• 한국통신학회논문지
• /
• 제34권6B호
• /
• pp.630-640
• /
• 2009

본 논문에서는 고성능 모바일 TFT LCD/OLED 모듈(이하, 모듈)을 위한 헨드헬드 검사장비를 제안한다. 기존 모듈 검사장비는 명멸현상을 구분하기 위해선 동영상 데이터를 모듈에 출력시켜 구분할 수 있으나, 저속 시스템으로는 불가능하다. 또한 기존 검사장치는 저속의 CPU와 FPGA 시스템에서 필요한 몇 가지의 기능을 IP로 설계하고 사용하기 때문에 시스템의 한계를 지니고 있다. 이에 제안한 시스템은 고성능 모바일 모듈을 위한 검사장비로 다양한 크기의 모듈을 H/W나 FPGA의 설계 변경 없이 검사 장비를 휴대하여 여러 가지 부가기능들을 동시에 확인할 수 있다. 시스템은 크게 헨드헬드 검사장비와 내장된 테스터 소프트웨어, 정밀 분석을 위한 PC기반의 소프트웨어로 구성되며, USB 인터페이스 하여 헨드헬드 검사장비의 모든 모듈 테스트 내용을 확인, 저장, 출력 할 수 있도록 설계되어 있다. 제안된 시스템의 유효성 검증은 현장에서 사용하는 9가지의 대표 항목으로 설정하여, 고성능 모바일 TFT LCD/OLED에서 중요한 명멸현상에 대한 풀 프레임 동영상 구동시 별도의 모듈 없이 확인이 가능하였고, 기타 스캔타임 설정, 감마설정, 레지스터 변경, 인터페이스 지원, 다 인치 모듈지원 등이 가능하였다.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.30-36
• /
• 2004

The development of LD(Laser Diode) tester and its control system based on the graphical programming language(LabVIEW) is addressed. The ill tester is used to check the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the Detector(optic fiber and photo diode) are very small, therefore the test device needs high accuracy. But each motion part of the test device could not accomplish high accuracy due to the limit of the mechanical performance. So, an image processing with machine vision is proposed to compensate for the error. By adopting our method we can reduce the error of position within $\pm$5$\mu\textrm{m}$.

• 한국산업정보학회논문지
• /
• 제20권4호
• /
• pp.67-73
• /
• 2015

최근 재료의 물성평가에 있어 표면마찰 특성이 많이 요구되고 있는 바, 본 연구에서는 휴대 가능한 보급형 마찰계수 시험기의 개발을 다루며, 이는 기구 설계 및 적용, 측정회로의 설계 및 배치, 마이크로프로세서 기반 펌웨어의 구성을 포함한다. 또한 기존의 규격 시험기와 성능 비교를 통하여 본 휴대용 마찰계수 시험기의 실 적용성을 보였다.

• 환경위생공학
• /
• 제12권1호
• /
• pp.77-83
• /
• 1997

An experimental research was conducted in order to study the treatment of waste reuse system using the membrane. Cell tester which supplied by Amicon was used to compare the fluxes of various membranes. Specially investigated items in the experiment were carried out by using 5 species of microfiltration membranes as to various MLSS concentrations. From the results, it is recognized from the cell test that 0.2 $\mu $m pore-sized membrane have the most effective performance at 2000mg/L of MLSS, and physical properties of membranes such as strength, deflection, elongation, structure of pore are more important than chemical properties in microfiltration membrane.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.198-203
• /
• 2001

This paper discusses an experimental method for measuring the insertion loss (IL) performance of a double panel that are used in vehicles. Instead of two adjacent reverberation chambers which are generally used to measure the transmission loss (TL) of the large sound isolation materials, air-borne sound insulation tester was utilized to determine the IL and articulation index (AI) of standardized deadening materials. In comparison to reverberation chamber method, air-borne sound insulation tester method is more space-saving, more time-saving and more simple to the automotive acoustics. From the empirical results, it is verified that the performance of deadening materials is closely connected with thickness of panels, type of filling material that is filled into a double panel, and area ratio of double panel.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1663-1667
• /
• 2003

This thesis is on tile development of LD(Laser Diode) chip tester and the control system based on graphical programming language(LabVIEW) to control the equipment. The LD chip tester is used to test the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the receiver(optic fiber) are very small. Therefore, in order to test each chip precisely, this tester needs high accuracy. However each motion part of the tester could not accomplish hish accuracy due to the limit of the mechanical performance. Hence. an image processing with machine vision was carried out in order to compensate for the error. and also a load test was carried out so as to reduce tile impact of load on chip while the probing motion device is working. The obtained results were within ${\pm}$5$\mu\textrm{m}$ error.

• Corrosion Science and Technology
• /
• 제3권6호
• /
• pp.240-244
• /
• 2004

Recently a variety of electrochemical techniques have been used for the measurement of under-film corrosion of coated steel. Each method has its own characteristic and is suitable to determine some kinds of anti-corrosive mechanisms of coating film. We developed a new under-film corrosion tester (UFCT) which adoped current interrupter technique in principle. Electrochemical parameters can be measured by UFCT. It is possible for the novel under-film corrosion tester to evaluate under-film corrosion of steel covered with high electric resistance coating film which has no defect and is not easy to evaluate it by other methods. Finally some experimental results of protective coating performance obtained by UFCT were discussed.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권11호
• /
• pp.536-541
• /
• 2000

Digital protective relay in power system play a prominent part. Simulators for the relay test were introduced in early 1980's. A number of open loop designs have been developed and recently, several developments of real-time simulators have been reported. But they are very high cost. And then they are difficult to apply for relay testing in small business. This paper presents the structure of low cost and performance of a new pc based tester for digital protective relay testing. The proposed tester was simulated of off-line with fault transient signals obtained from EMTP.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.913-918
• /
• 2006

난독증자란 의미적인 잘못으로 인하여 읽기능력에 문제를 가진 사람들이다. 국내에서는 난독증에 대한 이해가 부족하여, 난독증자를 검사하는데 있어 외국의 검사도구를 번역하여 사용하고 있다. 그러나 언어는 민족의 문화와 특성에 민감하기 때문에 국내 환자를 검사하기 위해 해외 검사도구를 사용하는 것은 적당하지 않다. 본 논문에서는 한국인 난독증자를 분류하고 분석하기 위한 난독증 검사도구의 모델을 제안한다. 또한, 성능평가를 통하여 구현된 검사도구의 특성들을 보인다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.143-149
• /
• 2009

Recently, according to the tendency to the more comfortable automobile, the improvement of performance of the cooling fan is required. The performance of cooling fan is affected by many peripheral parts, such as radiator, condenser, engine block and etc. Therefore, it is important to consider the effect of peripheral components on the fan performance in design and analysis stages. In this paper, the performance of automobile cooling fan is investigated experimentally by using the large capacity fan tester based on the ASHRAE and the AMCA standards. In particular, the various spacing between cooling fan and engine block are considered to obtain the effect of engine block. An empirical relation between the fan flow rate and the spacing was proposed.