• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.541-562
• /
• 2011

In the design of earthquake resistant reinforced concrete (RC) structures, both flexural strength and deformability need to be considered. However, in almost all existing RC design codes, the design of flexural strength and deformability of RC beams are separated and independent on each other. Therefore, the pros and cons of using high-performance materials on the flexural performance of RC beams are not revealed. From the theoretical results obtained in a previous study on flexural deformability of RC beams, it is seen that the critical design factors such as degree of reinforcement, concrete/steel yield strength and confining pressure would simultaneously affect the flexural strength and deformability. To study the effects of these factors, the previous theoretical results are presented in various charts plotting flexural strength against deformability. Using these charts, a "concurrent flexural strength and deformability design" that would allow structural engineers to consider simultaneously both strength and deformability requirements is developed. For application in real construction practice where concrete strength is usually prescribed, a simpler method of determining the maximum and minimum limits of degree of reinforcement for a particular pair of strength and deformability demand is proposed. Numerical examples are presented to illustrate the application of both design methods.

• 한국유체기계학회 논문집
• /
• 제19권5호
• /
• pp.61-67
• /
• 2016

Turbine blade cooling is one of the major technologies to enhance the performance of gas turbine and combined cycle power plants. In this study, two cases of coolant pre-cooling schemes were applied in combined cycle power plant: decrease of coolant mass flow needed to cool turbine blade and increase of turbine inlet temperature (TIT). Both schemes are benefited by the decrease of coolant temperature through coolant pre-cooling. Under the same degree of pre-cooling, increasing TIT exhibits larger plant power boost and higher plant efficiency than reducing coolant flow. As a result, the former produces the same gas turbine power with a much smaller degree of pre-cooling than the latter. Another advantage of increasing TIT is a higher plant efficiency. Even with an assumption of partial achievement of the theoretically predicted TIT, the method of increasing TIT can provide considerably larger power output.

• 한국소음진동공학회논문집
• /
• 제17권8호
• /
• pp.708-719
• /
• 2007

In case of indoor gymnastics training floor, in view of its characteristics, since it is simultaneously required the related smooth communication between the coach and the player, also the acoustic performance regarding to the clearness of music, besides the sport activity, the consideration about the acoustic character has entered the stage as an indispensable element. On such viewpoint, recently constructed dome-typed gymnastic training floor was optimized acoustic design with remodeling through acoustic simulation test. And acoustic satisfaction degree and reaction was attempted to investigate about the gymnastics training floor estimating value of human's psychological(sensual) degree using auralization that enables to experience the virtual sound field at the stage of design. As the result of investigation about the research on the space of object, it could be known that the valuation regarding to the acoustic performance of 'after-improvement' was distinctly more refined than that of 'before-improvement'. It is now considering that such result of the study can be utilized as the useful data which enables to improve the retrenchment effect of the construction cost as well as the acoustic capability, by means of the prediction control on the acoustic problem from the stage of design, for the occasion when the similar indoor sport gymnasium is planning to build for the near future.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.277-280
• /
• 2006

Most real world design evaluation and risk-based decision support combine quantitative and qualitative (linguistic) variables. Decision-making based on conventional mathematics that combines qualitative and quantitative concepts always exhibit difficulty in modelling actual problems. The successful selection process for choosing a design/procurement proposal is based on a high degree of technical integrity, safety levels and low costs in construction, corrective measures, maintenance, operation, inspection and preventive measures. However, the objectives of maximising the degree of technical performance, maximising the safety levels and minimising the costs incurred are usually in conflict, and the evaluation of the technical performance, safety and costs is always associated with uncertainties, especially for a novel system at the initial concept design stage. In this paper, a design-decision support framework using a composite structure methodology grounded in approximate reasoning approach and evidential reasoning method is suggested for design evaluation of machinery space of a ship engine room at the initial stages. It is a Multiple Attribute Decision-Making (MADM) or Multiple Criteria Decision Making (MCDM) framework, which provides a juxtaposition of cost, safety and technical performance of a system during evaluation to assist decision makers in selecting the winning design/procurement proposal that best satisfies the requirement in hand. An illustrative example is used to demonstrate the application of the proposed framework.

• KIEAE Journal
• /
• 제12권1호
• /
• pp.113-118
• /
• 2012

The photovoltaic is one of the most important sustainable technologies appliable to architectures. The power performance mainly depends on the installation conditions of them. This study aims to evaluate the power performance of photovoltaic system by the installation conditions, the tracking methods and reflecting mirrors. For the study, the Solar Pro computer simulations have been conducted on installation angles, solar azimuth and solar altitude. Also, the field mock-up tests are performed to of its application to verify the simulation results. Both the results of the experiment and the simulation have proved that the efficiency of 90-degree fixed angle method was higher than that of 30-degree fixed angle, the efficiency of altitude tracking was better than that of azimuth tracking method, and changing both the altitude and the azimuth together is more efficient rather than the shortened tracing way. In addition, the light-concentrating method in which the incidence angle of the sun is controlled by an adhered reflector has been analyzed to have better efficiency than the general method of tracing according to the orbit of the sun. Therefore, this thesis is expected to offer the basic data to set a more effective tracing-type of photovoltaic power generation system in the future. For this, more researches are to be conducted hereafter on a high efficiency drive motor and the establishment of an economic system.

• 한국항공우주학회지
• /
• 제32권9호
• /
• pp.80-87
• /
• 2004

향후 인공위성의 정밀 자세지향 요구가 매우 높아짐에 따라 궤도상의 위성에서 발생하는 고주파 진동인 지터 (Jitter) 의 능동적인 재어가 중요한 문제로 대두되고 있다 . 지터는 탑재체의 성능을 저하시키는 주요 요인이다. 지난 10년간 수동식 및 능동식의 지터 제어 방법이 연구되어 왔다. 본 연구에서는 모텔 장치에 대한 능동식의 지터 분리에 대한 기법을 소개하기로 한다. 모델 장치는 피드백 제어의 원리를 기반으로 3 자유도의 운동을 통해 능동적인 제어가 가능하게 해준다. 이를 위해 시스템의 수학적 모델링을 수행하고 확보된 모델은 기본적인 제어기 설계에 이용된다. 설계된 제어법칙은 시뮬레이션을 통해 그 성능을 검증하도록 한다.

• 항공우주기술
• /
• 제10권1호
• /
• pp.98-106
• /
• 2011

본 논문에서는 롤 자세운동이 발생하는 상황에서 안정적인 피치/요 자세제어를 위한 항법쿼터니언 기반 자세제어기 구조를 설계하고, 발사체 6자유도 시뮬레이션을 통해 설계된 제어기의 성능평가를 수행하였다. 항법쿼터니언 자세제어기는 기존 KSR-III, KSLV-I 상단부 자세제어기 설계 경험을 기반으로 고안되었고, 탑재소프트웨어 내에서 효율적인 자세제어 변수 사용 및 KSR-III, KSLV-I 상단부 제어기와 동일한 성능 확보 관점에서 설계되었다. 제안된 새로운 자세제어기 타당성 분석을 위하여 방위각 전환을 위한 롤 기동, 롤 자세제어가 수행되지 않는 두 비행조건에 대해 6자유도 시뮬레이션을 수행, 자세제어 성능을 평가하고 탑재 소프트웨어로서 적용 가능성을 확인하였다.

• Asia pacific journal of information systems
• /
• 제13권3호
• /
• pp.173-193
• /
• 2003

As the interest in the business-to-business(B2B) electronic commerce is increasing, some companies are participating in the B2B eMarketplaces(electronic marketplaces). The eMarketplace has an effect on the method of B2B transactions or the purchasing performance. The academy and the industry are focused on the cause and the result of this effect. The purpose of this research is to analyze the effects of the relational exchange with eMarketplace on the purchasing performance, considering the supply externality and system integration as intervening variables. This study investigates the second-order effect of eMarketplace in which the degree of improvements in two aspects of purchasing activity(price reduction, purchasing efficiency) depends on the degree of the relational exchange with eMarketplace, namely, the governance of eMarketplace. Our hypotheses on this second order effect were supported. We found that the higher the relational governance, the lower in price reduction, and the better in purchasing efficiency. In more details, the high relational governance lowers the supply externality, and in turn deteriorates the improvement in price reduction. Meanwhile, the high relational governance accelerates the information system integration, and brings the better purchasing efficiency. Our findings suggest that organizations can improve their purchasing activities better if they choose the appropriate eMarketplace governance.

• 가정과삶의질연구
• /
• 제14권2호
• /
• pp.215-226
• /
• 1996

The purpose of this study is to provide basic data needed to examine the relationship between father and son by investigating correlations among male college students' perceptions of the degree of closeness to their fathers their fathers' paternal role and their own paternal role in the future. The subjects of this study were 474 male college students(sophomores juniors and seniors) from Seoul and Daegu. The questionaire the means of this research is composed of classified questions on related studies and on the researches of reference literatures, Statistical methods applied for data analysis were frequencies mean standard deviation Pearson's correlation. Major findings are as follows; 1) When a son perceives that he is on intimate terms with his father he perceives that his father performs paternal role well. Intimate relation between the father and the son can be considered essential to good performance of paternal role. 2)When a son perceives that he is on intimate terms w th his father he believes that he will perform his own paternal role will in the future. That is the son seems to accept his future paternal role positively as he feels close to his father. 3) Male college students who perceive their fathers' paternal role is properly performed tend to believe they will perform their own paternal role well in the future. Judging from the relation between fathers' performance of paternal role and sons' perception of thir future paternal role we can say good performance of paternal role is important is building up sons' affirmative perception of paternal role.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.103-106
• /
• 2006

This study investigates spalling properties of 60MPa class, high performance concrete, made with the various influential parameters, such as, blaine of cement, mineral admixture and polypropylene(PP) fiber contents. Totally 21 parameters of ${\phi}100{\times}200mm$ in size was fabricated; three specimens for variance in blaine of cement, 4 specimens for combination of mineral admixture type, along with 0.05, 0.1, 0.15% of fiber adding ratio. After that, one hour unloading fire test was conducted, and then spalling appearance and spalling degree of specimens was examined. Test showed that a specimen made with high blaine of cement(H) improved early strength but exhibited similar value to a specimen made with low blaine(L) at the age of 28 days, thus indicating comparable spalling appearance. In conclusion, spalling easily occur in higher strength and smaller particle shape of cement and mineral admixture.