• 대한치과교정학회지
• /
• 제34권1호
• /
• pp.1-11
• /
• 2004

치열궁내의 공간 부조화를 단순히 가용 arch perimeter에 대한 tooth material의 총합의 차이만으로 예측하는 것은 치아의 이동을 단지 평면적으로만 해석한 것인 반면, 실제로 치아는 치료에 의해 3차원적으로 움직이게 되어 치열궁 형태와 curve of Spee의 정도 그리고 치축 각도와 경사에도 영향을 받게 된다. 본 연구는 교정환자의 치료전 모형분석시 치열궁내 공간 부조화를 보다 분석적으로 평가하기 위해 소구치 발치 후 arch perimeter의 감소와 전치부의 전후방적인 이동량간의 관계를 알아보고 아울러 curve of Spee와 기저골내 기준평면에 대한 전치부의 치축 각도 그리고 전치부 총생등이 어떤 영향을 미치는 지에 대해 고찰해 보고자 한다. 연세대학교 치과대학병원 교정과에 내원하여 교정치료를 받은 환자 중 Angle씨 제 I급 부정교합이며 4개의 제 1소구치를 발거한 양악 전돌자로서 치아에 형태학적 변이 및 보철물을 갖지 않은 자, 치아수에 이상이 없는 자, 교모나 이소맹출치를 갖지 않은 자, 견치 및 대구치가 Angle씨 제 I급 교합관계를 가지며 3m이상의 치아밀집을 갖지 않은 자를 대상으로 하여 치아모형 분석 결과 다음과 같은 결론을 얻었다. 1. 견치간 폭경이 유지될 경우, 제 1소구치 발거 후 하악 중절치가 후방이동 될 수 있는 공간의 양은 소구치 발거 공간의 크기보다 크게 나타났으며, 그 차이는 1mm보다 작았다. 이때 치열궁의 형태가 전방으로 좁아질수록 그 차이가 증가하였다. 2. 견치간 폭경이 구치부의 폭경에 일치되게 확장될 경우 견치간 폭경이 유지될 때보다 3mm내외의 중절치의 후방이 동이 가능한 것으로 나타났다. 3. 중절치의 후방이동시 치체이동과 경사이동에서 가능한 절연의 전후방적인 차이가 미세하게 나타났다. 4. 견치간 폭경을 유지하면서 전치부 분절내 총생을 해소할 경우, 처음의 전치부 분절의 장경이 클수록 중절치의 전방 이동량이 증가하였다. 5. Curve of Spee를 leveling할 경우, arch perimeter의 증가량은 Curve of Spee의 최대 길이의 1/2보다 적게 나타났다.

• Journal of Biosystems Engineering
• /
• 제15권1호
• /
• pp.23-32
• /
• 1990

Geometrical characteristics of fruit including perimeter, projected area and length of minor and major axis were calculated by computer programs to be used in fruit sorting by image processing system. The results are summerized as follows. 1. A program calculating perimeter, projected area, and length of minor and major axis by edge detection and chain code was developed. 2. Geometrical characteristics of given figures were calculated to verify the program and the discrepancies from the measured values were about 5%. 3. Regression models for estimating volums of apples were developed and regression coefficients for each variety were found. 4. Abnormal apples could be recognized by comparing the ratio of minor axis to major axis and the standard value was proposed.

• 호남수학학술지
• /
• 제39권2호
• /
• pp.247-258
• /
• 2017

For a quadrilateral P, we consider the centroid $G_0$ of the vertices of P, the perimeter centroid $G_1$ of the edges of P and the centroid $G_2$ of the interior of P, respectively. It is well known that P satisfies $G_0=G_1$ or $G_0=G_2$ if and only if it is a parallelogram. In this note, we investigate various quadrilaterals satisfying $G_1=G_2$. As a result, for example, we show that among circumscribed quadrilaterals kites are the only ones satisfying $G_1=G_2$. Furthermore, such kites are completely classified.

• 국제초고층학회논문집
• /
• 제5권3호
• /
• pp.213-220
• /
• 2016

The "China Zun" tower in Beijing will rise to 528 meters in height and will be the tallest building in Beijing once built. Inspired by an ancient Chinese vessel, the "Zun", the plan dimensions reduce gradually from the bottom of the tower to the waist and then expand again as it rises to form an aesthetically beautiful and unique geometry. To satisfy the structural requirement for seismic and wind resistance, the structure is a dual system composed of a perimeter mega structure made of composite mega columns, mega braces, and belt trusses, and a reinforced-concrete core with steel plate-embedded walls. Advanced parametric design technology is applied to find the most efficient outer-perimeter structure system. The seismic design basically follows a mixed empirical and performance-based methodology that was verified by a shaking table test and other specimen lab tests. The tower is now half-way through its construction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.138-141
• /
• 2006

Shear wall-frame system is one of the most, if not the most, popular system for resisting lateral loads. The core is the primary lateral load-resisting systems, the perimeter frame is designed for gravity loads, and the connection between perimeter frame and core is generally a shear connection. Specially, single plate shear connection have gained considerable popularity in recent years due to their ease of fabrication and erection. Single plate shear connection should be designed to satisfy the dual criteria of shear strength and rotational ductility. An experimental program was undertaken to evaluate seismic behavior of single plate shear connection. The main test variable is the reinforcing detail of connection. Through the experimental program, the cyclic behavior of typical and reinforcing single plate shear connection was established.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.589-593
• /
• 2005

It is well known that proper encapsulation is crucial for the lifetime of organic light emitting diode (OLED) displays. With the development of increasingly better barrier coatings and perimeter seals, it has now become very desirable to be able to precisely measure the rate of water vapor and oxygen permeation through barrier coatings and perimeter sealing. This paper demonstrates a new permeation measurement method that uses tritium-containing water (HTO) as a tracer material. The theoretical detection limit of this direct method is $2.4{\times}10^{-8}g/(m^2day)$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.334-337
• /
• 1987

An algorithm is presented which computes the perimeter of regions in images represented by BF( breadth first) linear quadtree. In order to compute the perimeter, we determine adjacent neighbor nodes in the horizontal and vertical directions. It is the method which directly find the associated nodes in order to know whether it exists in BF linear quad tree or not. Average execution time of the algorithm is proportional to the number of black nodes in the quadtree.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.10-12
• /
• 1996

AlGaAs/GaAs Heterojunotion Bipolar Transistors (HBTs) with various emitter areas were fabricated and the device size dependence on the current gain was examined. With the different emitter areas, the passivated devices having the same peripheral length were fabricated and measured. The measured base current density in the Gummel plots shows an ideality factor of nearly 2. It is found that as the emitter area becomes small, the base current density with the ideality factor of 2 increases linearly, and as the emitter perimeter/area ratio becomes large, the surface recombination current density component increases. The current gain performance in AlGaAs/GaAs HBTs is mainly determined by either the larger emitter area or the smaller ratio of the emitter perimeter to the emitter area. These results will be compared with experimental works for GaInP/GaAs HBTs

• 복식문화학회:학술대회논문집
• /
• 복식문화학회 2005년도 Joint International Conference
• /
• pp.48-54
• /
• 2005

In order to mass-customize clothes, it is essential to take into account individual body shape using computerized 3D body models. This paper describes the development of an interactive body model that can be altered to match individual body perimeter, postures and depth for the purpose of computerized pattern making. Construction of the body model requires the extraction of necessary points, adjustment of coordinate points, linking of points by spline curves, control of section lengths and selectability of various hip types. Front to back depth of the model is adjusted by scaling ratio. We had a great result for controlling perimeter, posture and depth of body shapes. The results support the adaptability and potential usefulness of the posture and depth adjustable body model.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.627-638
• /
• 1999

In this paper, the system with an artificial intelligent that is able itself to adjust the perimeter condition of the plant is presented. The proposed intelligent system is composed of two learning vector quantization(LVQ) networks, which are used mostly in the field of the pattern recognition and signal processing. From the external condition of the plant, the first LVQ network recognizes the pattern of the sensed signal and the second LVQ network judges synthetically user's characteristics and performs learning. The controller controls the plant using the reference value, which is the output value of the synthetic judgement part. In order to verify the usefulness of the proposed method, we simulated the two LVQs are implemented for the artificial intelligent illuminator as well as being carried out computer simulations. We implemented the proposed artificial intelligent illuminator and perform the experiment.