• 한국컴퓨터정보학회논문지
• /
• 제17권5호
• /
• pp.71-80
• /
• 2012

본 논문에서는 개인 영역의 저속 데이터 전송률을 요구하는 응용을 운용하기 위한 미래병사체계의 시스템 모델을 제안한다. 저속 데이터 전송률을 요구하는 응용들은 기존의 무선 센서 네트워크기술을 참조할 수 있지만, 상이한 데이터 전송률을 지원하기에 적합하지 않다. 이러한 기존 시스템의 문제점들을 해결하가 위하여 미래병사체계에 적합한 CSMA/CA 알고리즘을 제안하였다. 제안한 알고리즘은 데이터 전송률에 기반을 두어 CSMA/CA 알고리즘의 파라미터를 가변하도록 설계되었다. 제안한 시스템 모델 및 알고리즘은 Castalia를 이용하여 시뮬레이션 하였으며, 시뮬레이션 결과 제안한 시스템 모델이 기존 방식과 비교하여 데이터 처리량이 개선되고, 충돌 확률이 감소함을 확인할 수 있었다.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.494-500
• /
• 2008

This paper presents the analyzed result of the series arc fault current by using the discrete wavelet transform. The series arcing is caused by a loose connection in series with the load circuit. The series arc current is limited to a moderate value by the resistance of the device connected to the circuit, such as an appliance or a lighting system. The amount of energy in the sparks from the series arcing is less than in the case of parallel arcing but only a few amps are enough to be a fire hazard. Therefore, it is hard to detect the distinctive difference between a normal current and a intermittent arc current. This paper, presents the variation of the ratio of peak values and RMS values of the series arc fault current, and proposes the novel series arc fault detecting method by using the discrete wavelet transform. Loads such as a CFL lamp, a vacuum cleaner, a personal computer, and a television, which has the very similar normal current with the arc current, were selected to confirm the novel method.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.121-127
• /
• 2004

Electric ballast is widely used to turn on the fluorescent. Electric ballast measure occurrence of harmonic through the actual measurement and it is simulated by modeling equivalent circuit for harmonic analysis. The purpose of this paper is to give an equivalent circuit modeling methodology for the harmonic currents generated by single-phase personal computer loads to evaluate a commercially available series resonant filter for the harmonic currents compensation based on the IEC std 61000-3-2 and IEEE 519 standards for limiting harmonic distortion.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권2호
• /
• pp.95-99
• /
• 2006

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and to inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens, LED illumination systems, and a frame grabber inside the PC. This system loads up to six feeders at a time and inspects them automatically and sequentially. The inspection software was implemented using Visual C++ on Windows with easily usable GUI. Using this system, we can automatically measure and inspect the quality of ail feeders in production process by analyzing the measurement results statistically.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.712-720
• /
• 1988

본 연구에서는 프레스에 의한 축대칭 냉간단조품의 자동공정설계 및 금형설계 를 위한 대화식 프로그램인 "COLD-FORMING"과 "DESIGN-DIE"의 개발에 대하여 설명한다. 프로그램의 능력은 "COLD-FORMING"에서는 (1) 중실부품의 냉간단조에 있어서 작업 순 서의 해석과 각 단계에 포함된 개별작업의 인식 (2)중간 예비성형단계의 형상 및 치수 결정 (3) 각각의 성형단계에서의 성형하중계산 (4) 작업지시서를 위한 그래픽 출력 등 이며, "DESIGN-DIE"에서는 앞의 공정설계에서 구해진 결과를 이용하여 (1) 성형에 필 요한 다이세ㅌ의 형상, 재질 및 최적 치수를 결정 (2) 다이세ㅌ의 그래픽 출력 등을 할 수 있다. 및 최적 치수를 결정 (2) 다이세ㅌ의 그래픽 출력 등을 할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제8권7호
• /
• pp.573-577
• /
• 2002

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens, LED illumination systems, and a frame grabber inside the PC. This system loads up to six feeders at a time and inspects them automatically and sequentially. The inspection software was implemented using Visual C++on Windows NT with easily usable GUI. Using this system, we can automatically measure and inspect the quality of all feeders in production process by analyzing the measurement results statistically.

• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.103-111
• /
• 2003

교육용 건물에는 개인용 컴퓨터와 같은 비선형 부하가 증가하여, 중성선에는 많은 고조파 전류가 흐른다. 3상 4선식 배전 계통을 채용하는 중성선에 과다한 고조파 전류가 흐르면 중성선 도체 과열과 보호 시스템의 오동작등 많은 고조파 장해를 일으킨다. 본 논문에서는 현장에서 실측한 고조파 전류와 전압으로 고조파 해석용 3상 등가회로를 구성하였다. 실측한 값과 MATLAB으로 시뮬레이션한 값을 수치와 그래프로 비교 검토 하였다. 또한 중성선 고조파 전류 저감 대책으로 동조 수동 필터를 사례연구 시스템에 적용하여 고조파 저감 효과도 알아 보았다.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.29-38
• /
• 2003

This paper deals with an automated computer-aided process planning and die design system with which designer can determine operation sequences even after only a little experience in process planning and die design of multi former-bolt products by multi-stage former working. The approach is based on knowledge-based rules, and a process knowledge base consisting of design rules is built. Knowledge fur the system is formulated from plasticity theories, empirical results and the empirical knowledge of field experts. Programs for the system have been written in AutoLISP for AutoCAD with a personal computer. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system is composed of four main modules. The process planning and die design module considers several factors, such as the complexities of preform geometry, punch and die profiles, specifications of available multi former, and the availability of standard parts. It can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution and the level of the required forming loads by controlling the forming ratios. The system uses 2D geometry recognition and is integrated with the technology of process planning, die design, and CAE analysis. The standardization of die parts for multi former-bolt products requiring a cold forging process is described. The system developed makes it possible to design and manufacture multi former-bolt products more efficiently.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.211-217
• /
• 2010

다양한 분야에 활용이 가능한 나노소자의 개발과 나노소자의 수명 및 신뢰성을 결정하기 위해서 나노구조체의 역학물성 측정은 중요하다. 본 연구에서는 다중벽탄소나노튜브(MWCNT)와 산화아연나노막대(ZnO nanorod)의 인장시험을 전자주사현미경(SEM) 내부에서 수행하였다. 챔버내부에 구축된 나노조작기 앞에 힘센서가 장착되었고, 나노조작기는 조이스틱과 컴퓨터로 제어 가능하도록 설계되었다. 반으로 자른 투과전자현미경(TEM)그리드 위에 분산된 나노구조체는 전자주사를 통하여 힘센서와 고정된 후 인장시험이 수행되었다. 인장시험 후 TEM과 SEM을 통하여 파단면을 측정하였고 MWCNT와 ZnO nanorod의 탄성계수는 0.98TPa, 55.85GPa로 각각 측정되었다.