• 에너지공학
• /
• 제23권3호
• /
• pp.1-6
• /
• 2014

The more or less homogeneous fuel-air mixture that exists at the end of the compression process is ignited by an electric ignition spark from a spark plug shortly before top dead center. The actual moment of ignition is an optimization parameter; it is adapted to the engine operation so that an optimum combustion process is obtained. Brake mean effective pressure (BMEP) of the spark ignition energy control device (IECD) than conventional spark system at the stoichiometric mixture is increased about 9%. For lean burn engine, the lean limit is extended about 25% by using the IECD. It was considered the stability of combustion by the increase of flame kernel according to the high ignition energy supplies in initial period and discharge energy period lengthen by using the IECD.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.28-35
• /
• 2002

The objective of this paper is to quantitatively investigate the effects of alcohol mixture on the combustion improvement of main fuel in supplying alcohol to direct injection diesel engine by auxiliary injection method and blend method. If alcohol is supplied, engine performance greatly improves in high load range. In case of supplying ethanol, BSFC improves, the emission of smoke and NO decreases by delaying main fuel injection timing 5$\^{C}$A. The maximum delivery quantity of alcohol is limited to approximately 50% of total fuel delivery due to misfire and knocking. The limit quantity of main fuel injection that does not accompany misfire and the deterioration of BSFC was approximately 15∼18.5mg/st.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.218-226
• /
• 1998

Recent trends and the effect of mechanical vibrations in optical disk drives are reviewed in this paper. The Nation from CD drives to high density DVD drives and the development of writable optical disk drives require tighter mechanical tolerance. The demand for faster access time and higher data transfer rate also leads to critical mechanical problems to limit the tracking and focusing servo performance. The current mechanical issues to limit the performance of the drives and various technologies to overcome the mechanical problems are introduced. Vibrations of disk-spindle system, actuator and suspension designs of the optical pick-up, and general mechanical designs for the fast and stable access mechanism are considered.

• 한국통신학회논문지
• /
• 제33권8C호
• /
• pp.569-574
• /
• 2008

잡음예측 최대유사도(NPML, Noise Predictive Maximum Likelihood) 검출기는 잡음 예측/백색화 과정을 비터비 검출기의 가지 메트릭 계산 과정에 삽입하여 데이터 검출의 신뢰성을 높인다. 본 논문에서는 고밀도 광기록 채널에서 밀도가 높아짐에 따라 고차 전달함수 다항식으로 요구되는 성능을 달성할 수 있음을 보인다. 모의실험을 통해 밀도마다 가장 적합한 PR 타겟값을 찾고, NPML 다항식 차수를 올려가며 BER을 측정하였다. 결과로 각 밀도에 따른 적절한 차수가 필요함을 보였다.

• 한국산업보건학회지
• /
• 제8권1호
• /
• pp.124-132
• /
• 1998

The Korean-made passive samplers were evaluated at the working environment for field testing. Tested materials were n-hexane, toluene and trichloroethylene. The performance of passive samplers depended on types and concentrations of organic vapors. Sampling rates were not steady until certain concentrations. The optimum concentration for determination of airborne toluene by passive samplers was equal to or over 10 ppm which is 1/10 of the Korean occupational exposure limit. Optimum concentration of n-hexane was equal to and over 1 ppm which is 1/50 of Korean occupational exposure limit. But for trichloroehtylene, coefficient of variation was 53.5 %. Passive samplers may be used for determination of n-hexane. For other materials, further study on the performance of Korean-made passive samplers is required.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1122-1130
• /
• 2000

Based on the value of the Lagrange multiplier and the degree of constraint activeness, a new update rule is proposed for penalty parameters of the ALM method. The theoretical exposition of this suggested update rule is presented by using the algorithmic interpretation and the geometric interpretation of the augmented Lagrangian. This interpretation shows that the penalty parameters can effect the performance of the ALM method. Also, it offers a lower limit on the penalty parameters that makes the augmented Lagrangian to be bounded. This lower limit forms the backbone of the proposed update rule. To investigate the numerical performance of the update rule, it is embedded in our ALM based dynamic response optimizer, and the optimizer is applied to solve six typical dynamic response optimization problems. Our optimization results are compared with those obtained by employing three conventional update rules used in the literature, which shows that the suggested update rule is more efficient and more stable than the conventional ones.

• 품질경영학회지
• /
• 제33권1호
• /
• pp.1-10
• /
• 2005

This paper develops a new VSI $\={X}-CRL$ synthetic control chart that considers convenience of use in the field, and perception of change of process applying VSI techniques to synthetic control chart, simultaneously. We found the optimal sampling interval and various control limit factor of the suggested chart using markov chain. Comparison and analysis is carried out between synthetic VSI $\={X}-CRL$ chart and other chart in the statistical aspect; $\={X}$ control chart, VSI $\={X}$ chart, another synthetic chart. In case that the process follows normal distribution, the proposed VSI $\={X}-CRL$ synthetic control chart in detecting process mean shift showed the best performance in aspect of statistical performance, regardless of control limit L of CRL/S control chart.

• 오토저널
• /
• 제10권4호
• /
• pp.66-74
• /
• 1988

The ignition quality of ignition system is influenced by spark energy, discharge pattern of spark energy and spark duration. In this paper, the characteristics of multiple spark ignition system have been investigated for various number of spark and spark interval. The results, which were compared with those obtained with a standard single spark ignition, show that engine output is increased, and lean misfire limit is extended with the multiple spark ignition system. The most effective number of spark at the most effective spark interval that are determined by engine performance test, were 6 times spark at 0.02ms spark interval. For the above condition of spark, engine torque was increased about 20% comparing with conventional ignition system and lean misfire limit was extended to air-fuel ratio 22.5:1. This study researched the rate of heat release and quantity of heat release influenced by a condition of spark on the mass burned in order to investigate the relationship between the rate of mass burned and number of spark times.

• Food Science and Biotechnology
• /
• 제18권6호
• /
• pp.1515-1518
• /
• 2009

The objective of this study was to compare 3 extraction methods including, solid phase extraction (SPE), acetonitrile extraction, and methanol extraction, for their usefulness as extraction methods to determine capsaicinoids. The determination of capsaicinoids in the extracts was carried out on a reverse-phased high performance liquid chromatography (HPLC) using a fluorescence detector. Three extraction methods, i.e., SPE, acetonitrile extraction, and methanol extraction were compared for the quantification of capsaicinoids using raw peppers and pepper powder. The highest analytical values were observed using methanol extraction and the lowest values using SPE. Also, the analytical method validation parameters such as accuracy, precision, limit of detection, limit of quantitation, and specificity were calculated to ensure the method's validity. This method provides a fast and accurate approach for the determination of capsaicinoids in peppers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.122-124
• /
• 1987

This paper presents a new algorithm in formulating a performance index for contingency selection method considering voltage security. Security limits defined-in terms of real power line flows and voltage magnitudes are considered in normalized subspaces where in critical contingencies are identified by a filtering algorithm using the infinite norm. Two types of limits, warning limit and emergency limit, are introduced for voltage and line flow. Usually performance indices have been constructed for real power line flows and voltages with each different criterion. This paper, however, presents a method that constructs them with the same criterion in use of the norm properties, so that we can assess security considering both of them. Rapid contingency simulation is performed using one iteration of fast decoupled load flows with LMML(Inverse Matrix Modification Lemma).