• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.348-348
• /
• 2011

Carbon nanotube (CNT) field effect transistors and sensors use CNT as a current channel, of which the resistance varies with the gate voltage or upon molecule adsorption. Since the performance of CNT devices depends very much on the CNT/metal contact resistance, the CNT/electrode contact must be stable and the contact resistance must be small. Depending on the geometry of CNT/electrode contact, it can be categorized into the end-contact, embedded-contact (top-contact), and side-contact (bottom-contact). Because of difficulties in the sample preparation, the end-contact CNT device is seldom practiced. The embedded-contact in which CNT is embedded inside the electrode is desirable due to its rigidness and the low contact resistance. Fabrication of this structure is complicated, however, because each CNT has to be located under a high-resolution microscope and then the electrode is patterned by electron beam lithography. The side-contact is done by depositing CNT electrophoretically or by precipitating on the patterned electrode. Although this contact is fragile and the contact resistance is relatively high, the side-contact by far has been widely practiced because of its simple fabrication process. Here we introduce a simple method to embed CNT inside the electrode while taking advantage of the bottom-contact process. The idea is to utilize a eutectic material as an electrode, which melts at low temperature so that CNT is not damaged while annealing to melt the electrode to embed CNT. The lowering of CNT/Au contact resistance upon annealing at mild temperature has been reported, but the electrode in these studies did not melt and CNT laid on the surface of electrode even after annealing. In our experiment, we used a eutectic Au/Al film that melts at 250$^{\circ}C$. After depositing CNT on the electrode made of an Au/Al thin film, we annealed the sample at 250$^{\circ}C$ in air to induce eutectic melting. As a result, Au-Al alloy grains formed, under which the CNT was embedded to produce a rigid and low resistance contact. The embedded CNT contact was as strong as to tolerate the ultrasonic agitation for 90 s and the current-voltage measurement indicated that the contact resistance was lowered by a factor of 4. By performing standard fabrication process on this CNT-deposited substrate to add another pair of electrodes bridged by CNT in perpendicular direction, we could fabricate a CNT cross junction. Finally, we could conclude that the eutectic alloy electrode is valid for CNT sensors by examine the detection of Au ion which is spontaneously reduced to CNT surface. The device sustatined strong washing process and maintained its detection ability.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.329-334
• /
• 2004

The electronic nose (E-nose) recently finds its applications in medical diagnosis, specifically on detection of diabetes, pulmonary or gastrointestinal problem, or infections by examining odors in the breath or tissues with its odor characterizing ability. The odor recognition performance of E-nose can be improved by manipulating the sensor array responses of vapors in time-profile forms. The different chemical interactions between the sensor materials and the volatile organic compounds (VOC's) leave unique marks in the signal profiles giving more information than collection of the conventional piecemal features, i.e., maximum sensitivity, signal slopes, rising time. In this study, to use them in vapor recognition task conveniently, a novel time-profile method was proposed, which is adopted from digital image pattern matching. The degrees of matching between 8 different vapors were evaluated by using the proposed method. The test vapors are measured by the silicon-based gas sensor array with 16 CB-polymer composites installed in membrane structure. The results by the proposed method showed clear discrimination of vapor species than by the conventional method.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.6
• /
• pp.221-228
• /
• 2018

With an increase in demand for the high added value of shipbuilding and marine industry based on the information and communications technology (ICT), software technology has become more important than ever in the industry. In this paper, we present the result of our preliminary investigation on the current software development environment in the shipbuilding and marine industry in order to develop reusable software component, which can enhance the competitiveness of software development. The investigation is performed based on the survey answers from 34 developers who are working in different shipbuilding and marine companies. The questionnaire is composed of items to gather the information of each company such as the number of employees and product domain, and actual software development environment such as operating system, programming languages, deployment format, obstacles for developing components, and the adoption of software development methods and tools. According to the results of the survey, the most important consideration to select their development platform was the number of available utilities and the technical supports, followed by performance, price and security problems. In addition, the requirements of various platforms supporting and the higher reliability, and the limitations of low development cost and manpower made it difficult for them to develop reusable software components. Finally, throughout the survey, we find out that only 15% of developers used software development processes and managed the quality to systematically develop their software products, therefore, shipbuilding and marine companies need more technical and institutional support to improve their ability to develop high qualified software.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.2
• /
• pp.12-20
• /
• 2015

The public employers are faced the mounting importance of decision process to settle the optimum VE delivery system of such public facilities buildings and etc. The elements of decision process of the public employer are formed in the various relationships of the concerned and when the projects are coming into effect, the decision process in the VE delivery method and the selection of contractor will be the name of the game. The decision process in the VE delivery method and the selection of contractor are created a case to be one and the same as well as initiates a consistency for the performance. However, the function and role of the public employer are projective accordingly to the organization of employer and the employer especially no system is equal to the capability of perfect evaluation and verification of the ability of the employer. Especially the lowest bidder policy that started with justification to increase the competitiveness and technical capability of the contractors through the completion in between contractors has been providing the hotbed for insolvency, irregularity and irrationality as a result. From this point of view it is declared that the buildup the edifice of supporting system in the process of decision to recover the mutual trust and respect of the concerned in the VE delivery system with the technostress and the systematization based on drawing the elements which affect the decision process of public employer.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.5
• /
• pp.204-213
• /
• 2008

Apartments production without a previous example is existed by suddenly rapid growth of population and city. So this mass producted aged Apartments have many problems that is aged and staleness. Confrontation of obsolete and staleness is Build&Scrap and Remodeling. But Remodeling is much better than Build&Scrap Because Remodeling has Social, Economical, Environmental merits. This Research is Feasibility Evaluation System on an object of Remodeling. Feasibility Evaluation means Possibility on Objective action on aiming action in other words. It means degree of difficulty about purpose to act. Remodeling is based on existing apartment, to improve ability and performance of existed aged Apartment and by engineering technique and method. A point of view, development of Remodeling technique and popularization is necessary as well as Remodeling Plan and Construction technique of applied Existing building logical Approach is that. The purpose of this paper is handling allowance range of Remodeling Plan and Achievement accomplishment Feasibility Evaluation of purpose and objective and Understanding. Remodeling Feasibility is evaluated by two aspects. The first is Macro Level Approach of Remodeling Feasibility Evaluation on a Apartment Complex, and The second is Micro Level Approach of Remodeling Feasibility on each housing part is evaluated about removal and dismantlement.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.717-724
• /
• 2010

The flash point is one of the most important physical properties used to determine the potential for fire and explosion hazards of flammable liquids. Despite the needs of the experimental flash point data for the design and construction of chemical plants, there is often a significant gap between the demands for the data and their availability. This study have built and compared two models of partial least squares(PLS) and support vector machine(SVM) to predict the experimental flash points of 893 organic compounds out of DIPPR 801. As the independent variables of the models, 65 functional groups were chosen based on the group contribution method that was oriented from the assumption that each fragment of a molecule contributes a certain amount to the value of its physical property, and the logarithm of molecular weight was added. The prediction errors calculated from cross-validation were employed to determine the optimal parameters of two models. And, an optimization technique should be used to get three parameters of SVM model. This work adopted particle swarm optimization that is one of heuristic optimization methods. As the selection of training data can affect the prediction performance, 100 data sets of randomly selected data were generated and tested. The PLS and SVM results of the average absolute errors for the whole data range from 13.86 K to 14.55 K and 7.44 K to 10.26 K, respectively, indicating that the predictive ability of the SVM is much superior than PLS.

• Physical Therapy Korea
• /
• v.27 no.3
• /
• pp.178-184
• /
• 2020

Background: Stroke patients have reduced trunk control compared to normal people. The ability to control the trunk of a stroke patient is important for gait and balance. However, there is still a lack of research methods for the characteristics of stroke control in stroke patients. Objects: The aim of this research was to determine whether trunk position sense has any relation with balance and gait. Methods: This study assessed trunk performance by measuring position sense. Trunk position sense was assessed using the David back concept to determine trunk repositioning error in 20 stroke patients and 20 healthy subjects. Four trunk movements (flexion, extension, lateral flexion, rotation) were tested for repositioning error and the measurement was carried out 6 times per move; these parameters were used to compare the mean values obtained. Subjects with stroke were also evaluated with clinical measures of balance and gait. Results: There were significant differences in trunk repositioning error between the stroke group and the control group in flexion, lateral flexion to the affected side, lateral flexion to the unaffected side, rotation to the affected side, and rotation to the unaffected side. Mean flexion error: post-stroke: 7.95 ± 6.76 degrees, control: 3.32 ± 2.27; mean lateral flexion error to the affected side: 6.13 ± 3.79, to the unaffected side: 5.32 ± 3.15, control: 3.57 ± 1.92; mean rotation error to the affected side: 8.25 ± 3.09, to the unaffected side: 9.24 ± 3.94, control: 5.41 ± 1.82. There was an only significant negative correlation between the repositioning error of lateral flexion and the Berg balance scale score to the affected side (-0.483) and to the unaffected side (-0.497). A strong correlation between balance and gait was found. Conclusion: The results of this study indicate that stroke patients exhibit greater trunk repositioning error than age-matched controls on all planes of movement except for extension. And lateral flexion has correlation with balance and gait.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.31-40
• /
• 2017

In this paper, we compared the efficiencies of national R&D investments between NT (Nanotechnology) areas in terms of papers, patents, and commercializations, and found ways to improve the efficiencies of national R&D investments for each NT area. This is in response to huge R&D investments government has made recently in NT areas. Here, we collected data on investments, papers, patents, and commercializations for the R&D projects in NT areas through National Science & Technology Information Service. Based on the data, we analyzed the investment and performances (papers, patents, and commercializations) for each NT area, calculated the efficiency for each NT area, and compared the efficiencies between NT areas. Next, using cluster analysis, we identified several NT areas with similar characteristics in terms of paper efficiency, patent efficiency and commercialization efficiency. Finally, we derived implications for the efficiency enhancement for each grouping. The cluster analysis showed that there could be two groups, one being low in terms of technological outcome (papers and patents) efficiencies and high in terms of commercialization efficiencies, while the other being high in terms of technological outcome (papers and patents) efficiencies and low in terms of commercialization efficiencies. Therefore, the strategy for one group calls for support for technology transfer or technology introduction from other R&D performers and grant of guidance for improving R&D performers' commercialization ability to other R&D performers while the strategy for the other group calls for R&D support for transfer of technology to other R&D performers, activation of technology transfer and support for commercialization of R&D performers.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.107-112
• /
• 2017

An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

• Clean Technology
• /
• v.18 no.3
• /
• pp.287-294
• /
• 2012

In this study, performances of two cleaning methods were analyzed and a cleaning system was designed to develop a cleaning process of electronic components to remanufacture old laser copy machine. First, plasma cleaning as a dry cleaning method was executed to test cleaning ability. In cleaning of printed circuit board (PCB) by plasma, some damages were found near the metal parts, and considering the productivity, this method was not adequate for the cleaning of electronic components. With 4 different cleaning agents, ultrasonic cleaning tests were executed to select an optimal cleaning agent, aqueous agents showed superior cleaning performance compared to semi-aqueous and non-aqueous agents. Cleaning with aqueous cleaning agent A and 28 kHz ultrasonic frequency can be completed in 30 sec to 1 min. Finally, an ultrasonic cleaning system was constructed based on the pre-test results. Optimal cleaning conditions of 40 kHz and $50^{\circ}C$ were found in the field test. The productivity and economic efficiency in remanufacturing of laser copy machine are expected to increase by adapting developed ultrasonic cleaning system.