• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.603-609
• /
• 2008

개발품의 품질을 평가하기 위해 무엇을 어떻게 시험할 것인가 적합한 모델을 정하는 것은 중요하다. 개발된 제품의 대부분의 패키지화된 소프트웨어는 소스코드를 공개하지 않으므로 외부적인 동작 특성을 측정하여 평가한다. 고속철도 선로변 정보처리 기기는 단일계로 구성되어 있던 것을 최근에 2중화하므로 신뢰성을 향상하도록 개발하였다. 철도에 사용되는 용품에 대하여 성능 및 안전성을 확보하기 위하여 철도안전법에서 공인시험기관에서 품질인증을 받을 수 있도록 하고 있어 우선 규정의 적용 가능성을 검토를 하였다. 아울러 정보처리모듈 일반 및 전용 그리고 절체기에 대하여 H/W 와 S/W의 검증을 위하여 필요한 절차와 성능을 확인하는 방안을 검토하고, TFM(Track-side Functional Module) Tester기와 Simulator를 활용하여 보드별 성능시험을 하는 방안에 대하여 고찰하고자 한다.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.209-214
• /
• 2016

This paper analyzes the magnetic property according to the machined shape of steel material with non-oriented silicon steel (50PN470/50A470), that is most commonly used in the design of electrical equipment. Toward this end, specimens were produced and divided into Bar-Specimen (Epstein Frame Tester) and Ring-Specimen (Toroidal Ring Tester). The characteristics of the electrical Silicon steel were measured using the instruments solely dedicated to measuring each specimen. The core loss of the Bar-Specimen, which is commonly used, was found to be less than that of the Ring-Specimen. This is a very important design factor in achieving the objectives of improving the product efficiency and predicting the performance of electrical equipment. It serves as a critical point of view in order to reduce the error between design value and product value. A comparative analysis was conducted regarding various characteristics (Hysteresis, B-H characteristic, Iron loss, Minor loop, Coercive force, Residual magnetic flux density, etc.) of the electrical silicon steel considered in the design of the electrical equipment according to the specimen.

• 한국정보통신학회논문지
• /
• 제12권11호
• /
• pp.1947-1953
• /
• 2008

본 논문은 차세대 네트워크로 진화과정에서 IP기반의 실시간 서비스를 통합하는 차세대 통합네트워크를 위한 시험기시스템에 관한 연구내용과 결과를 제시한 것이다. 호 제어처리 및 데이터전달 체계의 연동을 위한 차세대통합 네트워크의 각 구성요소들의 프로토콜 기능과 처리능력의 시험기시스템 설계를 위한 효과적인 방안과 그 타당성을 논의한다. 그리고 시스템에 요구되는 기능별 블록을 추출하고, 각 기능블록간 동작흐름을 포함하는 상위 수준의 시스템 구조를 제안하고, 이에 기반한 시스템과 세부기능들의 설치 및 구현 결과를 제시한다.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.662-669
• /
• 2006

The pneumatic muscle actuator consists of an air bellows tube with two end-flanges. The air bellows tube is made from rubber layers and flexible sheathing formed from nylon 6 fibers. This structure can be stretched or compressed to convert the radial expansive forces into contractile forces. We performed the finite element analysis and the performance test of pneumatic muscle actuator. Also, the pneumatic muscle actuator was manufactured and tested by home-made tester. The results of FEA was similar with performance test below the maximum error of 42 %.

• 설비공학논문집
• /
• 제16권4호
• /
• pp.340-348
• /
• 2004

The air and refrigerant side heat transfer performances are key parameters to improve heat transfer efficiency of the heat exchanger including the fan performance. Design of the fins, treatment of the tube inside, tube diameter and tube array effect heat transfer performance of the heat exchanger. The heat exchanger is used as a condenser at cooling mode and used as an evaporator at heating mode in the heat pump system. The heat pump system uses R410A as the refrigerant. The heat exchangers are consisted with 7 mm diameter tubes with slit-type fins. The study was conducted with variation of arrangement of the refrigerant path and air flow rate and refrigerant pressure drop and heat transfer rate were measured with a code tester. The capacity of the 3 path heat exchanger is more efficient than 2 or 4 path heat exchangers in heating or cooling modes.

• 자동차안전학회지
• /
• 제8권4호
• /
• pp.18-23
• /
• 2016

The objective of this study is to present the inspection standards of motorcycle brake system affecting motorcycle traffic accident. The inspection standards of motorcycle brake system recommended by CITA (International Motor Vehicle Inspection Committee) are studied. The brake performance for preventing the traffic accident is assessed by the brake efficiency. Considering the KMVSS (Korean Motor Vehicle Safety Standards) and the inspection standards of CITA, United Kingdom and Japan, the brake performance in the inspection standards of motorcycle is suggested. It is recommended that the efficiency of independent front and rear brakes are 40% and 27%, respectively. It is recommended that the efficiency of combined front and rear brakes is 50%.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.537-544
• /
• 2005

This paper presents the efficiency measurement and energy analysis for a parallel HEY. Using the HEV test rig, the efficiency of each powertrain component is measured for a given driving cycle including the regenerative braking system. Accompanied by the efficiency measurements, a detailed energy analysis is performed. Based on the efficiency measurement and energy analysis, a HEV performance simulator is developed. Using the simulator, the HEV performance is evaluated for a mild hybrid system. It is expected that the HEV simulator developed can be used to obtain further optimization potentials.

• 동력기계공학회지
• /
• 제9권3호
• /
• pp.44-49
• /
• 2005

The aerodynamic performance of an indoor room air-conditioner using a cross-flow fan is strongly influenced by the various design factors of a rear-guider and a stabilizer. The purpose of this study is to investigate the effects of a rear-guider and a stabilizer on the aerodynamic performance in the maximum flowrate range of a cross-flow fan. The design factors considered in this study are a rear-guider clearance, a stabilizer cutoff clearance, and a stabilizer setup angle, respectively. Aerodynamic performances including maximum flowrate and power show the biggest magnitude distribution in the case of $45^{\circ}$, the stabilizer setup angle as well as nearly similar magnitude distribution regardless of the stabilizer cutoff clearances. Moreover, the more a rear-guider clearance increases, the more the magnitude of maximum flowrate and power increases.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.137-143
• /
• 2016

OBJECTIVES : Bituminous materials, such as tack coat, are utilized between pavement layers for improving the bond strength in pavement construction sites. The standards regarding the application of bituminous material are not clearly presented in the Korean construction guideline without RS(C)-4. Hence, the objective of this study is to determine the optimum content of bituminous materials by analyzing interlayer shear strength (ISS) from the direct shear tester, which was developed in this research. The shear strength of tack coat was defined with the sort of bituminous materials. METHODS : The mixtures for the shear test were made using marshall mix design. The specimens were vertically and horizontally separated for the direct shear test. The separated specimens were bonded using bituminous material. The objectives of the experiment are to determine the performance of bond and shear properties resulting from slippage, rutting, shovel, and corrugation of asphalt pavements. A machine based on the Louisiana interlayer shear strength tester (LISST) of NCHRP Report-712 was developed to determine the ISS. The applied types of tack coat were RS(C)-4, AP-3, QRS-4, and BD-coat with contents of $0.3{\ell}/m^2$, $0.45{\ell}/m^2$, $0.6{\ell}/m^2$, and $0.8{\ell}/m^2$, respectively. RESULTS : Table 2 gives the results of the direct shear test using the developed shear machine. The BD-coat type indicated the highest average ISS value compared to the others. Between the surface and binder course, optimum tack coat application rates for AP-3, RS(C)-4, QRS-4, and BD-Coat were $0.6{\ell}/m^2$, $0.3{\ell}/m^2$, $0.6{\ell}/m^2$, and $0.45{\ell}/m^2$, respectively. These optimum contents were determined using the ISS value. CONCLUSIONS : The ISS values of AP-3, RS(C)-4, and QRS-4 showed similar tendencies when ISS increased in the range $0.3{\sim}0.6{\ell}/m^2$, while ISS decreased when the applied rate exceeded $0.6{\ell}/m^2$. Similarly, the highest ISS value of the BD-coat was observed when the applied rate was $0.45{\ell}/m^2$. However, shear strength was similar to the maximum value of ISS when the tack-coat application rate of BD-Coat exceeded $0.45{\ell}/m^2$.

• 전기전자학회논문지
• /
• 제18권1호
• /
• pp.114-118
• /
• 2014

본 연구에서는 디젤 차량용 통합형 연료히터와 성능검사 시스템구현을 통해 생산공정을 개선한다. 센서와 히터가 분리된 연료히터를 히터내에 센서를 안착시켜 통합함으로써 일체형 통합히터를 개발하고, 성능평가 시스템 개발을 통하여 시험한다. 이때 성능평가 시스템은 통합히터를 구성하는 body, upper plate, stopper, lower plate, PTC, screw, 바이메탈 및 외부 터비날의 특성을 분석하고, 통합히터의 생산성을 결정한다. 저온 유동성시험장치에서는 극저온에서 고온사이 동작검사, 시험저항 설정에 따른 저항동작지연 및 전류동작지연, 온도변화에 따른 바이메탈 지연 검사, 블록히터의 전류 및 저항 검사, 히팅 운전검사 등을 수행한다. 따라서 효율적인 생산공정 과정을 통해 연료히터의 성능을 개선하는 생산공정 개선 알고리즘을 제시한다.