• Journal of The Korean Ophthalmological Society
• /
• v.59 no.11
• /
• pp.1017-1023
• /
• 2018

Purpose: A recently introduced phacoemulsification system, the WhiteStar $Signature^{(R)}$ PRO, has demonstrated improved nucleus followability and cutting efficiency via an improved pump regulator with a higher reaction response and an automatic occlusion sensing system. In this study, we compared various phacoemulsification parameters between the new system and an older version of the device. Methods: A total of 80 eyes of 68 patients with cataracts who had undergone phacoemulsification by a single surgeon were included in this study. Forty eyes of patients underwent phacoemulsification using the older $Signature^{(R)}$ system (WhiteStar); these patients were classified as the control group. Another 40 eyes of patients underwent phacoemulsification with the newer enhanced system, the WhiteStar $Signature^{(R)}$ PRO; these patients were assigned to the experimental group. During the operation, operative parameters, including the effective phaco time (parameter of effective phaco time with a specific coefficient for the transversal movement expressed in seconds, EFX), ultrasound time (seconds [s]), effective phacoemulsification time (EPT, s), average phacoemulsification power (AVG, %), and balanced salt solution usage, were measured to determine the performance enhancement offered by the updated system. Central corneal thickness was measured before and after surgery to compare corneal edema. The relationships between the two groups were analyzed using an independent t-test. Results: The Signature $PRO^{(R)}$ system showed a lower EFX (p < 0.001), a shorter EPT (p < 0.001), and a smaller AVG (p < 0.001). Postoperative corneal thickness did not differ significantly between the two groups. Conclusions: Comparing the efficacy of the improved reaction speed of the device and automatic occlusion sensing system in performing phacoemulsification, the updated Signature $PRO^{(R)}$ system demonstrated superior followability and cutting efficiency regardless of nuclear cataract hardness.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.299-303
• /
• 2008

An Oriental lily cultivar 'Pacific Wave' was released in 2007 at National Institute of Horticultural and Herbal Science, Rural Development Administration (RDA), Suwon, Korea. The crossing was made in 1999 between Oriental lily 'Simplon', an outward-facing and white colored cultivar, and 'Spinoza', pink colored cultivar. The first selection was done in 2003 with a line of 'O-03-16'. Multiplication and bulb growth, and performance test was conducted from 2004 to 2006. This selection was later on given as 'Pacific Wave' in 2007 at NHRI. Flowering time of 'Pacific Wave' in plastics house culture is mid June and grows average 115 cm. Flowers are upward-facing with 20.1 cm in diameter and white with yellow centered (RHS W155C + Y9A). Mean petal length and width is 12.2 cm and 4.2 cm, respectively. Leaves are 12.3 cm long, 2.9 cm wide. The throat color is green. It shows gray and purple stigma, and red brown pollen. The weight and size of bulb is 82.5 g and 19.6 cm, respectively. Year-round flowering can be by storing the bulb under -1 to $-2^{\circ}C$ conditions. It is necessary to add calcium to the fertilizer or remove side scales to prevent leaf scorch. It is needed to control Botrytis disease in summer wet season.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.209-213
• /
• 2019

Recently, demand for high energy density and long cycling stability of energy storage system has increased for application using with frequency regulation (F/R) in power grid. Supercapacitor have long lifetime and high charge and discharge rate, it is very adaptable to apply a frequency regulation in power grid. Supercapacitor can complement batteries to reduce the size and installation of batteries. Because their utilization in a system can potentially eliminate the need for short-term frequent replacement as required by batteries, hence, saving the resources invested in the upkeep of the whole system or extension of lifecycle of batteries in the long run of power grid. However, low energy density in supercapacitor is critical weakness to utilization for huge energy storage system of power grid. So, it is still far from being able to replace batteries and struggle in meeting the demand for a high energy density. But, today, LIC (Lithium Ion Capacitor) considered as an attractive structure to improve energy density much more than EDLC (Electric double layer capacitor) because LIC has high voltage range up to 3.8 V. But, many aspects of the electrochemical performance of LIC still need to be examined closely in order to apply for commercial use. In this study, in order to improve the capacitance of LIC related with energy density, we designed new method of pre-doping in anode electrode. The electrode in cathode were fabricated in dry room which has a relative humidity under 0.1% and constant electrode thickness over $100{\mu}m$ was manufactured for stable mechanical strength and anode doping. To minimize of contact resistance, fabricated electrode was conducted hot compression process from room temperature to $65^{\circ}C$. We designed various pre-doping method for LIC structure and analyzing the doping mechanism issues. Finally, we suggest new pre-doping method to improve the capacitance and electrochemical stability for LIC.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1107-1111
• /
• 2011

Organic fertilizers application has become a popular alternatives to reduce the dependence on chemical fertilizer in Korean farming systems. In this study, we evaluated the nitrogen (N) use efficiency and growth performance of Chinese cabbage grown by black vinyl mulching after application of organic and chemical fertilizers compared with no-mulching. The treatments included chemical fertilizer alone as control (NPK, N-$P_2O_5-K_2O$ : $320-78-198kg\;ha^{-1}$), organic fertilizer alone (OF100), 70% organic fertilizer and 30% chemical fertilizer (OF70+N30), and 30% organic fertilizer and 70% chemical fertilizer (OF30+N70), which were all applied in the no-mulching plots and in plots with black vinyl mulching. Daily means soil temperature was $2^{\circ}C$ higher in the black vinyl mulched treatments throughout the 54 days compared with no-mulched treatments. OF100 with black vinyl mulching gave highest soil inorganic N content. Also, Chines cabbage yield increased 46% by black vinyl mulched compared with no-mulching in OF100 treatment. Without mulching, N use efficiency was, 44, 26, 29, and 27% in NPK, OF100, OF70+N30, and OF30+N70, respectively. However, black vinyl mulching much more effectively increased N use efficiencies by 56, 55, 51, and 39% in the same treatments in the order as mentioned above. Conclusively, combined organic and chemical fertilizers application with black vinyl mulching could be good practical technique to reduce a amount of used nitrogen because of its greater ability to enhance N use efficiency.

• The Korean Journal of Archival Studies
• /
• no.26
• /
• pp.63-93
• /
• 2010

This document illustrates the culture of archives should be improved to get better in local autonomy. In 1994, the municipal elections were held to perform autonomous activities in Korea. It has been sixteen years, since the first municipal election had been held. The local autonomy can be accomplished well, based on the economic independence from the central government and growing awareness of locals. Not only that, if local records were well archived and suitably used, autonomy could be more active. However, since the independence from Japan in 1945, records of the self-government has not been archived well. Not only archives of local government have not been established, but also organization, budget and professional staff have not been arranged well. This brought about local records administration's inactive performance. As a result, numerous number of meaningful records are lost and people are difficult to make out the local administration policy. If the records of local government preserved well, administrative efficiency, responsibility, transparency can be realized in better way. When local officials' work experiences and achievements were on record and referred to a successor of officials properly, administrative efficiency would be highly promoted. In addition, with the well-preserved work records, people are able to see where the responsibility lies. A local autonomous entity might be able to obtain administrative transparency by showing administrative processes and results to locals to the public. In this manner, the premise to archive the records of local autonomous entity is to establish a department which can archive local records and the disposition of professional archivists. According to "the law on public archives management", the governor of a province should discuss with a minister of administration to set up plans for archives' establishment and management. In this way, local archives administration would work well, when not only the department of local records administration is established, but also the department of local archives places local records under their control at the same time. Moreover, based on active records movement, municipal officials and locals would realize the importance of local record and examine local records administration systems. Not only that, when local records are shown to public and utilized properly, the local autonomy would improve a lot.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.270-285
• /
• 2016

Various opinions and discussions have been actively in progress which are connected with cultural heritage since 'Sustainable Development Goals, SDGs' was announced by UN Sustainable Development Summit 2015 as Post-2015 Development Agenda. Apart from SDGs, conservation of cultural heritage itself stands on the basis of sustainability that originality, characteristic, diversity of cultural heritage should be permanently preserved. From that point of view, it is necessary to understand practical ODA for cultural heritage, far from theoretical approaches and policies. This paper is intended to look into the domestic and overseas situation related to ODA of Asian cultural heritage and the mentioned problems, future plans and challenges. First, the background and concepts about ODA were described and then ODA projects which have been carried out by Japan and China as typical ODA countries for Southeast Asia were introduced. ODA of cultural heritage in Korea has relatively recently started for restoration work for historic sites of Laos and Cambodia and its scale and performance do not come to much yet. Therefore, to develop ODA of cultural heritage, there are suggestions as in the followings. First, it is necessary to have a long-term master plan of ODA projects for sustainability of cultural heritage. Second, based on the view from the long-term perspective, the selection and focus for ODA partner countries should be considered, avoiding short-term projects aiming at a number of countries. Not widespread existing projects by other countries, but the model of Korean ODA for cultural heritage only Korea can conduct should be prepared. The next thing is connection with sustainability, and ultimately the conservation of cultural heritage should result in benefit to the natives by giving an impetus to economy as well as fostering tourism of local areas. To accomplish that connection, educational training and building capacity are suggested as the most suitable alternatives. Cultural heritage of each country reflects its indigenous originality and characteristics, therefore, the restoration work should be conducted by people in each country as the best way. From this point of view, ACPCS held by National Research Institute of Cultural Heritage will take a role of a specialized training program in Korean way. Lastly, establishment of a control tower for ODA in Korea is necessary. JCIC(Japan Consortium for International Cooperation in Cultural Heritage), which was set up in Japan for sharing information, establishment of cooperation system and prevention of overlapped projects will be an example we can take into consideration.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.297-303
• /
• 2018

With the changing trend of the building construction to high rising and large scaling, the underground structure has been increased, and its usage also increased and variety. Hence, to protect the underground structure against underground water, various water proofing methods has been developed. Among the many water proofing methods, the combined water proofing method using both asphalt seal and sheet has been widely used to secure the sufficient performance and decrease the construction failure. However, during the summer period of extremely high temperature conditions, the asphalt sealing materials were separated and leaked into the structure. Therefore, the aim of the research is to provide the quality standard of asphalt sealing material based on the various temperature changes depending on seasons. According to the experimental results, the temperature of the sealing materials applied on the slab was increased up to $54^{\circ}C$ which was $3^{\circ}C$ higher than the structure temperature of $51^{\circ}C$. Based on the melting test for asphalt sealing materials applied on the outside wall of the structure, in the case of water-dispersing typed materials showed significant melting down due to its slow evaporation and low viscosity. Furthermore, from the accelerated test conducted indoor conditions, a solvent-type and water-dispersing typed materials showed significant melting down due to their low viscosity and melting point in ambient conditions. Based on these results, viscosity and melting point are found as the important factors on asphalt sealing materials' quality, and it is necessary to designate the quantitative level of the viscosity and melting point for quality control.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.737-743
• /
• 2018

Patient exposure dose exposure test, which is one of the items of accuracy control of Computed Tomography, conducts measurements every year based on the installation and operation of special medical equipment under Article 38 of the Medical Law, And keep records. The CT-Dose phantom used for dosimetry can accurately measure doses, but has the disadvantage of high price. Therefore, through this research, the existing CT - Dose phantom was similarly manufactured with a 3D printer and compared with the existing phantom to examine the usefulness. In order to produce the same phantom as the conventional CT-Dose phantom, a 3D printer of the FFF method is used by using a PLA filament, and in order to calculate the CTDIw value, Ion chambers were inserted into the central part and the central part, and measurements were made ten times each. Measurement results The CT-Dose phantom was measured at $30.44{\pm}0.31mGy$ in the periphery, $29.55{\pm}0.34mGy$ CTDIw value was measured at $30.14{\pm}0.30mGy$ in the center, and the phantom fabricated using the 3D printer was measured at the periphery $30.59{\pm}0.18mGy$, the central part was $29.01{\pm}0.04mGy$, and the CTDIw value was measured at $30.06{\pm}0.13mGy$. Analysis using the Mann - Whiteney U-test of the SPSS statistical program showed that there was a statistically significant difference in the result values in the central part, but statistically significant differences were observed between the peripheral part and CTDIw results I did not show. In conclusion, even in the CT-Dose phantom made with a 3D printer, we showed dose measurement performance like existing CT-Dose phantom and confirmed the possibility of low-cost phantom production using 3D printer through this research did it.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.431-438
• /
• 2021

To prepare more stringent regulations for USCG Phase II ballast water management, this study investigated the staining efficiency of SYBR Green I(SGI) and SYBR Gold(SG) on the virus-like particle (VLP). A dye with high staining efficiency was applied to the treated water that was passed through the ballast water treatment system (BWTS). VLP staining was observed most clearly under the 100-fold and 200-fold dilution of the stock solution when the volume of filtered samples was 0.5 mL to 2 mL. The staining efficiency of SGI and SG did not show a significant difference. On the other hand, the green fluorescence of viruses in the sample stained with SGI was more pronounced than in the samples stained with SG (expressed yellow fluorescence), making it easier to observe. The abundance of VLP in the test water and control water treatments that did not pass through the two types of BWTS (electrolysis type, UV + electrolysis type) was approximately 109 - 1010 VLP 100 mL-1. In contrast, no stained VLP was observed in the treated water treatments. Moreover, SGI was confirmed to be effectively stained under various salinity conditions, including seawater, brackish water, and freshwater. Further verification tests and development of staining methods under various BWTS are required, but the SGI staining method is believed to be a good alternative to the VLP live/dead determination of the USCG Phase II type approval test.