• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.314-319
• /
• 2005

In this study, the combustion characteristics were investigated with the variation of design factors on multiple slit gas burner. The design factors consist of slit height, width, spacing, and inner length. The combustion characteristics were made analysis of the CO emission and NOx emission by using CO analyzer and NOx analyzer. The lower perimeter to area and the narrow spacing extends the lift-flame limit. The CO emission increases with the increasing perimeter to area ratio at the same condition. The NOx emission is found to be less significant with the port perimeter to area ratio. The flame interference might highly depend on the spacing and port perimeter to area ratio, and it also affects the burner performance.

• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.139-148
• /
• 2022

Research into wireless sensor networks (WSNs) is a trendy issue with a wide range of applications. With hundreds to thousands of nodes, most wireless sensor networks interact with each other through radio waves. Limited computational power, storage, battery, and transmission bandwidth are some of the obstacles in designing WSNs. Clustering and routing procedures have been proposed to address these concerns. The wireless sensor network's most complex and vital duty is routing. With the Greedy Perimeter Stateless Routing method (GPSR), an efficient and responsive routing protocol is built. In packet forwarding, the nodes' locations are taken into account while making choices. In order to send a message, the GPSR always takes the shortest route between the source and destination nodes. Weighted directed graphs may be constructed utilising four distinct distance metrics, such as Euclidean, city block, cosine, and correlation distances, in this study. NS-2 has been used for a thorough simulation. Additionally, the GPSR's performance with various distance metrics is evaluated and verified. When compared to alternative distance measures, the proposed GPSR with correlation distance performs better in terms of packet delivery ratio, throughput, routing overhead and average stability time of the cluster head.

• Earthquakes and Structures
• /
• 제23권2호
• /
• pp.151-168
• /
• 2022

Torsion is one of the most important causes of building collapse during earthquakes. Sometimes, despite the symmetric form of the building, infill walls disturb the symmetry of the lateral resisting system. The purpose of this research is to investigate the effect of urban layout on developing torsion caused by infill walls. For this purpose, a typological study was conducted based on the conditions of perimeter walls on 364 buildings and then 9 cases were selected. The dimensions of the selected buildings are constant and the conditions of the perimeter walls including facades with openings and cantilevered facades are variable. The selected buildings with 60 different layouts of infill walls were analyzed and the behavior of each one was evaluated based on the torsional irregularity criteria of seismic codes. The results of the analyses showed that if the perimeter walls of a building are symmetric, asymmetric interior walls will not be important in developing torsion and effective parameters in symmetry of the perimeter infill walls are the number of walls, area of openings, aspect ratio, and construction details. Finally, architectural solutions to mitigate the torsional effects of infill walls were proposed for buildings with solid infill walls on some sides, for buildings where the perimeter walls of one side are on the cantilevered part, and for buildings where the perimeter walls of two adjacent sides are on the cantilevered part. In three-sided buildings, where two adjacent façades are cantilevered, it is often impossible to use the potential of the infill walls.

• 조명전기설비학회논문지
• /
• 제13권4호
• /
• pp.21-26
• /
• 1999

지하공간에 있어 자연채광의 도입 효과는 쾌적한 실내 조명환경의 조성과 함께 인공조명 에너지 절감에 따른 실내조명 전력부하를 줄일 수 있을 것이다. 본 논문은 지하공간 Perimeter Occupied Zone에 있어 자연채광 에너지의 적극적 활용을 목적으로 채광덕트 시스템의 이용가능성을 제시하였으며, 컴퓨터 시뮬레이션을 위한 실내면의 상오반사 특성을 고려한 수치해석 프로그램을 개발하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.10-12
• /
• 1996

AlGaAs/GaAs Heterojunotion Bipolar Transistors (HBTs) with various emitter areas were fabricated and the device size dependence on the current gain was examined. With the different emitter areas, the passivated devices having the same peripheral length were fabricated and measured. The measured base current density in the Gummel plots shows an ideality factor of nearly 2. It is found that as the emitter area becomes small, the base current density with the ideality factor of 2 increases linearly, and as the emitter perimeter/area ratio becomes large, the surface recombination current density component increases. The current gain performance in AlGaAs/GaAs HBTs is mainly determined by either the larger emitter area or the smaller ratio of the emitter perimeter to the emitter area. These results will be compared with experimental works for GaInP/GaAs HBTs

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.119-128
• /
• 1998

In this paper, nonsteady state shaped drawing process has been investigated using the three-dimensional rigid-plastic finite element method. In order to analyze the shaped drawing process, a method to define straight converging die considering straight die part, die radius part and bearing part has been proposed. In addition, the modeling of initial billet and the generation procedure of mesh system have been suggested. The three-dimensional rigid-plastic finite element simulation has been performed for a square sectional drawing process and its result has been confirmed in comparison with the existing experimental one. Also, for the same process conditions, the effect of perimeter ratio in the shaped drawing process has been investigated.

• 대한치과교정학회지
• /
• 제31권3호
• /
• pp.347-355
• /
• 2001

상하악 전치부 치열은 치아의 형태 변위, 선천결손 등에 의해 종종 교합관계나 심미성에 문제점을 나타내게 된다. 이러한 문제점을 극복하기 위해 임상의는 전치부 비율을 진단시 이용하게 되나, 치열궁 형태, 견치간 폭경(intercanine width), 치열궁 장경(segment depth)과 치열궁 둘레(arch perimeter)에 따른 전치부 비율의 변화로 인해 이러한 비율을 전치부 교합관계 예측에 직접 적용하는데는 한계가 있다. 이에 본 연구에서는 한국성인 정상교합자 모델(남자:20쌍, 여자:20쌍)에서 상하악 전치부 치열궁 형태를 least square method로 조사하였다. 한국인 정상교합자의 상하악 전치부 치열궁 형태는 다항 함수(polynomial function), 베타 함수(beta function), 하이퍼볼릭 코사인 함수(hyperbolic cosine function) 순으로 곡선 접합(curve fitting)하였으며, 이러한 곡선 접합도는 남녀, 상하악에 관계없이 일정하였다. 또한 곡선접합(curve fitting)된 치열궁 형태를 바탕으로 견치간 폭경(intercanine width), 치열궁 장경(segment depth)과 치열궁 둘레(arch perimeter)간의 상관관계를 구하였다. 이러한 상관관계는 견치간 폭경에 따른 치열궁 형태 예측과 보다 정확한 전치부 비율에 대한 정보를 제공할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.958-964
• /
• 2001

It is difficult to apply a conventional selection guide for diffusers when the diffuser is installed in a perimeter zone, because the ADPI(Air Diffusion Performance Index) vs. T/L(Throw/Length) curve listed in conventional guide does not consider the perimetric heating load. The objective of this study is to evaluate the effect of the perimetric heating load on the ADPI and to propose a selection guide for proper diffuser when perimetric heating load exists. The velocity and temperature distributions and the ADPI value are obtained numerically with various heat load ratios and air flow rates. The ADPI values by numerical result were compared with existing experimental data to verify the method for evaluation of ADPI proposed in present study. In case of a high side wall diffuser, the ADPI decreased with increases of the flow rate on every heat load ratio of present study except 0.75. Also, the ADPI vs. T/L curves have been proposed for the heat load ratios of 0.25, 0.5, 0.75 to guarantee comport thermal environment when diffusers are installed in perimeter zone.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권1호
• /
• pp.59-65
• /
• 2012

The present study was conducted to determine the best level of substitution of soybean meal by sunflower cake in diets for kids through the evaluation of quantitative carcass traits. Thirty-two Boer kids X 1/2 NDB (no defined breed), males, non-castrated, with 4 months of age and initial body weight of $15{\pm}3.2$ kg, were randomly assigned to individual pens. The treatments contained four substitution levels of soybean meal by sunflower cake (0, 33, 66 and 100% DM). At the end of the experimental period, the animals were slaughtered. There was no influence of the treatments on any of the mean values of the evaluated measures (p>0.05): 21.78 kg (body weight at slaughter), 8.65 kg (hot carcass weight), 8.59 kg (cold carcass weight), 40.27% (hot carcass yield), 39.20% (cold carcass yield), 7.73 $cm^2$ (rib eye area), 46.74 cm (carcass outer length), 45.68 cm (carcass internal length), 36.92 cm (leg length), 26.04 cm (leg perimeter), 48.66 cm (hind perimeter), 58.62 cm (thoracic perimeter), 0.20 (carcass compactness index), 68.48% (total muscle of the leg), 2.79% (total leg fat), 55.19% (subcutaneous leg fat), 28.82% (total bone), 81.66 g (femur weight), 14.88 cm (femur length), 0.38 (leg muscularity index), 2.53 (muscle:bone ratio) and 33.42 (muscle:fat ratio). The substitution of soybean meal by sunflower cake may be recommended up to a level of 100% without alterations to quantitative carcass traits.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2000년도 추계총회 및 학술발표회
• /
• pp.7-7
• /
• 2000