• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.553-558
• /
• 2004

Periodic profiling by level is a conventional method for monitoring topographic changes in a specific part of tidal zone. Periodic aerial photographs are used for monitoring topographic change of broad tidal zone area. In this study, spot heights at interval of 50m on 5 profiling lines were leveled periodically for precise monitoring topographic change of tidal zone. For monitoring broad topographic change of tidal zone, aerial photographs were also taken by film camera loaded on pilotless helicopter periodically Periodic profiling shows the change of heights on the lines well. On the other hand, aerial photographs taken by film camera loaded on pilotless helicopter have some problems to detect topographic change of tidal zone precise. Because the scale and incline of the photographs were not same, it is hard to compare them. Therefore, for more precise monitoring of topographic changes in tidal zone, it is need to take aerial pictures with same scale and same incline.

• Korean Institute of Interior Design Journal
• /
• no.21
• /
• pp.26-32
• /
• 1999

This study is intended to explore the tendency of interior design which have sustained the periodic changes throughout the history. After analysis of changes in interior design from 1920's early modernism to nowadays, the conclusion is as follows. In view of the human psychology, the main trend of consistent periodic changes is the revolutionary change of tension and relaxation, and the pursuit of such a change in design is rooted in the human basic need to get the vital energy through stimuli by giving and taking the variety in the public society.

• Wind and Structures
• /
• v.5 no.2_3_4
• /
• pp.141-150
• /
• 2002

Numerical simulations based on the ALE finite element method are carried out to examine the aerodynamics of an oscillating circular cylinder when the separated shear flows around the cylinder are stimulated by periodic jet excitation with a shear layer instability frequency. The excitation is applied to the flows from two points on the cylinder surface. The numerical results showed that the excitation with a shear layer instability frequency can reduce the negative damping and thereby stabilize the aerodynamics of the oscillating cylinder. The change of the lift phase seems important in stabilizing the cylinder aerodynamics. The change of lift phase is caused by the merger of the vortices induced by the periodic excitation with a shear layer instability frequency, and the vortex merging comes from the high growth rate, the rapid increase of wave number and decrease of phase velocity for the periodic excitation in the separated shear flows.

• Journal of Fashion Business
• /
• v.6 no.3
• /
• pp.60-68
• /
• 2002

Fashion has been affected by the change of periodic conditions. A good example is found in the relationship between fashion and periodic conditions before and after World War I in the U.S. During the pre-wartime, the artificial silhouette achieved through using devices like the corset was popular and then women's dresses were very decorative and gorgeous using a wide variety of details. S-curved silhouettes and Paul Poiret's style will be reviewed as distinctive shapes of pre-war fashion in the beginning of the 20th Century. Through the war, women's rights improved enormously, the use of the automobile increased tremendously, and various kind of sports, the movie industry and ready-to-wear market developed very much. Women's clothes also changed to be much more practical and functional in post-war fashion. It seems that fashion is affected by the change of periodic conditions.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.85.3-85.3
• /
• 2019

Pulsating variable is a star whose luminosity changes through periodic pulsation. There are radiative and dynamical mechanisms hidden in periodic brightness changes, and the physical quantities related with the mechanisms are also expected to vary periodically. The purpose of this study is to investigate the periodic variations of the physical quantities of the ${\delta}$ Scuti type variable, V350 Peg by simultaneous photometry and spectroscopy. In this poster, we present preliminary results on apparent magnitude and radial velocity at the surface.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2146-2148
• /
• 2003

This paper present a modified repetitive control scheme for an optical storage system to track a periodic reference signal with dynamic change in period. Periodic disturbances can be adequately attenuated using the concept of repetitive control, provided the period is know. An optical storage system supports various speeds. To deal with time varying periodic disturbances, an proposed repetitive controller is turned based on repetitive control to change sampling frequency to follow the change of reference Period. A modified repetitive control scheme is proposed and implement on experimental set up of a optical disk driver.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.928-934
• /
• 1998

This paper describes a fully digitalized driver for BLDC motors which is realized by a single chip microprocessor. The speed change can be done by using the signal obtained from the position detecting sensor and adjusting the pulse width at the input channel of power module. In order to establish a speed control system a repetitive control method is adopted to track a periodic refer-ence change in the BLDC motor system. The experimental results show accurate reference track-ing performance under the given periodic reference in the repetitive controller design.

• Journal of Sleep Medicine
• /
• v.15 no.2
• /
• pp.68-73
• /
• 2018

Objectives: Periodic leg movements in sleep (PLMS) are associated with arousals and autonomic activation, which may contribute to higher cardiovascular disease risk in patients with restless legs syndrome (RLS). Non-periodic leg movements in sleep (NPLM) are leg jerks in sleep that does not satisfy standard criteria of PLMS. The aim of this study was to evaluate impact of short-interval leg movements in sleep (SILMS) and isolated leg movements in sleep (ILMS) in comparison to PLMS on heart rate in both patients with RLS and healthy controls. Methods: Seven idiopathic RLS patients and 9 controls were enrolled in this study. Polysomnographic studies were analyzed and leg movements (LM) were automatically detected. NPLM can be classified as SILMS and ILMS. SILMS are LM separated by an inter-movement interval (IMI) shorter than 10 s, and ILMS are LM with IMI longer than 90 s. Frequency and heart rate associated with SILMS, ILMS, and PLMS in RLS patients were compared to those in controls. Heart rate change associated with LM were determined for a fixed time window. Results: Frequencies of SILMS and ILMS of patients with RLS were not significantly different to those of controls. RLS patients presented higher heart rate change associated with SILMS than PLMS before movement onset, while heart rate change associated with SILMS, ILMS, and PLMS were not different in the controls. Conclusions: Although the number of SILMS is not higher than PLMS, SILMS may have closely associated with higher cardiac activation of RLS than PLMS. Therefore, SILMS might be an important treatment target for patients with RLS to reduce long-term cardiovascular risk. Long-term prospective studies are needed to evaluate the relationship between NPLM and cardiovascular disease in patients with RLS.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.92-96
• /
• 2002

This paper is concerned with properties of a Lyapunov functional of state delay systems. It is shown that if a state delay system has a pure imaginary pole for some state delay, then no Lyapunov functional satisfying a Lyapunov condition exists periodically with respect to change of the state delay. This periodic property is unique in state delay systems and has been well known in the frequency domain stability conditions. However, in the time domain stability conditions using a Lyapunov functional, the periodic property is not known explicitly.

• Journal of computational fluids engineering
• /
• v.13 no.3
• /
• pp.44-50
• /
• 2008

The present study is carried out in order to investigate the effect of the periodic acceleration in the stenosed and bifurcated blood vessels. The blood flow and wall shear stress are changed under body movement or acceleration variation. Numerical studies are performed for various periodic acceleration phase angles, bifurcation angles and section area ratios of inlet and outlet. It is found that blood flow and wall shear stress are changed about ${\pm}20%$ and ${\pm}24%$ as acceleration phase angle variation with the same periodic frequency. also wall shear stress and blood flow rate are decreased as bifurcation angle increased.