
• /
• 1994

석유, 화학 설비를 구성하고 있는 기기의 파손으로 인하여 파생되는 인명, 재산 그리고 환경에 대한 피해가 엄청나다는 것은 산업사회가 고도화 될 수록 그 정도를 더해가고 있다. 최근 우리 나라에서도 석유, 화학 설비의 폭발사고 또는 부실시공에 대한 고발 등의 사회적 문제가 발생 하는 것도 간과할 수 없는 현실이다. 이러한 사례는 우리나라의 관련법규와 사회제도를 반영한 통일된 기술기준의 부재에서 비롯되었다고 필자는 주장하고 싶다. 이와 병행하여 통일된 기술 기준에 입각하여 제반 설비가 건설 및 운전되는지를 관리하고, 감독 및 검사하는 기능과 기법이 정리되어 있지 못한 것도 한 원인으로 들 수 있다. 따라서 석유, 화학설비를 보유하고 있는 관 련기관이 기술기준을 개발하고 그에 준하여 이행 여부를 관리, 감독하는 검사 기능을 강화하여야 보일러 및 압력용기의 폭발사고 및 부실시공을 미연에 방지할 수 있는 근본적인 치유책이 될 수 있을 것이다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1998년도 특별강연 및 추계학술발표 개요집
• /
• pp.11-24
• /
• 1998

The invention of fusion wilding technology has brought on a revolutionary change in manufacturing industry which enables the construction of large scale high temperature plants in chemical, petrochemical and power generation industries. However, among the failure cases of high temperature components, premature failures of weldments have taken a large percentage that indicates the detrimental effect of welding on structural integrity. The accurate prediction of the high temperature behaviour of welded components is thus becoming increasingly important in order to realise an optimised design and maintenance of a plant life. In the present paper, recent research activities on high temperature behaviour of welded structures are briefly summarised. A local deformation measuring technique is proposed to determine the creep properties of weldment constituents. A damage mechanics approach is introduced to study the life reduction and ductility reduction due to the presence of a weld in high temperature structures. Finally, the high temperature creep crack growth in weldments is discussed.