• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.314-319
• /
• 2005

In this study, the combustion characteristics were investigated with the variation of design factors on multiple slit gas burner. The design factors consist of slit height, width, spacing, and inner length. The combustion characteristics were made analysis of the CO emission and NOx emission by using CO analyzer and NOx analyzer. The lower perimeter to area and the narrow spacing extends the lift-flame limit. The CO emission increases with the increasing perimeter to area ratio at the same condition. The NOx emission is found to be less significant with the port perimeter to area ratio. The flame interference might highly depend on the spacing and port perimeter to area ratio, and it also affects the burner performance.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.139-148
• /
• 2022

Research into wireless sensor networks (WSNs) is a trendy issue with a wide range of applications. With hundreds to thousands of nodes, most wireless sensor networks interact with each other through radio waves. Limited computational power, storage, battery, and transmission bandwidth are some of the obstacles in designing WSNs. Clustering and routing procedures have been proposed to address these concerns. The wireless sensor network's most complex and vital duty is routing. With the Greedy Perimeter Stateless Routing method (GPSR), an efficient and responsive routing protocol is built. In packet forwarding, the nodes' locations are taken into account while making choices. In order to send a message, the GPSR always takes the shortest route between the source and destination nodes. Weighted directed graphs may be constructed utilising four distinct distance metrics, such as Euclidean, city block, cosine, and correlation distances, in this study. NS-2 has been used for a thorough simulation. Additionally, the GPSR's performance with various distance metrics is evaluated and verified. When compared to alternative distance measures, the proposed GPSR with correlation distance performs better in terms of packet delivery ratio, throughput, routing overhead and average stability time of the cluster head.

• Earthquakes and Structures
• /
• v.23 no.2
• /
• pp.151-168
• /
• 2022

Torsion is one of the most important causes of building collapse during earthquakes. Sometimes, despite the symmetric form of the building, infill walls disturb the symmetry of the lateral resisting system. The purpose of this research is to investigate the effect of urban layout on developing torsion caused by infill walls. For this purpose, a typological study was conducted based on the conditions of perimeter walls on 364 buildings and then 9 cases were selected. The dimensions of the selected buildings are constant and the conditions of the perimeter walls including facades with openings and cantilevered facades are variable. The selected buildings with 60 different layouts of infill walls were analyzed and the behavior of each one was evaluated based on the torsional irregularity criteria of seismic codes. The results of the analyses showed that if the perimeter walls of a building are symmetric, asymmetric interior walls will not be important in developing torsion and effective parameters in symmetry of the perimeter infill walls are the number of walls, area of openings, aspect ratio, and construction details. Finally, architectural solutions to mitigate the torsional effects of infill walls were proposed for buildings with solid infill walls on some sides, for buildings where the perimeter walls of one side are on the cantilevered part, and for buildings where the perimeter walls of two adjacent sides are on the cantilevered part. In three-sided buildings, where two adjacent façades are cantilevered, it is often impossible to use the potential of the infill walls.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.21-26
• /
• 1999

Using daylight in underground spoce may significantly reduce electric lighting load and give a visually comfortable environment. This reper describes a fundaIrentaI study on light duct system to predict inter illuminance ratio on underground periIreter occupied zone level. As a result, integral equation for inter-reflection program are developed and by using optimize light duct system can gives daylight on deep underground space. space.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.10-12
• /
• 1996

AlGaAs/GaAs Heterojunotion Bipolar Transistors (HBTs) with various emitter areas were fabricated and the device size dependence on the current gain was examined. With the different emitter areas, the passivated devices having the same peripheral length were fabricated and measured. The measured base current density in the Gummel plots shows an ideality factor of nearly 2. It is found that as the emitter area becomes small, the base current density with the ideality factor of 2 increases linearly, and as the emitter perimeter/area ratio becomes large, the surface recombination current density component increases. The current gain performance in AlGaAs/GaAs HBTs is mainly determined by either the larger emitter area or the smaller ratio of the emitter perimeter to the emitter area. These results will be compared with experimental works for GaInP/GaAs HBTs

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.119-128
• /
• 1998

In this paper, nonsteady state shaped drawing process has been investigated using the three-dimensional rigid-plastic finite element method. In order to analyze the shaped drawing process, a method to define straight converging die considering straight die part, die radius part and bearing part has been proposed. In addition, the modeling of initial billet and the generation procedure of mesh system have been suggested. The three-dimensional rigid-plastic finite element simulation has been performed for a square sectional drawing process and its result has been confirmed in comparison with the existing experimental one. Also, for the same process conditions, the effect of perimeter ratio in the shaped drawing process has been investigated.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.347-355
• /
• 2001

Maxillary and mandibular anterior dental arches often have the problems of occlusal relation and esthetics by malformations of teeth, congenital missing, et at. Though the clinician usually use the anterior ratio to overcome this problems, he has the limitation of a direct application this ratio to the prediction of anterior occlusal relationship by the change of anterior ratio as dental arch form, intercanine width, segment depth and arch perimeter. So this study examine maxillary and mandibular anterior dental arch forms by least square method using Korean normal occlusion models(man : 20 casts, woman : 20 casts). Maxillary and mandibular anterior dental arches of Korean normal occlusion models are curve fitted to polynomial function, beta function, hyperbolic cosine function in order. And this accuracy of curve fitting is constant regardless of man/woman and maxilla/mandible. The relationships between intercanine width, segment depth, and arch perimeter based on this owe fitted dental arch form are acquired. This relationships will give the prediction of anterior dental arch form and the information of more accurate anterior ratio according to intercanine width.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.958-964
• /
• 2001

It is difficult to apply a conventional selection guide for diffusers when the diffuser is installed in a perimeter zone, because the ADPI(Air Diffusion Performance Index) vs. T/L(Throw/Length) curve listed in conventional guide does not consider the perimetric heating load. The objective of this study is to evaluate the effect of the perimetric heating load on the ADPI and to propose a selection guide for proper diffuser when perimetric heating load exists. The velocity and temperature distributions and the ADPI value are obtained numerically with various heat load ratios and air flow rates. The ADPI values by numerical result were compared with existing experimental data to verify the method for evaluation of ADPI proposed in present study. In case of a high side wall diffuser, the ADPI decreased with increases of the flow rate on every heat load ratio of present study except 0.75. Also, the ADPI vs. T/L curves have been proposed for the heat load ratios of 0.25, 0.5, 0.75 to guarantee comport thermal environment when diffusers are installed in perimeter zone.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.1
• /
• pp.59-65
• /
• 2012

The present study was conducted to determine the best level of substitution of soybean meal by sunflower cake in diets for kids through the evaluation of quantitative carcass traits. Thirty-two Boer kids X 1/2 NDB (no defined breed), males, non-castrated, with 4 months of age and initial body weight of $15{\pm}3.2$ kg, were randomly assigned to individual pens. The treatments contained four substitution levels of soybean meal by sunflower cake (0, 33, 66 and 100% DM). At the end of the experimental period, the animals were slaughtered. There was no influence of the treatments on any of the mean values of the evaluated measures (p>0.05): 21.78 kg (body weight at slaughter), 8.65 kg (hot carcass weight), 8.59 kg (cold carcass weight), 40.27% (hot carcass yield), 39.20% (cold carcass yield), 7.73 $cm^2$ (rib eye area), 46.74 cm (carcass outer length), 45.68 cm (carcass internal length), 36.92 cm (leg length), 26.04 cm (leg perimeter), 48.66 cm (hind perimeter), 58.62 cm (thoracic perimeter), 0.20 (carcass compactness index), 68.48% (total muscle of the leg), 2.79% (total leg fat), 55.19% (subcutaneous leg fat), 28.82% (total bone), 81.66 g (femur weight), 14.88 cm (femur length), 0.38 (leg muscularity index), 2.53 (muscle:bone ratio) and 33.42 (muscle:fat ratio). The substitution of soybean meal by sunflower cake may be recommended up to a level of 100% without alterations to quantitative carcass traits.

• 한국전기화학회:학술대회논문집
• /
• 2000.10a
• /
• pp.7-7
• /
• 2000