• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.339-345
• /
• 2021

In this paper, estimation angle performance analysis of amplitude-comparison monopulse radar under additive noise effect is dealt with. When uncorrelated white noises are added to the squinted beams, the angle estimation performance is analyzed through the mean square error(MSE). The numerical integration-based mean square error result completely overlaps the Monte Carlo-based mean square error result, which corresponds to 99.8% of the Monte Carlo-based mean square error result. In addition, the mean square error analysis method based on numerical integration has a much faster operation time than the mean square error method based on Monte Carlo. the angle estimation performance of the amplitude comparison monopulse radar can be efficiently analyzed in various noise environments through the proposed numerical integration-based mean square error method.

• Journal of Technology Innovation
• /
• v.12 no.2
• /
• pp.21-46
• /
• 2004

Focusing on a product, this paper reconstructs the concept of technological systems first introduced by Carlsson and Stankiewicz (1991). Based on the model and our earlier works, we compare the salient features of technological systems for computer numerically controlled (CNC) machine tools in Korea, Sweden, and the United States.. We also try to measure the performance of the systems in an international comparison. Major findings are as follows: (1) The length of 'learning period' for local (national) technological system is substantial, even though it is a catching-up case. (2) The key success factor of the technological system appears to be the connectivity among various actors or infrastructures, rather than just the existence or formation of those. (3) In three countries' experience, the government played an important role in the formation of each own technological system. (4) The performance of Korea's technological system for CNC machine tools during the past two decades(1981-97) seems to be better than that of Sweden and the U.S. Lastly, many policy implication are presented.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.182-191
• /
• 2011

Genetic algorithms (GA) and particle swarm optimization (PSO) are the most famous optimization techniques among various modern heuristic optimization techniques. These two approaches identify the solution to a given objective function, but they employ different strategies and computational effort; therefore, a comparison of their performance is needed. This paper presents the application and performance comparison of the PSO and GA optimization techniques for a static synchronous series compensator-based controller design. The design objective is to enhance power system stability. The design problem of the FACTS-based controller is formulated as an optimization problem, and both PSO and GA optimization techniques are employed to search for the optimal controller parameters.

• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.163-166
• /
• 2003

In conventional patchwork, the difference of the mean values of two groups is compared for watermark detection. We propose two modified patchwork schemes based on order statistics, which achieves significant improvements over conventional patchwork. First, we propose that the mean comparison is replaced by the median comparison, to get PSNR improvement due to informed watermarking. Second, we propose a majority voting scheme of a sequential comparison of pixel pairs in a sorted order, which produces significantly lower BER. The performance improvements are mathematically analyzed and tested. In experimental results, PSNR is about 5㏈～10㏈ higher in the first method and BER is about 1/5～l/2 times lower in the second method than conventional patchwork.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.785-786
• /
• 2006

Performance comparison of IPMSMs with distributed and concentrated winding is presented in this papcr. Two IPMSMs have been designed and fabricated with identical rotor dimension, air-gap length, series turn number, stator outer radius, and axial length except winding configuration. Basic parameters and machine performance, such as resistances, back emf, output torque, and efficiency, are compared. From the comparison results, motor design considering winding configuration is discussed.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.408-413
• /
• 2008

This study presents comparison of the air side heat transfer and friction characteristics in a heating condition between Louver fin-tube heat exchangers and aluminum heat exchangers. Experiments are performed for the Louver fin-tube heat exchangers and aluminum heat exchangers using a calorimeter, which is designed based on air-enthalpy method described in ASHRAE standards. The air velocities its are varied from 0.7 to 1.6 m/s with 0.3 m/s interval. A study result shows that the heat transfer performances of aluminum heat exchangers are $40{\sim}80%$ higher than those of Louver fin-tube heat exchangers per unit volume, mass and heat transfer area.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.47-54
• /
• 1993

This paper describes briefly the effect of ultrasonic fuel supply device on the performance of four stroke cycle gasoline engine. Experiments were carried out to clarify the effect of ultrasonic fuel supply device on the engine output, traveling fuel consumption ratio, exhaust emissions. The results were obtained as follows: 1.Engine output was increased 9-14% in comparison with that of the conventional injector. 2.Travelling fuel consumption ratio was improved 17-29% in comparison with that of the conventional injector. 3. CO, HC exhaust emissions was decreased compared to the value of the conventional injector. 4.Fuel consumption ratio in highway driving test was improved about 10% in comparison with that of the conventional injector.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.210-212
• /
• 2011

Human Computer Interaction is rapidly growing in different aspects and areas. One of the areas that grab many scholars and researchers interest is usability. Usability is a main factor and critical pillar of products success and acceptance. In this paper, we deeply analyze the current usability models that measure the user performance during the interaction with products. Then, we fairly compare between each model to discover and present the strength and weakness of each model for supporting developer and business organization with guidelines during the development process of the products before launching the actual and final one. Decomposing comparison between each model is performed based on specific criteria. Comparison is tabulated, graphically depicted, and analytically decomposed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.10
• /
• pp.1247-1254
• /
• 2004

In momentum exchange theory the loss models for the circulatory flow is critically important. But because of lack of loss model on the circulatory flow, analysis model on regenerative turbomachines is not available in the open literature. In the present study circulatory loss is evaluated by combining bend's losses. Through the comparison with the previous experimental data on linear pressure gradient, a combination factor is suggested in terms of the aspect ratio of a channel. Applying this factor to two kinds of regenerative blowers the predicted results are found to be in good agreement with the experimental data of the overall performance and the head distribution along the rotational direction. Especially, the comparison with the head distribution demonstrates the accuracy of hydraulic model and loss model suggested in the present study. And the comparison with the overall performance confirms the validness of physical models as well as loss models suggested in the present study.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.23-28
• /
• 1992

The purpose of this paper is to develop a new adaptive echo canceller improving convergence speed and near-end-talker detection performance of the conventional echo canceller. In a conventional adaptive echo canceller, an adaptive digital filter with TDL(Tapped-Delay Line) structure modelling the echo path uses the LMS(Least Mean Square) algorithm to cote the coefficients, and NET detector using energy comparison method prevents the adaptive digital filter to update the coefficients during the periods of the NET signal presence. The convergence speed of the LMS algorithm depends on the eigenvalue spread ratio of the reference signal and NET detector using the energy comparison method yields poor detection performance if the magnitude of the NET signal is small. This paper presents a new adaptive echo canceller which uses the pre-whitening filter to improve the convergence speed of the LMS algorithm. The pre-whitening filter is realized by using a low-order lattice predictor. Also, a new NET signal detection algorithm is presented, where the start point of the NET signal is detected by computing the cross-correlation coefficient between the primary input and the ADF(Adaptive Digital Filter) output while the end point is detected by using the energy comparison method. The simulation results show that the convergence speed of the proposed adaptive echo canceller is faster than that of the conventional echo canceller and the cross-correlation coefficient yield more accurate detection of the start point of the NET signal.