• Journal of the Korean Society of Physical Medicine
• /
• 제8권3호
• /
• pp.327-335
• /
• 2013

PURPOSE: The purpose of this study is to investigate effects of trunk position sense through visual cue deprivation balance training in subacute stroke patients. METHODS: The subjects were randomly allocated to two groups: experimental(n=10) and control(n=10). Both groups performed balance training on sitting for 30minute after measurements. Trunk position sense test was assessed using the David back concept to determine trunk repositioning error for four movement(flexion, extension, affected side lateral flexion, non-affected side lateral flexion). Measurements on each test were assessed prior to the balance training and then immediately following the balance training. RESULTS: In comparison of the difference of the trunk position sense between groups, the experimental group decreased significantly in trunk repositioning error of flexion, extension and affected side lateral flexion than control group(p<.05). CONCLUSION: The trunk position sense of the experimental group showed more improvement after the balance training program compared to the control group, Therefore, these results suggest that visual cue deprivation training is considered an effective exercise method for individuals with subacute stroke.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권4호
• /
• pp.411-419
• /
• 2000

Purpose: This study was aimed at analysis of the changes in the condyle position in subjects with mandibular setback osteotomies Method: Twenty patients were evaluated retrospectively for their changes in the condyle position who underwent surgical mandibular setback using bilateral sagittal split osteotomies with a manual condyle repositioning technique and rigid fixation. The cephalometric and panoramic analysis was performed preoperatively, 1 week, 6 months, and 1 year postoperatively. And postoperative noise, temporomandibular joint pain, and mouth opening were clinically examined 2 months, 4 months, 6 months, 8 months, 10 months, and 12 months postoperatively. Result: The condyles rotated posteriorly and laterally immediately after surgery, and they returned to the preoperative position during follow-up period but it is not significant. The statistical analysis (Paired t-test) showed no significant effects in postsurgical stability. The changes in the condyle position didn't have a significant harmful influence on temporomandibular joint disorder. Conclusion: A careful surgical mandibular setback using manual condyle repositioning and fixation technique will move condyle minimally and that will decrease the relapse and temporomandibular joint disorder.

• Journal of Auto-vehicle Safety Association
• /
• 제10권3호
• /
• pp.32-37
• /
• 2018

Recently, the driver can be assisted by the advanced active safety devices such as ADAS from road traffic risks. With this system, driver and passenger may freed from can driving tasks or kept eyes on forward direction while on the road. Help from adoptive cruise control, auto parking and newly develped automated driving vehicles technologies, the driver positions will vary significantly from the current standard driver position during the travel time. On this hypothesis, the objective of this study is analyze the behavior and injuries of drivers in the event of frontal impact under these abnormal driver position. Based on the KNCAP frontal impact testing method, this simulation matrix was set-up with dummies of 5 th tile female Hybrid III dummy and 50 th tile male Hybrid III dummy. The small sedan type passenger car was modeled in this simulation. The series of simulation was performed to compare the injuries and behaviour of each dummy, varying the seating status and seat position of each dummy.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.270-273
• /
• 2003

The strain measurement of the panel in the sheet metal forming is essential work which provides experimental data needed to die design, process design, and product inspection. To measure efficiently the complex geometry strain, the 3-dimensional automative strain measurement system, which has high accuracy in theory, but has some 3∼5% errors in practice, is often used. The object of this study is to develop the error compensation technology to eliminate the strain, errors resulted when formed panels are measured using an automated strain measurement system. To achieve the study object, the position error calibration method correcting coordinates of the grid node recognized by a camera using error functions is suggested. Then the position errors were found by calculating the difference in the position of the cube node between real coordinates and measured coordinates in toms of node coordinates and the error calibration equations were derived by regressing the position errors. In order to show the validation of the suggested position error calibration method, finite element analysis and current calibration method was performed for the initial-blankformed.

• Journal of the Korea Fashion and Costume Design Association
• /
• 제17권3호
• /
• pp.61-71
• /
• 2015

In this study, visual evaluation was performed with changes in peplums design to provide data which can enhance wearing image effects at the production of peplums one-piece. According to changes in volume and position of peplums, a total of 9 stimulants were chosen. Then, they were evaluated using a seven-point rating scale against 50 fashion students. The data has been analyzed by Factor Analysis, ANOVA, $Scheff{\acute{e}}$'s Test and the MCA method. The results of the study are as follows : 1. According to factor analysis, the components of visual evaluation depending on the changes in volume and position variations of peplums were divided into four factors: elegance, individuality, upper body correction and upper body emphasis. 2. According to visual evaluation depending on changes in the position variations of peplum, 'high waist' and 'natural waist' revealed a significant difference in elegance, individuality and upper body correction. 'Low waist' was observed in all four positions. 3. According to visual evaluation depending on the changes in volume of peplums, a significant difference at $45^{\circ}$ was observed in except for elegance. Significant differences at $90^{\circ}$ and $180^{\circ}$ were observed in all four positions. 4. In terms of interactions over in volume and position variations of peplums, interaction effects were found in two factors.

• Journal of Institute of Control, Robotics and Systems
• /
• 제3권5호
• /
• pp.497-502
• /
• 1997

In this study an automatic rolling-coil labeling system using robot vision system and peripheral mechanism is proposed and implemented, which instead of the manual labor to attach labels Rolling-coils in a steel mill. The binary image process for the image processing is performed with the threshold, and the contour line is converted to the binary gradient which detects the discontinuous variation of brightness of rolling-coils. The moments invariant algorithm proposed by Hu is used to make it easy to recognize even when the position of the center are different from the trained data. The position error compensation algorithm of six degrees of freedom industrial robot manipulator is also developed and the data of the position of the center rolling-coils, which is obtained by floor mount camera, are transferred by asynchronous communication method. Therefore, even if the position of center is changed, robot moves to the position of center and performs the labeling work successfully. Therefore, this system can be improved the safety and efficiency.

• The Journal of Korean Physical Therapy
• /
• 제32권1호
• /
• pp.52-57
• /
• 2020

Purpose: This study compared the muscle activities of the Vastus medialis oblique (VMO) and the Vastus lateralis (VL) at three different knee extension angles: 90°, 135°, and 180° in the sitting position. Methods: Twenty subjects between 20 and 30 years of age participated in the study. A mobile phone application called the Clinometer was used to measure the knee joint angle. Electromyography (EMG) was performed to measure the muscle activities of the VMO and VL muscles during knee isometric extension exercises. The pulling sensor was used to maintain 70% of the maximum strength of the knee extensor continuously in the sitting position. After attaching the EMG sensor, the subjects were asked to perform isometric knee extension exercises randomly among three knee extension angles (90°, 135°, or 180°) in the sitting position. One-way repeated measures analysis of the variance and a Bonferroni post hoc test was used to identify the VMO and VL muscle activity during knee extension angles among 90°, 135°, and 180°. Results: The VMO and VL muscle activities increased with increasing knee extension angle in the sitting position (p<0.01). Conclusions: Knee extension exercise at a 180° angle in the sitting position can be recommended to increase the muscle activity of the VMO and VL muscle activities efficiently.

• Journal of Sensor Science and Technology
• /
• 제29권4호
• /
• pp.237-242
• /
• 2020

This paper deals with relative position estimation using a Kalman filter (KF) based on inertial sensors that have been widely used in various biomechanics-related outdoor applications. In previous studies, the relative position is determined using relative orientation and predetermined segment-to-joint (S2J) vectors, which are assumed to be constant. However, because body segments are influenced by soft tissue artifacts (STAs), including the deformation and sliding of the skin over the underlying bone structures, they are not constant, resulting in significant errors during relative position estimation. In this study, relative position estimation was performed using a KF, where the S2J vectors were adopted as time-varying states. The joint constraint and the variations of the S2J vectors were used to develop a measurement model of the proposed KF. Accordingly, the covariance matrix corresponding to the variations of the S2J vectors continuously changed within the ranges of the STA-causing flexion angles. The experimental results of the knee flexion tests showed that the proposed KF decreased the estimation errors in the longitudinal and lateral directions by 8.86 and 17.89 mm, respectively, compared with a conventional approach based on the application of constant S2J vectors.

• Journal of Institute of Control, Robotics and Systems
• /
• 제8권3호
• /
• pp.208-219
• /
• 2002

A novel measurement method to obtain the 6-DOF motions of arbitrary rigid bodies is proposed in this paper. The method adopts a specially fabricated mirror called 3-facet mirror, which looks like a triangular pyramid haying an equilateral cross-sectional shape. The mirror is mounted on the objects to be measured, illuminated by a laser beam having circular profile, and reflects the laser beam in three different directions. Three PSDs(position sensitive detector) detect the three beams reflected by the mirror, respectively. From the signals of the PSDs, we can calculate the 3-dimensional position and orientation of the 3-facet mirror, and thus enabling us to determine the 3-dimensional position and orientation of the objects. In this paper, we model the relationship between the 3-dimensional position and orientation of an object in motion and the outputs of three PSDs. A series of experiments are performed to demonstrate the effectiveness and accuracy of the proposed method. The experimental results show that the proposed sensing system can be an effective means of obtaining 3-dimensional position and orientation of arbitrary objects and provide resonable measurement accuracy.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1712-1721
• /
• 2004

A method of measuring the thermal diffusivity of semi-infinite solid material at room temperature using photothermal displacement is proposed. In previous works, within the constant thickness of material, the thermal diffusivity was determined by the magnitude and phase of deformation gradient as the relative position between the pump and probe beams. In this study, however, a complete theoretical treatment of the photothermal displacement technique has been performed for thermal diffusivity measurement in semi-infinite solid materials. The influence of parameters, such as, radius and modulation frequency of the pump beam and the thermal diffusivity, was studied. We propose a simple analysis method based on the zero -crossing position of real part of deformation gradient and the minimum position of phase as the relative position between two beams. It is independent of parameters such as power of pump beam, absorption coefficient, reflectivity, Poisson's ratio, and thermal expansion coefficient.