• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.604-609
• /
• 2020

The purpose of this study is to check the priority control status of the current operation process alarm by comparing the priority of the alarm set up in PV high trip point, which is being installed and operated in the domestic petrochemical industry, with the criteria presented in ISA 18.2 International Standard or EEMUA 191 Guidelines. In the event of a process problem, excessively set high alarm is provided to the driver in a short period of time, making it difficult to identify the alarm that needs to be handled first. As a result, it is likely that the operator will not be able to carry out appropriate actions within the specified time frame, and many cases have been reported leading to unexpected process shutdowns or process accidents. Therefore, this study aims to introduce international standards related to alarm management and identify the level of alarm control used at the domestic petrochemical industry site to inform potential risks that may occur in the petrochemical process of the national industrial complex in the future and suggest ways to reduce risk factors. This paper was submitted to Professor Lee Inbeom's retirement anniversary issue.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.278-283
• /
• 2014

Carbon nanotubes (CNTs) are used in various composite materials to enhance electrical, thermal and mechanical properties of composite materials. In this study, we investigate the wear characteristics of polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) blends containing multi-walled carbon nanotubes (MWCNTs). PC/ABS blends are commonly used in many industrial applications such as cellular phones and display cases and MWCNTs have been added to the PC/ABS blends to improve their electromagnetic interference shielding (EMS). We performed wear tests on PC/ABS blends containing MWCNTs under reciprocating linear sliding conditions with chrome steel balls as a counterpart material. The normal loads were 10, 30, 50, 70, 100 N, the sliding speed was 10 mm/s, the stroke length was 15 mm, and the tests lasted 900 s. The MWCNTs included in the PC/ABS blends lower the wear volume and friction coefficient of the composites. We analyzed the wear debris collected from the composites during the tests in terms of the MWCNT concentration using inductively coupled plasma optical emission spectroscopy. The results show that the quantity of MWCNTs in the debris is proportional to the concentration of MWCNTs in the composite, indicating that the exposure of the MWCNTs to environments by wear could be increased with their concentration in the composite.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1085-1093
• /
• 2017

Plasticizers are materials added to give softness and elasticity to plastics having rigid properties to give soft properties as products, and they are mainly added to high molecular materials to give flexibility to improve workability and to improve cold resistance, resistance to volatility and electrical properties. It is used for the purpose. Most plasticizers are inert liquids, similar in function to solvents but with high molecular weight and no volatility. In addition, when dissolved in petrochemical products, only the plasticizer is separated by the matrix effect with other compounds, and qualitative and quantitative analysis. In this study, qualitative and quantitative analysis of DOA and DOP, which are representative components of petrochemical products, were conducted using MD-GC/MS and developed an optimal plasticizer analysis method.

• Journal of Environmental Impact Assessment
• /
• v.31 no.5
• /
• pp.321-333
• /
• 2022

In this study, the concentration and distribution characteristics of BTEX (benzene toluene, ethylbenzene, and xylene) emitted from Daesan Petrochemical Industrial Complex were examined to determine their potential hazards to local residents. Residents living nearby the complex areas may be exposed to the chemicals through various media (air, water, and soil), especially by air. This study evaluated human health risks by inhalation using both deterministic and probabilistic risk assessment approaches. As a result of the deterministic risk assessment, the non-cancer risk was much lower than the regulation limit of hazard index (HI 1.0) for all the points. However, in case of cancer risk evaluation, it was found that the risk of excess cancer for benzene at point A located in the industrial complex was 2.28×10^-6, which slightly exceeded the standard regulatory limit of 1.0×10^-6. In addition, the probabilistic risk assessment revealed that the percentile exceeding the standard of 1.0×10^-6was found to be 45.3%. The sensitivity analysis showed that exposure time (ET) had the greatest impact on the results. Based on the risk assessment study, it implied that ethylbenzene, toluene, and xylene had little adverse effects on potential human exposure, but benzene often exceeded the cancer risk standard (1.0×10^-6). Further studies on extensive VOCs monitoring are needed to evaluate the potential risks of industrial complex areas.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.492-498
• /
• 2022

Process control systems used in most domestic petrochemical corporates today are based on the Windows platforms. As technology leans toward opened environment, the exposure risk of control systems is increasing. However, not many companies are preparing for various cyberattacks due to lack of awareness and misunderstanding of cyber intrusion. This study investigated the extent of how much exposed the petrochemical process control system is to security threats and suggested practical measures to reduce OT cybersecurity vulnerabilities. To identify the cyber threat status of process control systems, vulnerabilities of the Windows platform, a principal cyber threat factor, have been analyzed. For research, three major DCS providers in Korea and the discontinuation of Windows platform of 635 control systems were investigated. It was confirmed that 78% of the survey subjects were still operating in the discontinued windows platforms, and those process control systems were operated in a state vulnerable to cyber intrusions. In order to actively cope with these cyber threats, legal regulations such as designation of critical infrastructure for major petrochemical facilities which is implemented in advanced countries such as the United States are needed. Additionally, it is necessary to take the initiative in eradicating security threats to the process control systems by aggressively introducing security solutions provided from existing DCS suppliers. This paper was submitted to Professor Ko JaeWook's retirement anniversary issue.

• Tribology and Lubricants
• /
• v.1 no.1
• /
• pp.59-68
• /
• 1985

Processes such as vacuum distillation, mixed solvent extraction, neutralization and clay treatment were used to refine an electrical insulating oil, The improved reused oil showed an excellent copper corrosion resistance and gave a better oder than that of oil refined from the conventional acid treatment method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.84-89
• /
• 2003

Fuzzy controller is one of the succeed controller used in the process control in case of model uncertainties. But it my be difficult to fuzzy controller to articulate the accumulated knowledge to encompass all circumstance. Hence, it is essential to provide a tuning capability. There are many parameters in fuzzy controller can be adapted, scale factor tuning of normalized fuzzy controller is one of the adaptation parameter. Two adaptation methods are implemented in this work on an experimental thermal process, which simulate heating process in liquefied petroleum gases (LPG) recovery process in one of petrochemical industries: Gradient decent (GD) adaptation method; supervisory fuzzy controller. A comparison between the two methods is discussed.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.622-624
• /
• 2003

Poly(lactic acid) is a biodegradable themoplastic based on the renewable resources to substitute for petrochemical plastics. Most of PLA is produced by ring opening polymerization from lactide. However, pyrolysis process in the lactide synthesis is expensive, we studied lactide synthetic process for more economical preparation of PLA. In this research was tried to minimize the pyrolysis time, and obtained L-lactide from lactic acid without any catalyst.

• 대한예방의학회:학술대회논문집
• /
• 1999.10a
• /
• pp.287-288
• /
• 1999

• 대한예방의학회:학술대회논문집
• /
• 1999.10a
• /
• pp.53-54
• /
• 1999