• 로봇학회논문지
• /
• 제6권1호
• /
• pp.18-26
• /
• 2011

This paper presents a method, Exposure Controlled Temporal Filtering (ECF), applied to visual motion tracking, that can cancel the temporal aliasing of periodic vibrations of cameras and fluctuations in illumination through the control of exposure time. We first present a theoretical analysis of the exposure induced image time integration process and how it samples sensor impingent light that is periodically fluctuating. Based on this analysis we develop a simple method to cancel high frequency vibrations that are temporally aliased onto sampled image sequences and thus to subsequent motion tracking measurements. Simulations and experiments using the 'Center of Gravity' and Normalized Cross-Correlation motion tracking methods were performed on a microscopic motion tracking system to validate the analytical predictions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1268-1271
• /
• 2002

The major threat of geometric manipulations is that they change the positions of watermarks, therefore the detection process fails to extract watermark properly. Since they cause the same effects on the host image as watermarks simultaneously, evaluating the distorted host image can be helpful to measure the nature of distortions. In this paper, we propose a geometrical distortion-resilient watermarking algorithm based on this property. Firstly we evaluate the orientation of a host image by filtering it with directional Gabor kernels, then we insert embedding pattern aligned to the estimated orientation. In its detection step, we evaluate the orientation again by Gabor filtering, then simply project and average the projected value to obtain a 1-D projection average pattern. Finally, auto-correlation function of the 1-D projection average pattern identifies periodic peaks. Analysed are experimental results against geometrical attacks including aspect ratio changes.

• Bulletin of the Korean Chemical Society
• /
• 제24권2호
• /
• pp.178-182
• /
• 2003

The stress and the heat-flux auto-correlation functions in the Green-Kubo formulas for shear viscosity and thermal conductivity have non-decaying long-time tails. This problem can be overcome by improving the statistical accuracy by N (number of particles) times, considering the stress and the heat-flux of the system as properties of each particle. The mean square stress and the heat-flux displacements in the Einstein formulas for shear viscosity and thermal conductivity are non linear functions of time since the quantities in the mean square stress and the heat-flux displacements are not continuous under periodic boundary conditions. An alternative to these quantities is to integrate the stress and the heat-flux with respect to time, but the resulting mean square stress and heat-flux displacements are still not linear versus time. This problem can be also overcome by improving the statistical accuracy. The results for transport coefficients of liquid argon obtained are discussed.

• 한국가구학회지
• /
• 제24권4호
• /
• pp.318-328
• /
• 2013

This study aimed to examine the theoretical consideration and concept of hybrid that could be applicable to wood product design, to analyze design trend according to the morphological transformation by means of combination of hybrid material and function, to understand the correlation between type of wood product and materials and to apply it to the domestic and overseas hybrid concept of wood product design study. A study of assembling output by empirical experiment to embed natural resources into acrylic resin in order to develop wood products was carried out. And an wood product was suggested that satisfied lighting and hanger function through a new wood product design development combined with hanger function and lighting function. Through such process, a new design paradigm was suggested to cope with the periodic trend and to induce mass production of designed product. Thus, this study set a new guideline for activating wood product design and attempted to meet the social demand of encouraging new value creation.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.337-340
• /
• 2001

We show that the microstrip ring with a narrow gap exhibits a photonic band gap (PBG) that is generally believed to be created by a periodic array. The discontinuity of impedance at the narrow gap induces the multiple reflections with fixed phase correlation necessary to make the PBG. We have also discussed the tuning of the PBG frequency by applying an external voltage on a varactor mounted on the gap and the applications of this PBG ring as a tunable bandstop filter and a microwave switch.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.608-609
• /
• 2011

In this study, we tried to validate FLUENT solver model and domain setting for the problem of convective heat transfer in multiple tube bank under transitional zone. We have paid special attention to verify proper boundary conditions and the grid convergence. Through validation work, it is found that unsteady solution method with two-dimensional simulation domain can produce reasonable accurate results compared with existing experimental data. Simulation results with steady solution generates relatively large error. We found that both steady and unsteady method for three-dimensional domain shows acceptable accuracy. Further parametric study for deriving correlation from transverse and longitudinal pitch is currently underway.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.197-198
• /
• 1998

We tested the capability of Pointwise Correlation Dimension(PD2), Approximate Entropy (ApEn) and LZ complexity, as alternative measures of a biological signal. For this purpose, we analyzed standard data and a healthy child's 24-hour heart rate variability. Our conclusion is as follows. First, PD2, ApEn and LZ complexity can be used for discerning chaotic attractor, white noise, and periodic signal. Second, these measures show different characteristics on day and night. Third, these measures can be used for detecting time-varying characteristics of biological signals.

• 소음진동
• /
• 제7권5호
• /
• pp.819-826
• /
• 1997

The finite element analyses of a composite hingeless rotor blade in forward flight have been performed to investigate the influence of blade design parameters on the blade stability. The blade structure is represented by a single cell composite box-beam and its nonclassical effects such as transverse shear and torsion-related warping are considered. The nonlinear periodic differential equations of motion are obtained by moderate deflection beam theory and finite element method based on Hamilton principle. Aerodynamic forces are calculated using the quasi-steady strip theiry with compressibility and reverse flow effects. The coupling effects between the rotor blade and the fuselage are included in a free flight propulsive trim analysis. Damping values are calculated by using the Floquet transition matrix theory from the linearized equations perturbed at equilibrium position of the blade. The aeroelastic results were compared with an alternative analytic approch, and they showed good correlation with each other. Some parametric investigations for the helicopter design variables, such as pretwist and precone angles are carried out to know the aeroelastic behavior of the rotor.

• Journal of Welding and Joining
• /
• 제31권4호
• /
• pp.28-33
• /
• 2013

The effects of laser welding beam quality is very large. However, not an analysing case was found for the difference on the plasma emission signal during laser welding according to the beam quality. Therefore, in this study, we compared and evaluated penetration and signal change according to the beam quality at the a similar wavelength band by using a fiber laser and Nd:YAG laser. In addition, we took high speed videography in order to make sure that FFT analysis reflects the actual motion period of keyhole and found the period of video analysis and FFT mostly matched. As a result, it is expected to secure higher reliability than evaluating signal intensity when appling FFT to monitoring.

• 치과방사선
• /
• 제28권1호
• /
• pp.299-309
• /
• 1998

This case was diagnosed as multiple cementoosseous dysplasia on the basis of clinical & radiological features but was diagnosed as ossifying fibroma on the basis of histopathological feature. The histopathologic features of the multiple cementoosseous dysplasia and cementoossifying fibroma have common features of cementum, fibrous network and bone. Multiple cementoosseous dysplasia is reactive lesion and shows restricted lesion size, occurred on anterior and posterior tooth of the mandible and needs no treatement except periodic follow up. But Cementoossifying fibroma is the true neoplasm and grows continuously and needs surgical removal. The final diagnosis of the multiple cementoosseous dysplasia requires good correlation of the clinical, histopathological, and radiological features.