• 청정기술
• /
• 제12권4호
• /
• pp.244-249
• /
• 2006

지하수 오염의 주요원인 중 하나인 TCE를 태양광과 $TiO_2$ 광촉매를 사용하여 광분해할 때 주요변수인 오염물의 초기농도, $TiO_2$ 주입량, pH, 산화제로서 persulphate($S_2O{_8}^-$) 및 $H_2O_2$가 광촉매 반응에 미치는 영향을 파악코자 하였다. 분석 결과 $TiO_2$ 주입량, pH 및 산화제를 증가시킬수록 TCE의 분해효율이 향상되었으나, TCE의 초기주입농도를 증가시킨 경우에는 분해효율이 감소되었다. 첨가제의 종류에 따른 영향을 살펴본 결과 $H_2O_2$를 사용한 경우가 persulphate를 사용한 경우보다 더욱 효과적인 것으로 나타났다. 또한 상대독성에 대한 분석결과 $solar/TiO_2/H_2O_2$ 공정이 가장 효과적인 것으로 나타났으며 반응시간 150분에서 $solar/TiO_2/persulphate$ 공정보다 약 15%, $solar/TiO_2$ 공정보다 약 35% 낮게 나타났다.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.577-582
• /
• 2004

The photocatalytic degradation of atrazine and PCP, a endocrine disruptors, has been investigated over $TiO_2$ photocatalysts under ultraviolet (UV) light irradiation. The effect of operational parameters, i.e., pH, light intensity and persulphate concentration on the degradation rate of aqueous solution of atrazine and PCP has been examined. The results presented in this work demonstrate that, as pH and the light intensity increased, the photocatalytic reaction rates were enhanced. Individual use of $TiO_2$-persulphate was far more effective than using only $TiO_2$ in atrazine and PCP removal. Based on the overall experimental results, the photocatalytic oxidation of atrazine and PCP with the coated $TiO_2$ photocatalyst is found to be very effective under the operational conditions delineated in this study.

• 한국세라믹학회지
• /
• 제42권3호
• /
• pp.205-210
• /
• 2005

Tetraethyl Orthosilicate(TEOS)를 $SiO_2$ 전구체 용액으로 사용하여 Polyacrlamide gel 방법으로 나노 실리카 분말을 합성하였다. 이 gel 공정법은 비교적 간단한 중합법이며, 고분자 망상구조가 $SiO_2$의 응집을 억제하므로 비교적 낮은 하소온도에서 나노입자를 합성할수 있었다. $SiO_2$ 분말입자의 크기는 gel 전구체중의 ammonium persulphate와 N,N'-methylene-bis-acryamide(BIS)의 농도에 영향을 받았다. 실리카 입자의 크기는 ammonium persulphate의 농도가 증가할수록 작아졌으며 그 농도가 0.01M일때 가장 작은 10nm크기의 입자를 얻었다. 또한 그 입자의 크기는 BIS의 농도가 증가할수록 작아졌으며 그 높도가 0.05M일때 입자의 크기는 5nm였다.

• 대한화학회지
• /
• 제52권1호
• /
• pp.66-72
• /
• 2008

태양광과 UV-A빛 조건하에 수용액 속에서 디아조염료의 광 촉매분해반응에 대해 조사를 해보았다. 염료의 광 촉매 분해반응에는 염료의 농도, 촉매 량, 그리고 pH와 같은 여러 가지 영향 요소들이 존재한다. 과산화수소, ammonium persulphate와 isopropanol 등의 첨가는 분해비율에 대해 큰 영향을 미친다. Langmuir-Hinshelwood model에 근거한 광 분해반응의 동역학적분석은 광분해반응은 대략적으로 pseudo first order kinetics을 따름을 알 수 있다. 광분해산물로 이산화탄소, 질산염, sulphate 이온 등이 증명되었다. 광 촉매, ZnO는 태양광 하에서보다 UV-A빛 하에서 더욱 효율적임을 발견하였다.

• 대한화학회지
• /
• 제15권5호
• /
• pp.223-228
• /
• 1971

In the electrolytic preparation of persulphate from sulphate solution, the current efficiency decrease with temperature increase at the platinum anode. But in case of electrodeposited lead peroxide anode, the current efficiency increase with temperature of the solution. The reason seems to be that the ozone formation is faster in platinum anode than in lead peroxide as temperature increase.

• Carbon letters
• /
• 제25권
• /
• pp.33-42
• /
• 2018

Activated carbon (AC) was modified by ammonium persulphate or nitric acid, respectively. AC and the modified materials were used as catalyst supports. The oxygen groups were introduced in the supports during the modifications. All the supports were characterized by $N_2$-physisorption, Raman, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis. Methanol synthesis catalysts were prepared through wet impregnation of copper nitrate and zinc nitrate on the supports followed by thermal decomposition. These catalysts were measured by the means of $N_2$-physisorption, X-ray diffraction, XPS, temperature programmed reduction and TEM tests. The catalytic performances of the prepared catalysts were compared with a commercial catalyst (CZA) in this work. The results showed that the methanol production rate of AC-CZ ($23mmol-CH_3OH/(g-Cu{\cdot}h)$) was higher, on Cu loading basis, than that of CZA ($9mmol-CH_3OH/(g-Cu{\cdot}h)$). We also found that the modification methods produced strong metal-support interactions leading to poor catalytic performance. AC without any modification can prompt the catalytic performance of the resulted catalyst.

• Advances in materials Research
• /
• 제3권4호
• /
• pp.183-197
• /
• 2014

Copolymers of gelatin and poly (vinyl alcohol), (PVA) grafted by acrylic acid (AAc) with excellent water absorption and retention abilities under neutral conditions were successfully synthesized using $^{60}Co$ gamma radiations in presence of ammonium persulphate (APS), as water soluble initiator and sodium bicarbonate ($NaHCO_3$) as foaming agent. The optimum synthesis conditions pertaining to maximum swelling percentage were evaluated as a function of gelatin/PVA ratio, amount of water, concentration of APS, $NaHCO_3$, monomer concentration and total irradiation dose. Maximum percent swelling (1694.59%) of the copolymer, gelatin-co-PVA, was obtained at optimum $[APS]=2.92{\times}10^{-1}mol/L$, $[NaHCO_3]=7.94{\times}10^{-2}mol/L$ and 1.5 mL of water at total dose of 31.104 kGy while in case of grafted copolymer, (gelatin-co-PVA)-g-poly(AAc), maximum percent swelling (560.86%) was obtained using $8.014{\times}10^{-1}mol/L$ of AAc in 9 mL water with 31.104 kGy preirradiation dose. The pristine and grafted copolymers were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning electron Microscopy (SEM), Thermal gravimetric analysis (TGA) and X-Ray Diffraction (XRD) methods. The copolymers loaded with an antiseptic, Povidone, were used as wound dressing materials for wounded gastrocnemius muscle of mice and the results exhibit that (gelatin-co-PVA)-g-poly (AAc) copolymer is a potent wound dressing material as compared to the copolymer.