International conference on construction engineering and project management
/
2009.05a
/
pp.593-600
/
2009
In Korea, the government has developed SEUMTER, an administration system for building related public service, to facilitate and promote the electronic submission and permission activities. SEUMTER is progressing legality system based on 2D drawing for building administration permission service. However, there are a lot of problems related to legality system owing to complexity of Korea regulation relation and structure, inefficiency of legality system based on 2D drawing, duplication examination of document (soliciting forms for civil affairs) and drawing. Therefore, the purpose of this study is to develop legality system for building administration permission service based on BIM in Korea. To achieve this purpose, the authors have investigated permission procedure and regulation structure that is used in current building administration permission and suggested permission procedure and regulation structure for legality system based on BIM. In addition, the authors have investigated element technologies (for examples, method of structured regulation, BIM model checker, Viewer, etc) for legality system based on BIM. Finally, the authors have suggested strategy and hereafter direction for application of legality system based on BIM.
Of the countries where Korea has advanced for overseas afforestation investments, Indonesia might be the most important country. As the end of 2010, nine Korean companies have been implementing afforestation projects in Indonesia, covering a total area of one hundred and fifty thousand hectares roughly. Following the Memorandum Of Understanding (MOU) on afforestation investment covering five hundred thousand hectares (A/R CDM / industrial afforestation) signed between Korea and Indonesia, the two countries concluded in 2009 an additional MOU covering two hundred thousand hectares for biomass afforestation, thus securing a total afforestation area of seven hundred thousand hectares. Further it was guaranteed that afforestation license would have validity for maximum 95 years, which laid the foundation for long-term stable investments for afforestation projects. Forest law of Indonesia consists of Presidential decree and Governmental decree as superior regulations and Minister's decree as subordinate regulations, being made up of total 17 chapters. Forestry Minister's decree was amended at end of last year, as regards license for exploitation of timber and forestry products in afforestation area. In the past, such license to develop and use timber and forestry products had been granted under Forestry Minister's decree No. P 11 / Menhut-II / 2008. After the amendment in 2010, however, the ground was shifted to Forestry Minister's decree No. P 50 / Menhut-II / 2010, trimming the procedure to obtain afforestation license into a little simplified one.
It is estimated that the loss of Korean agricultural and fishery products during the storage period is usually more than 20%, and it is difficult to increase agricultural products by a 10% annual rate directly. Therefore, development of food preservation techniques has now become a most important atternative for the indirect increase of such products and for its senitary distribution. Changes eating habits and improved living conditions have accelerated the demand for convenience food production and for this reason it is essential that raw materials at stable, resonable prices and hygienic quality be available the year round. At the end of 1980, the Korean government conceded th economical feasibility of the storage of foods by irradiation and a procedure for preserving food by irradiation on a batch scale was successfully developed by KAERI in 1982. Based on the research results accomplished by the KAERI and on the recommendation on wholesomeness of irradiated food by Joint Committee of FAO/IAEA/WHO in 1980, the approval of wholesomeness of irradiated food was declared by presidential decree in June 1985 and the procedure of permission for individual items is in progress. Korean private firms (Ryung Young Co.) which was technically assisted by KAERI for five years have taken mush interest in the establishment of such facilities in Korea, therefore Ryung Young Co. had proposed for the construction of 500 Kci Co-60 irradiator to the Ministry of Science and Technology in July 1984. The permission of construction has approved by government in May 1985. The commercial irradiator will be constructed as one of the most modernized facilities until May 1987 and that facilities will contribute the propagation of commercial storage of foods and its hygienic quality.
Journal of the Korean Society for Precision Engineering
/
v.20
no.1
/
pp.118-125
/
2003
As consumer's desire becomes various, agility of mold manufacturing is the most important factor for competitive mold manufacturer. Decision making process is required to produce optimal result of CAM systems in using commercial CAM system to generate tool path. The paper proposes a methodology fur computer-assisted tool selection procedures for various cutting type of rough, semi-rough and finish cuts. The procedure provides assistance for machining tool selection by analyzing sliced CAD model section of die cavity and core. Information about machining time for the generated NC-code is used to aid the tool selection. The module is developed with commercial CAM API. This module will be used fur the optimization of tool selection and planning process.
The reliability assurance with respect to the test procedure and results of the out-pile mechanical performance test for the nuclear fuel assembly is an essential task to assure the test quality and to get a permission for fuel loading into the commercial reactor core. For the case of vibration test, which is carried out to obtain basic dynamic characteristics of the fuel assembly, proper management and appropriate calibration of instruments and devices used in the test, various efforts to minimize the possible error during the test and signal acquisition process are needed. Additionally, the deep understanding both of the theoretical assumption and simplification cation for the signal processing/modal analysis and of the functions of the devices used in the test were highly required. Finally, to verify the test result to represent the accurate natural characteristics of the structure, the proper correlation analysis between the theoretical and experimental method has to be carried out. In this study, the overall procedure and result of lateral vibration test for the fuel assembly's mechanical characterization were briefly introduced. A series of measures to assure and improve the reliability of the vibration test were discussed.
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.27
no.1
/
pp.80-83
/
2016
In this paper, a simplified uplink transmission procedure is proposed for reducing energy consumption and improving lifetime of CIoT devices. In the proposed procedure, the CIoT devices register information on their service and traffic to the networks, and the networks statically allocate pre-defined amounts of radio resources when the CIoT devices have requested permission for their uplink transmissions. This paper provides details of the proposed procedure comparing with those of the current GSM procedure, and defines detailed operations of the devices and the networks for the proposed one. This shows that the proposed scheme can effectively support CIoT services on GSM networks.
Cardiac cathererization has become a routine diagnostic procedure indicated for evaluation of a wide varity of cardiac conditions. Patients are admitted to the coronary care unit after cardiac catheterization. These conscious patients report feeling uncomfortable in the CCU, but no studies have been done on the effects of bed rest, sand bags on the femoral puncture site and restricted mobility for 4 to 12 hours or longer postprocedure. The main objective of this thesis is to provide basic data to nursing on interventions which de-crease the uncomfortableness experienced by patients in the CCU following cardiac catheterization. In this phenomenological study, the various discomforts felt by the patients were collected and classified. The study subjects were a convenience sample of 29 patients who were admitted to the CCU of a general hospital in Inchon following cardiac catheterization. They were conscious, so they were able to communicate without difficulty. The data were collected over an U days period from July 21, to October 14, 1994. The subjects were interviewed using unstructured open questions and the interviews were tape recorded with the patient's permission The data were analyzed using the Van Kaams phenomenological method. Reliability and validity were exammed by two professor of nursing science, one head nurse, one staff nurse and one cardiologist. The results of the study are summarized as follows ; 1. The 129 descriptive statements by the postcardiac catheterization patients of discomfort were organized into 19 themes. 2. The 19 themes were divided into 3 categories ; physical, psychological, and environmental aspects. 3. The problems concerning the physical aspect were the discomfort of restriction of movement, dysuria, medical devices, pain in the puncture site, symptom is related to the procedure of cardiac catheterization, headache and dizziness, leg painand tingling sensation, and chest pain. The problems concerning the psychological aspect were regret resulting from dependency, economic burden, dissatisfaction with medical personnel, dissatisfaction with medical service system, anxiety about the result of the procedure, concern about the prognosis, loneliness, and concern over treatment procedure. The problems concerning the environmental aspect were influence from neighboring patients, noise, and maladaptation to environmental change. The necessity for holistic care which satisfies physical, psychological, and environmental need must be emphasized in order to solve these discomforts.
Mediation is type of intervention in which the disputing parties accept the offer of the judge or a third party to recommend a solution for their controversy. Mediation differs from arbitration in being a voluntary resolution rather than a judicial procedure. Thus, the parties to the dispute are not bound to accept the mediator's recommendation. Resort to mediation has become increasingly frequent for civil disputes. Mediation has been successful in many cases of civil conflict. Mediation has become increasingly important for monetary disputes as well, particularly in damage cases. While most people consider mediation a far superior experience to court, everything I tell you a mediator should not do is something that at least one mediator I have dealt with has done to a client. In theory, a mediator should never share anything you tell him or her without your permission. In theory a mediator should not "spring" evaluations on anyone in a mediation without your permission (e.g. a mediator should never say "your case is worth \OOOO and I just told the other side that). In theory a mediator should not browbeat or threaten you. At the end, usually about 55% of the time with a good mediator in Kwangju Appellate Court in 2003, the parties reach an agreement that is in their best interests. If they decide to sign off on a signed agreement, the signed agreement is binding. I obviously feel mediation is a very good thing and the numbers and surveys bear me out. This article is written about how mediation is proceeded, what is the realities, what is the problem and what is the activating way. For this study, I research with legal sociological approach using Korean Judicial Year Boot judicial document and my experience as meditator in Kwangju District Court.
International trade conflict has been increased since WTO has appeared. Like this, the cause that the number of international trade conflict has been increased is by means of enlargement of agreements range. But some new facts have been added. They are Anti-dumping, subsidy, Countervailing duty, Safeguard, the norm of intellectual property right, the procedure of permitting importing products, Technical Barriers, agricultural products, and the area of textile. Since Japanese government has decided to give lavor import quarters to China without permission of Korea, Korean government formally presented the system of lavor import quarter to WTO DSB due to WTO agreement disobedience of Japan. Accordingly, this paper has the following purpose; to analyze situation on fiber dispute of Japan. Some methods about trade barrier against Japan need to be solved from another viewpoint owing to lavor IQ dispute.
The Transactions of The Korean Institute of Electrical Engineers
/
v.60
no.11
/
pp.2017-2020
/
2011
Flicker, which is also known as voltage fluctuation, is an electromagnetic phenomenon generated by large scale nonlinear loads, such as arc furnaces and welding machines. Since a severe and continuous flicker can cause to some damages to electrically sensitive loads as well as human's visual irritations, it needs to be appropriately managed by being accurately measured, quantified and assessed. In Korea, an equivalent 10-Hz flicker index, shortly ${\Delta}V10$, is used to determine the permission limit of flicker. This paper presents an efficient calculation of the flicker index by using a half-cycle sliding window and a recursive method, showing a concrete calculating procedure of ${\Delta}V10$ from the viewpoint of signal processing.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.