• Korean Journal of Food Science and Technology
• /
• v.20 no.6
• /
• pp.883-889
• /
• 1988

The salted small shrimps(Acetes japonicus) were fermented for 3 months at room temperature. During the period of fermentation, the changes of shrimp protein properties were determined. The extractability of soluble protein was slightly decreased in 1 month fermentation, but thereafter increased. The contents of 10% TCA soluble fraction were gradually increased during 3 month fermentation, and the rate of 10% TCA soluble fraction/total soluble protein was also greatly increased during the period of fermentation. Sephadex G-100 gel filtration pattern was changed after 1 month fermentation, showing the disappearance of low molecular weight protein peaks, the decomposition and the delay of elution time of main shrimp protein peaks. Polyacrylamide gel disc electrophoresis patterns showed the degradation of main protein bands into lots of smaller bands after 1 month fermentation. The contents of total free amino acids were slightly decreased in 1 month fermentation and then gradually increased during the Period of fermentation. The rate of free amino acids/soluble protein was steadily increased during the period of fermentation, but the rate of free amino acids/10% TCA soluble fraction was decreased continually during the period of fermentation. The contents of most free amino acids were increased during the period of fermentation, but those of histidine and arginine were greatly decreased in 1 month fermentation. Ammonia was increased after 1 month fermentation. The pH value of salted shrimp was slowly changed during 3 months of fermentation, showing increase from 7.8 to 8.2.

• Journal of Korean Academy of Nursing
• /
• v.25 no.1
• /
• pp.5-16
• /
• 1995

The effects of the mouth care using cool sterile normal saline on oral stomatitis were investigated in 59 patients on chemotherapy. The subjects were divided into two groups, one was experimental group(N=31) in which the subjects were provided mouth care 4 times a day (after meals, before bedtime)with cool normal saline, the other was the control group(N=28), The Oral Assessment Guide(OAG) which it includes eight items(voice, swallowing, lips, tongue, salivation, oral mucous membrane, gingiva & teeth) was used to assess oral status six times(once in the Prechernotherapy Period, and on the third, 5th, 7th, 10th & 14th day postchemotherapy). The means of the total scores at each time were analyzed by repeated ANOVA The results are as follows : 1. The incidence of stomatitis was higher in the control group than in experimental group. The incidence of third grade stomatitis characterized by bleeding, sore, infection & severe pain was 3.3% in the experimental group, and while 21.4% in the control group(p=0.01). 2. The number of stomatitis sites which were occurred in the experimental group were significantly lower than in the control group(p=0.046). 3. The grade of stomatitis(mean of total score) for patients in the control group was significantly higher than for patients in the experimental group (p=0.005). 4. In the control group, voice change increased in the period between the seventh and tenth day after chemotherapy (p=0.04). 5. In the control group, swallowing difficulty was mest severe in the period between seventh and tenth day(p=0.05), and decreased by the fourteenth day(p=0.01). 6. Changes in the lips gradually increased after chemotherapy in the control group(p=0.0025), while they were significantly lower in the experimental group(p=0.0002). 7. The increment of tongue changes started on the third day after chemotherapy reached a peak on the tenth day and decreased by the fourteenth day in both groups(p=0.0016). 8. Driness of the mouth reached a peak on the seventh day after chemotherapy in the control group (p=0.05). 9. The degree of oral mucositis was significantly higher in the control group than in the experimental group(p=0.02) . In the control group, the mucosal change started three days after chemotherapy and reached a peak on the tenth day(p=0.03). 10. Changes in the gingia were significantly higher in the control group(p=0.03). In control group, the degree of gingivitis reached a peak on the tenth day. In conclusion, meuth care with normal saline four times a day could reduce the incidence and grade of stomatitis. Stomatitis was shown to begin on the third day after chemetherapy, reach a peak on the tenth day and be reduced by fourteenth day.

• Journal of Korean Port Research
• /
• v.14 no.2
• /
• pp.175-185
• /
• 2000

Today freeway is experiencing a severe congestion with incoming or outgoing traffic through freeway ramps during the peak periods. Thus, the purpose of this study is to identify the traffic characteristics, analyze the relationships between the traffic characteristics and finally construct the delay predictive models on the rap junctions of freeway with 70mph speed limit. From the traffic analyses, and model construction and verification for delay prediction on the ramp junctions of freeway, the following results were obtained : ⅰ) Traffic flow showed a big difference depending on the time periods. Especially, more traffic flows were concentrated on the freeway junctions in the morning peak period. ⅱ) The occupancy also showed a big difference depending on the time periods, and the downstream occupancy(Od) was especially shown to have a higher explanatory power for the delay predictive model construction on the ramp junctions of freeway. ⅲ) The delay-occupancy curve showed a remarkable shift based on the occupancies observed : O$\_$d/〈9% and O$\_$d/$\geq$9%. Especially, volume and occupancy were shown to be highly explanatory for delay prediction on the ramp junctions of freeway under O$\_$d/$\geq$9%, but lowly for delay prediction on the ramp junctions of freeway under O$\_$d/〈9%. Rather, the driver characteristics or transportation conditions around the freeway were thought to be a little higher explanatory for the delay prediction under O$\_$d/〈9%. ⅳ) Integrated delay predictive models showed a higher explanatory power in the morning peak period, but a lower explanatory power in the non-peak periods.

• Korean Journal of Poultry Science
• /
• v.48 no.4
• /
• pp.319-325
• /
• 2021

In this study, we investigated the effects of feeding diets with different levels of energy and nutrient density on the egg quality of laying hens during the pre-peak and peak periods. A total of 192 (Hy-line brown) laying hens were used in a 15-week trial. The hens were randomly allotted to one of four treatments, each with four replicates (12 hens per replication). We assessed the effects of four level of dietary energy (2,710, 2,850, 2,870 and 2,890 kcal/kg) and three levels of nutrient density (Methionine + Cysteine: 0.56%, 0.85%, 0.80% and Crude Protein: 14.5%, 19%, 18%). Differences in the energy and nutrient density contents of diets showed no significant effect (P>0.05) on the average daily gain, average daily feed intake, feed conversion ratio, egg weight, or egg production of hens during the pre-peak and peak periods. However, hens subjected to 2,890 kcal/kg during the pre-peak period were found to lay eggs with significantly thicker shells, and yolk color was found to be significant enhanced in hens fed this diet during the pre-and peak periods. In contrast, we detected no significant effects of dietary energy or nutrient density on the Haugh unit or eggshell strength. In summary, increasing the energy level of diets from 2,710 to 2,890 kcal/kg was found to have positive effects on the shell thickness and yolk color of eggs produced by laying hens.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.2
• /
• pp.35-44
• /
• 2004

In the capacity spectrum method(CSM) using a linear response spectrum, the peak response of an inelastic system under a given earthquake load is estimated transforming the system into the equivalent elastic one. The CSM for estimating the peak inelastic response is evaluated in this paper. The equivalent period and damping ratio are calculated using the ATC-40, G lkan, Kowalsky, and Iwan methods, and the performance points are obtained according to the procedure B of ATC-40. Analysis results indicate that the ATC-40 method generally underestimates the peak response resulting in the unsafe design, while the G lkan and Kowalsky methods overestimate the responses. The Iwan method produces the values between those by the ATC-40 method and the G lkan and Kowalsky methods, and estimates the responses relatively closer to the exact ones. Further, it is found that the Kowalsky method gives the negative equivalent damping ratios depending on the hardening ratios, and thereby can not be used to estimate the responses in some cases.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.2
• /
• pp.1-13
• /
• 2020

There are several methods of peak-shaving, which reduces grid power demand, electricity bought from electricity utility, through lowering "demand spike" during On-Peak period. An optimization method using linear programming is proposed, which can be used to perform peak-shaving of grid power demand for grid-connected PV+ system. Proposed peak shaving method is based on the forecast data for electricity load and photovoltaic power generation. Results from proposed method are compared with those from On-Off and Real Time methods which do not need forecast data. The results also compared to those from ideal case, an optimization method which use measured data for forecast data, that is, error-free forecast data. To see the effects of forecast error 36 error scenarios are developed, which consider error types of forecast, nMAE (normalizes Mean Absolute Error) for photovoltaic power forecast and MAPE (Mean Absolute Percentage Error) for load demand forecast. And the effects of forecast error are investigated including critical error scenarios which provide worse results compared to those of other scenarios. It is shown that proposed peak shaving method are much better than On-Off and Real Time methods under almost all the scenario of forecast error. And it is also shown that the results from our method are not so bad compared to the ideal case using error-free forecast.

• Earthquakes and Structures
• /
• v.5 no.1
• /
• pp.49-65
• /
• 2013

This article presents the statistical characteristics of elastic floor acceleration spectra that represent the peak response demand of non-structural components attached to a nonlinear supporting frame. For this purpose, a set of stiff and flexible general moment resisting frames with periods of 0.3-3.6 sec. are analyzed using forty-nine near-field strong ground motion records. Peak accelerations are derived for each single degree of freedom non-structural component, supported by the above mentioned frames, through a direct-integration time-history analysis. These accelerations are obtained by Floor Acceleration Response Spectrum (FARS) method. They are statistically analyzed in the next step to achieve a better understanding of their height-wise distributions. The factors that affect FARS values are found in the relevant state of the art. Here, they are summarized to evaluate the amplification and/or reduction of FARS values especially when the supporting structures undergo inelastic behavior. The properties of FARS values are studied in three regions: long-period, fundamental-period and short-period. Maximum elastic acceleration response of non-structural component, mounted on inelastic frames, depends on the following factors: inelasticity intensity and modal periods of supporting structure; natural period, damping ratio and location of non-structural component. The FARS values, corresponded to the modal periods of supporting structure, are strongly reduced beyond elastic domain. However, they could be amplified in the transferring period domain between the mentioned modal periods. In the next step, the amplification and/or reduction of FARS values, caused by inelastic behavior of supporting structure, are calculated. A parameter called the response acceleration reduction factor ($R_{acc}$), has been previously used for far-field earthquakes. The feasibility of extending this parameter for near-field motions is focused here, suggested repeatedly in the relevant sources. The nonlinearity of supporting structure is included in ($R_{acc}$) for better estimation of maximum non-structural component absolute acceleration demand, which is ordinarily neglected in the seismic design provisions.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.120-126
• /
• 2011

The fatigue damages in structural details of offshore plants can be accumulated due to various environmental loadings such as swell, wave, wind and current. It is known that load histories acting on mooring and riser systems show stationary and ergodic bimodal wide-banded process. This paper provides refined approach to obtain time signals representing stress range histories from wide-banded bimodal spectrum which consists of ideally narrow-banded and fully separated two spectrums. Variations of the probabilistic characteristics for time signals according to frequency and sampling time increments are compared with the reference data to be the probabilistic characteristics such as zero-crossing period, peak period, and irregularity factor obtained from an assumed ideal spectrum. It is proved that the sampling time increment more affects on the probabilistic characteristics than frequency increment. The fatigue damages according to the frequency and sampling time increments are also compared with the ones with minimum increment condition which are thought to be exact fatigue damage. It is concluded that the maximum sampling time increment to obtain reliable time signals should be determined that ratio of applied maximum sampling time increment and minimum period is less than approximately 0.08.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.7 no.2
• /
• pp.156-163
• /
• 2009

Purpose: Doxylamine succinate (DS) is frequently used to treat insomnia and it may induce rhabdomyolysis in the overdose cases. The purpose of this study is to evaluate the factors that can predict the serum creatine kinase (CK) level normalization time for patients with rhabdomyolysis due to DS ingestion. Methods: This study was conducted on 71 patients who were admitted with rhabdomyolysis after DS ingestion during the period from January 2000 to July 2009. Rhabdomyolysis was defined as a serum CK level over 1,000 U/L. The collected data included the general characteristics, the anticholinergic symptoms, the ingested dose, the peak serum CK level, the time interval (TI) from the event to the peak CK level and the TI from the event to a CK level below 1,000 U/L. We evaluated the correlation between the patients' variables and the TI from the event to the peak CK level time and the time for a CK level below 1,000 U/L. Results: The mean ingested dose per body weight (BW) was $30.86{\pm}18.63\;mg/kg$ and the mean TI from the event to treatment was $4.04{\pm}3.67$ hours. The TI from the event to the peak CK level was longer for the patients with a larger ingestion dose per BW (r=0.587, p<0.05). The CK normalization time was longer for the patients with a larger ingested dose per BW (r=0.446, p<0.05) and a higher peak CK level (r=0.634, p<0.05). Conclusion: The ingested dose per BW was correlated with the TI from the event to the peak CK level, and the ingested dose per BW and the peak CK level have significant correlations with the CK normalization time. These factors may be used to determine the discharge period of patients who had rhabdomyolysis following a OS overdose.

• Journal of the Korean Society of Combustion
• /
• v.4 no.1
• /
• pp.95-103
• /
• 1999

Experimental study on combustion characteristics of a regenerative combustor has performed. High-temperature air combustion in the regenerative combustor is obtained through heat recovery from exhaust gas flow by porous ceramic materials and through alternation of air flow direction through the combustor. Temperature field, CO and NOx emission with respect to the frequency of alternation are measured. It is found that at initial stage of the alternation, temperature of inlet section of main combustion chamber is increased sharply since both high temperature air preheated by the ceramics and prompt fuel injection results in rapid combustion. Following this initial stage, combustion temperature is reduced as the preheated air temperature is reduced. However peak temperature in the chamber and exhaust gas temperature are decreased as the alternation period is reduced, increased temperature of ceramic is observed. CO and NOx emission with respect to the alternation period is also examined. It is found that there exists a range of optimum alternating period for CO and NOx emission characteristics.