• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.256-269
• /
• 1991

컴퓨터 통합 생산(Computer Integrated Manufacturing, CIM) 기술은 재래적 개념으로 생산의 3대 요소인 토지(Land), 노동(Labor), 자본(Capital)이외에 정보(Information)의 요소를 추가로 활용하여 설계, 가공과 조립, 검사, 저장 및 운반, 그리고 생산 관리간의 정보교환을 통합적으로 제어, 응용함으로써 전 생산 공정의 컴퓨터를 통한 자동화를 구현한 이래 총체적 최적 생산을 추구하는 생산 형태로 서 종래의 개념으로서는 양립된 생산성(Productivity)과 유연성(Flexibility)을 동시에 얻고자 하는 첨단 생산 기술이다. 본 연구에서는 나름대로의 전략을 수립 하여 어느정도 보편화 되어있는 기기들의 공정 제어(Process Control)및 통신에 관해 연구하고 이를 구현하는 소프트웨어를 제작하고 실험을 거쳐 검증하려 한다. 초기 단계에서는 퍼스널 컴퓨터 (Personal Computer, PC)상에서 프로그램의 실험을 하고 이를 바탕으로 다중작업 오퍼레이팅 시스템(Multi-Task Operating System)으로 의 전이를 꾀할 것이다.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.593-618
• /
• 2011

Development of the economy and the growing income of people interested in the leisure and health has been focused. Past the town common wells and groundwater around the water, but health is a priority these days to solve the drinking water directly from tap water, but most people work from home, through the water purifier has been resolved. Depending on seasonal changes and personal taste of coffee, if you can enjoy a snack and water purifier is a restaurant, lounge, public areas and focusing on the rapid spread of the fire, water purifier as compared to the total number of fires increased by 0.03% per year trend on, but the washrooms fire and fire-related research data and case studies with analysis of the exact cause lack of proper preventive measures are insufficient reality. In this study, focusing on electrical energy using a water cooler to understand the structure and principles of fire, the fire revealed the mechanism is vulnerable to the consideration of factors, the exact cause of the fire investigation and the Assistant, manufacturing defects, and to contribute to fire prevention review should.

• IE interfaces
• /
• v.25 no.2
• /
• pp.178-186
• /
• 2012

The DRAM module is an important part of servers, workstations and personal computer. Its malfunction causes a lot of damage on customer system. Therefore, customers demand the highest quality products. The company applies DRAM module Outgoing Quality Assurance Inspection(OQA) to secures the highest quality. It is the key process to decides shipment of products through sample inspection method with customer oriented tests. High fraction of defectives entering to OQA causes inevitable high quality cost. This article proposes the application of ensemble learning to classify the lot status to minimize the ratio of wrong decision in OQA, observing a potential in reducing the wrong decision.

• Journal of Families and Better Life
• /
• v.16 no.1
• /
• pp.125-139
• /
• 1998

This study investigates work loads and coping strategies of the married female production workers(MFPW). The data of 370 MFPW in manufacturing sector in Taegu are collected by using a questionare in August 1995 The findings of this study are as follow: 1) The results of objective work loads assessed time dairy show that the average working hours is 14.25 hours during weekdays. The respondents spend 11.5 hours and 2.75 hours on doing paid and household work respectively,. The shortage of phisiological and leisure time due to spending excessively long time on work. 2) MFPW perceive the severe subjective work loads in the areas of personal family and social life. The perceived burden from paid work itself is relatively low due to the nature of their job. 3) The coping strategies MFPW actually adopted are limited mostly to those from an individual domain such as shortening the time for sleep leisure or household labor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.347-350
• /
• 2016

Analysis of vulnerability of the software for risk. The weakness of the software material, the importance of strengthening security in accordance with financial damage occurred is emerging. There is a potential risk factor not only from the case, the manufacturing to use the software company that appropriate to use a software business and personal risk of loss to size.In this paper due to diagnose and vulnerabilities in software, diagnosis, the curriculum and to cultivate a diagnostic guide, and security vulnerabilities in software.Proposal system for increased.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.99-120
• /
• 1998

The purpose of this study is to clarify the industrialization process, and locational factors and linkages of manufacturing in Jangyu-Myun, a suburb of Metropolitan Pusan, toward which heavy decentralization of manufacturing from Pusan has been done. Hard data and soft data were used as the basic data. Hard data used for this study were both the statistical data which consists of the number of establishments and employee classified by product type, firm size, organizational type and unit area(dong) which were listed in statistics yearbooks, and the list of the owner's names, addresses, employee number, products and headquarters of firms which were listed in firm directories. Soft data were the results of the interviews with the 53 owners of firms surveyed among the firms selected by Proportional Stratified Sampling Method. The major findings were as follows: (1) Manufacturing location in Jangyu-Myun was regularized in 1980's in which decentralization of manufacturing was activiated. Though the industrialization of study area resulted from the birth, relocation and establishment of branches of the firms originated from the other regions, the relocation of small outer-oriented firms from the central city was the most important factor among them. (2) The main locational factors which induced the decentralizing manufacturing from the central city into Jangyu-Myun are closely related to land, transportation, personal factor, raw material suppliers and market. (3) The differences of important locational factors by the size and organizational type of firms are relevant to the characteristics of manufacturing location. (4) The changes of linkages attendant upon locational changes of firms were not so great and were localized in labor supply and marketing. (5) The strength of linkages is strong in the procurement of materials, in the subcontraction and in the marketing, but not in the ordering. (6) The main factors influencing on the formation of linkages are different by the types of linkages: monopolistic and oligopolistic supply are important in procurement linkages; characteristics of products and production capacity in the subcontraction and ordering; characteristics of products and the subsequent difficulties, in the marketing. (7) With the exception of procurement linkages, the strength of linkages with the outside of the study area are stronger than the linkages with the inside. The strength of linkages with the outside has distance-decay-function and strong linkages with the central city. (8) These spatial characteristics of linkages are different by products type, firm size and organizational type of firms: the spatial ranges of linkages are wider in the multi-location firms than in the single-location firms; the larger the firm size, the wider the spatial range of linkages: there is no consistent trend by products type. In conclusion, some facts described above were proved to be consistent with the results of proceeding studies in the other areas: influence of central city manufacturing relocation on industrialization in the suburb: different decentralization by products type, firm size and organizational types of firms: different locational factors by products type, firm size and organizational types of firms; linkage changes attendant upon locational changes of firms; spatial differences of linkages by products type, firm size and organizational type of firms. Some other factors were proved to be partly consistent: locational factors and spatial characteristics of linkages. Accordingly I think that the results of previous studies on the other areas can be applicable to the explanation of the location and linkage of manufacturing in Jangyu-Myun. For the better explanation on the characteristics of manufacturing decentralization from the central city, more empirical case studies on the location and linkage of manufacturing in the suburb areas are necessary.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2178-2187
• /
• 2015

Bluetooth Low Energy (Bluetooth LE) is a representative break-through communication technology for wireless personal area networks on nowaday. In this environment, most of significant performance should be aiming to energy efficiency due to the policy for manufacturing light-weighted communication devices derived from requirement of world IoT market, and many researches have been developed to satisfy this requirement. While Bluetooth LE has been leading the low power communication technology required from the current market by employing duty cycle and frequency hopping approaches, it couldn't address the problem of reliability on broadcast transmissions. The main goal of this paper is aiming to addressing this problem by suggesting a new method. Furthermore analytic evaluations would also be proceeded to find objective results in the view point of broadcast transmission efficiency from Master device.

• Industry Promotion Research
• /
• v.1 no.2
• /
• pp.27-32
• /
• 2016

This study analyzed the effect of small maufacturing businesses' company culture on organizational performance. The study results showed that personal culture(one's organizational commitment) positively affected job satisfaction and improving creativity. Organizational culture(harmony of organization) and environmental culture(importance of environmental factors) didn't significantly affected organizational perfirmance. Also, organizational commitment was varied by employee's position, harmony of organization was varied by age, education and continuous service year, job satisfaction and creativity was varied by education. This study provided implications for analyzing the importance of personal organizational environmental factors and dicovering individual diffrences of the employees.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.537-542
• /
• 2020

Background: Personal protective equipment (PPE) has been designed in such a way to reduce accident rates. Unfortunately, existing PPE is rather ineffective as it is not able to provide warning signals when hazard is around. The integration of intelligent systems is envisaged to increase the efficiency of existing PPE. Methods: This project designed a safety vest incorporated with metal detectors which can provide immediate warning to the field workers when there is metal hazard around. This product has greater freedom of design via smart manufacturing as it involves the assembly of few commercially available parts into a single entity. Briefly, the metal detector is a do it yourself (DIY) kit, and the safety vest is purchasable from any local market. The DIY kit was connected to a copper coil and being sewed into the safety vest. Results: The metal detector induces beeping sound when there is metal hazard around. A total of 121 engineering students were introduced to the prototype before being requested to answer a survey associated with the design. Respondents have rated >3.00/5.00 for the design simplicity, ease of usage, and light weight. Meanwhile, respondents suggested that the design should be further improved by increasing the metal detection range. Conclusion: It is envisaged that the introduction of this smart safety vest will allow the workers to carry out their duties securely by reducing the accident rates. Particularly, such design is expected to reduce workplace accident especially during night time at construction sites where the visibility is low.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.235-240
• /
• 2001

This study was performed to compare the lead levels of 20 quality control standard samples(KOSHA:18-2000) and 72 field samples in lead-acid battery manufacturing plant between ICP and portable-XRF methods. 1. While the proficiencies of 20 quality control standard samples by ICP were 100%, those of analytic result values by XRF were 75%. 2. The correlation coefficient(r) between the reference values for quality control (REF) and the analytic result values by ICP (ICP) was 1.0(p<0.05), and simple linear regression equation and the coefficient(R2) were REF = -0.0009 + 1.016 ICP and 0.9997, respectively. 3. The correlation coefficient(r) between the analytic result values of quality control standard samples by ICP (ICP) and by XRF (XRF) was 0.975(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -0.0003 + 1.002 XRF and 0.950, respectively. 4. The correlation coefficient(r) between the analytic result values for lead samples of a lead-acid battery manufacturing plant by ICP (ICP) and by XRF (XRF) was 0.993(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -2.058 + 0.996 XRF and 0.987, respectively. 5. While the frequency distributions of XRF /ICP(Ratio) for each ICP concentration levels in a lead-acid battery manufacturing plant revealed high proportion in ratio range of 0.876-1.125 than in ration range of 1.126-1.375. Also, ICP concentration level in ration range of 0.786-1.125 was increased with increase of frequency distribution of XRF/ICP. 6. The limit of detection of XRF on lead was determined to be $6.11{\mu}g$/filter The data presented in this study indicated that relationship for lead level of quality control samples and field samples in a lead -acid battery manufacturing plant by ICP and portable-XRF methods was proved. The practicing industrial hygienist can use portable-XRF to produce a rapid on-site determination of lead exposure that can immediately becommunicated to workers and help identify appropriate levels of personal protection.